[Tue Sep  4 00:58:58 2012] Detection parameters:
  Position = (494.6, 292.2) = 12 28 11.68 2 1 4.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.0 +/- 9.4
  Background counts = 9.5
  Rate = 0.002 +/- 0.0003

[Tue Sep  4 00:58:59 2012] Off-axis axis estimate = 14.23'
[Tue Sep  4 01:13:41 2012] Using EEF radius (= 13.54 ")to estimate initial spatial extent for simple fitting
[Tue Sep  4 01:13:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep  4 01:13:41 2012] Initial guess for spatial extent in simple fitting = 13.54"
[Tue Sep  4 01:13:41 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.938
[Tue Sep  4 01:13:41 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 13.54"
[Tue Sep  4 01:33:06 2012] fullrun_mos1_xmm0414191001_pi300-10000_cl_pass0_src15.ximg exists
[Tue Sep  4 01:33:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414191001_pi300-10000_cl_pass0_src15.csv
[Tue Sep  4 01:33:06 2012] fullrun_mos1_xmm0414191001_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue Sep  4 01:33:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414191001_pi300-10000_cl_pass0_src15.csv
[Tue Sep  4 01:33:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0414191001_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0414191001_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 01:33:06 2012] fullrun_mos1_xmm0414191001_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue Sep  4 01:33:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414191001_pi300-10000_cl_pass0_tfrozen_src15.csv
[Tue Sep  4 01:33:06 2012] fullrun_mos1_xmm0414191001_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Sep  4 01:33:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414191001_pi300-10000_cl_pass0_tfrozen_src15.csv
[Tue Sep  4 01:33:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0414191001_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0414191001_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 01:33:10 2012] Spatial fit model total counts = 160.518000, observed total counts = 125.000000
[Tue Sep  4 01:33:10 2012] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Sep  4 01:33:10 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:33:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:33:10 2012] Assessing source extent using major
[Tue Sep  4 01:33:10 2012] Source does appear to be extended
[Tue Sep  4 01:33:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 01:33:10 2012] Deleting source due to low Poisson probability 0.8