[Wed Nov 30 07:48:37 2011] Detection parameters:
  Position = (263.2, 308.9) = 12 29 15.32 2 5 30.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 136.6 +/- 23.9
  Background counts = 200.4
  Rate = 0.006 +/- 0.001

[Wed Nov 30 07:48:37 2011] Off-axis axis estimate = 2.67'
[Wed Nov 30 08:05:37 2011] Using EEF radius (= 7.76 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 08:05:37 2011] Initial guess for spatial extent in simple fitting = 7.76"
[Wed Nov 30 08:05:37 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.766
[Wed Nov 30 08:05:37 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.76"
[Wed Nov 30 15:54:31 2011] fullrun_pn_xmm0414190701_pi300-10000_cl_pass0_src3.ximg exists
[Wed Nov 30 15:54:31 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0414190701_pi300-10000_cl_pass0_src3.csv
[Wed Nov 30 15:54:31 2011] fullrun_pn_xmm0414190701_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Nov 30 15:54:31 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0414190701_pi300-10000_cl_pass0_src3.csv
[Wed Nov 30 15:54:31 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0414190701_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0414190701_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 15:54:31 2011] fullrun_pn_xmm0414190701_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Nov 30 15:54:31 2011] fullrun_pn_xmm0414190701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Nov 30 15:54:31 2011] Fit fullrun_pn_xmm0414190701_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Nov 30 17:40:16 2011] Spatial fit model total counts = 1973.690000, observed total counts = 2000.000000
[Wed Nov 30 17:40:16 2011] Offset between fit and detection position for source 3 = 5.392581 pixels
[Wed Nov 30 17:40:16 2011] 2048.170000 total counts/ 1598.000000 bgd. counts: snr = 11.261291
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 5.392581 pixels
  Position = (257.8, 309.1) = 12 29 16.88 2 5 31.6
  Extent = 15.5 (15.4-31.1)", rotation angle = 0
  Source counts = 450.2 +/- 45.3
  Background counts = 1598.0
  Rate = 0.01 +/- 0.001
[Wed Nov 30 17:40:16 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 17:40:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 17:40:16 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 17:40:16 2011] Source does appear to be extended
[Wed Nov 30 17:40:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 17:40:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Nov 30 17:40:38 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Nov 30 17:40:38 2011] Initial guess for spatial extent in simple fitting = 15.53"
[Wed Nov 30 17:40:38 2011] source mask rpix=3.6, npix_max = 66, mask sum = 63, frac = 0.951
[Wed Nov 30 17:40:38 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 15.53"
[Wed Nov 30 18:26:38 2011] fullrun_pn_xmm0414190701_pi300-10000_cl_pass1_src3.ximg exists
[Wed Nov 30 18:26:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414190701_pi300-10000_cl_pass1_src3.csv
[Wed Nov 30 18:26:38 2011] fullrun_pn_xmm0414190701_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Nov 30 18:26:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414190701_pi300-10000_cl_pass1_src3.csv
[Wed Nov 30 18:26:38 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0414190701_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0414190701_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 18:26:38 2011] fullrun_pn_xmm0414190701_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Nov 30 18:26:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414190701_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed Nov 30 18:26:38 2011] fullrun_pn_xmm0414190701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Nov 30 18:26:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414190701_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed Nov 30 18:26:38 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0414190701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0414190701_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 19:44:42 2011] Warning, spatial fit 3 centroid is now closest to src. 2
[Wed Nov 30 19:44:42 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 19:44:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 19:44:42 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 19:44:42 2011] Source does appear to be extended
[Wed Nov 30 19:44:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 19:44:56 2011] XMMSAS src. selection expression = ellipse(22377.020000, 26847.202600, 931.554027, 931.554027, 0.000000, X, Y)
[Wed Nov 30 19:44:56 2011] Writing source region out to fullrun_pn_xmm0414190701_pi300-10000_pass1_cl_src3_src.reg
[Wed Nov 30 19:44:56 2011] Extracting stamp from image fullrun_pn_xmm0414190701_pi300-10000_cl_sm2.00.img.gz, (204, 256) - (311, 363)
[Wed Nov 30 19:44:56 2011] XMMSAS bgd. selection expression = annulus(22377.020000, 26847.202600, 1552.590045, 3105.180089, X, Y) && !ellipse(23747.859200, 27568.063200, 640.328018, 640.328018, 0.000000, X, Y) && !ellipse(23848.078000, 27400.278000, 1169.096034, 648.409619, 90.000000, X, Y) && !ellipse(24164.594200, 26655.120000, 1817.504052, 419.444012, 64.059000, X, Y) && !ellipse(25434.337700, 23977.984200, 1822.080052, 1780.214451, 42.521600, X, Y)
[Wed Nov 30 19:44:56 2011] Writing fullrun_pn_xmm0414190701_pi300-10000_pass1_cl_src3.gif
[Wed Nov 30 20:05:41 2011] Mean detx,y = (1642.82, 3569.14) 
[Wed Nov 30 20:06:01 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov 30 20:06:39 2011] Binned source spectrum to 10 counts/bin
[Wed Nov 30 20:06:39 2011] Setting source spectrum file to fullrun_pn_xmm0414190701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Nov 30 20:06:39 2011] Setting bgd. spectrum file to fullrun_pn_xmm0414190701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Nov 30 22:34:52 2011] Updating aperture counts using extracted products
[Wed Nov 30 22:34:52 2011] Error reading totcts from fullrun_pn_xmm0414190701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Nov 30 22:34:52 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 22:34:52 2011] Using photon index=1.80, rate=0.0125, arf fullrun_pn_xmm0414190701_pi300-10000_pass1_cl_src3.arf
[Wed Nov 30 22:34:52 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 22:34:52 2011] Updating source flux to 4.4e-14