[Wed Nov 30 07:48:37 2011] Detection parameters:
  Position = (280.3, 303.0) = 12 29 10.33 2 5 6.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1203.0 +/- 57.0
  Background counts = 226.6
  Rate = 0.05 +/- 0.002

[Wed Nov 30 07:48:37 2011] Off-axis axis estimate = 1.35'
[Wed Nov 30 08:05:37 2011] Using EEF radius (= 7.10 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 08:05:37 2011] Initial guess for spatial extent in simple fitting = 7.10"
[Wed Nov 30 08:05:37 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.879
[Wed Nov 30 08:05:37 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 7.10"
[Wed Nov 30 15:54:31 2011] fullrun_pn_xmm0414190701_pi300-10000_cl_pass0_src4.ximg exists
[Wed Nov 30 15:54:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414190701_pi300-10000_cl_pass0_src4.csv
[Wed Nov 30 15:54:31 2011] fullrun_pn_xmm0414190701_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Nov 30 15:54:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414190701_pi300-10000_cl_pass0_src4.csv
[Wed Nov 30 15:54:31 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0414190701_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0414190701_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 15:54:31 2011] fullrun_pn_xmm0414190701_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Nov 30 15:54:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414190701_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Nov 30 15:54:31 2011] fullrun_pn_xmm0414190701_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Nov 30 15:54:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414190701_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Nov 30 15:54:31 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0414190701_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0414190701_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 17:40:16 2011] Spatial fit model total counts = 6786.140000, observed total counts = 9670.000000
[Wed Nov 30 17:40:16 2011] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Nov 30 17:40:16 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 17:40:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 17:40:16 2011] Assessing source extent using major
[Wed Nov 30 17:40:16 2011] Source does appear to be extended
[Wed Nov 30 17:40:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 17:40:38 2011] Using EEF radius (= 7.10 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 17:40:38 2011] Initial guess for spatial extent in simple fitting = 7.10"
[Wed Nov 30 17:40:38 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.879
[Wed Nov 30 17:40:38 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 7.10"
[Wed Nov 30 18:26:38 2011] fullrun_pn_xmm0414190701_pi300-10000_cl_pass1_src4.ximg exists
[Wed Nov 30 18:26:38 2011] fullrun_pn_xmm0414190701_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Nov 30 18:26:38 2011] Fit fullrun_pn_xmm0414190701_pi300-10000_cl_pass1_src4 appears to have run properly
[Wed Nov 30 18:26:38 2011] fullrun_pn_xmm0414190701_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Nov 30 18:26:38 2011] fullrun_pn_xmm0414190701_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Nov 30 18:26:38 2011] Fit fullrun_pn_xmm0414190701_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Nov 30 19:44:42 2011] Source 4 is offset by 2.875354 and -6.239237 pixels which is larger than
2 X fitted extent = 3.775117 x 3.775117, not incorporating fit results
[Wed Nov 30 19:44:42 2011] Spatial fit model total counts = 9645.030000, observed total counts = 9670.000000
[Wed Nov 30 19:44:42 2011] Offset between fit and detection position for source 4 = 4.466503 pixels
[Wed Nov 30 19:44:42 2011] 9377.660000 total counts/ 7167.290000 bgd. counts: snr = 26.108835
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 4.466503 pixels
  Position = (278.3, 306.9) = 12 29 10.92 2 5 22.0
  Extent = 22.7 (22.5-45.4)" x 5.2 (4.8-5.6)", rotation angle = 64 (63-65) degrees
  Source counts = 2210.4 +/- 96.8
  Background counts = 7167.3
  Rate = 0.06 +/- 0.003
[Wed Nov 30 19:44:42 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 19:44:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 19:44:42 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 19:44:42 2011] Source does appear to be extended
[Wed Nov 30 19:44:42 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 4.02
[Wed Nov 30 19:44:42 2011] Source is asymmetric
[Wed Nov 30 19:44:42 2011] Source is confused with source 1
[Wed Nov 30 19:44:42 2011] Source is confused with source 2
[Wed Nov 30 19:44:56 2011] Counts = 2210.370000, rescaling region sizes by 2.000000
[Wed Nov 30 19:44:56 2011] XMMSAS src. selection expression = ellipse(24164.594200, 26655.120000, 2726.256078, 629.166018, 64.059000, X, Y)
[Wed Nov 30 19:44:56 2011] Writing source region out to fullrun_pn_xmm0414190701_pi300-10000_pass1_cl_src4_src.reg
[Wed Nov 30 19:44:56 2011] Extracting stamp from image fullrun_pn_xmm0414190701_pi300-10000_cl_sm2.00.img.gz, (122, 150) - (435, 464)
[Wed Nov 30 19:44:56 2011] XMMSAS bgd. selection expression = annulus(24164.594200, 26655.120000, 9087.520261, 18175.040523, X, Y) && !ellipse(23747.859200, 27568.063200, 640.328018, 640.328018, 0.000000, X, Y) && !ellipse(23848.078000, 27400.278000, 1169.096034, 648.409619, 90.000000, X, Y) && !ellipse(22377.020000, 26847.202600, 1242.072036, 1242.072036, 0.000000, X, Y) && !ellipse(25434.337700, 23977.984200, 1822.080052, 1780.214451, 42.521600, X, Y)
[Wed Nov 30 19:44:56 2011] Writing fullrun_pn_xmm0414190701_pi300-10000_pass1_cl_src4.gif
[Wed Nov 30 20:10:19 2011] Mean detx,y = (590.73, 2490.42) 
[Wed Nov 30 20:10:31 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov 30 20:15:27 2011] Binned source spectrum to 10 counts/bin
[Wed Nov 30 20:15:27 2011] Setting source spectrum file to fullrun_pn_xmm0414190701_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Nov 30 20:15:27 2011] Setting bgd. spectrum file to fullrun_pn_xmm0414190701_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Nov 30 22:34:52 2011] Updating aperture counts using extracted products
[Wed Nov 30 22:34:52 2011] Error reading totcts from fullrun_pn_xmm0414190701_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Nov 30 22:34:52 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 22:34:52 2011] Using photon index=1.80, rate=0.0615, arf fullrun_pn_xmm0414190701_pi300-10000_pass1_cl_src4.arf
[Wed Nov 30 22:34:52 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 22:34:52 2011] Updating source flux to 2.4e-13
[Wed Nov 30 22:37:00 2011] Flag b found in src. 4 procflags, skipping spectral fitting
[Wed Nov 30 22:37:00 2011] Flag p found in src. 4 procflags, skipping spectral fitting
[Wed Nov 30 22:37:00 2011] Flag c found in src. 4 procflags, skipping spectral fitting