[Wed Nov 30 07:49:43 2011] Detection parameters:
  Position = (196.1, 191.0) = 12 29 34.77 1 56 57.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 216.1 +/- 18.7
  Background counts = 15.7
  Rate = 0.01 +/- 0.001

[Wed Nov 30 07:49:43 2011] Off-axis axis estimate = 10.76'
[Wed Nov 30 16:42:01 2011] Using EEF radius (= 11.81 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 16:42:01 2011] Initial guess for spatial extent in simple fitting = 11.81"
[Wed Nov 30 16:42:01 2011] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.871
[Wed Nov 30 16:42:01 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 11.81"
[Wed Nov 30 17:40:12 2011] fullrun_mos2_xmm0414190701_pi300-10000_cl_pass0_src6.ximg exists
[Wed Nov 30 17:40:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414190701_pi300-10000_cl_pass0_src6.csv
[Wed Nov 30 17:40:12 2011] fullrun_mos2_xmm0414190701_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed Nov 30 17:40:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414190701_pi300-10000_cl_pass0_src6.csv
[Wed Nov 30 17:40:12 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0414190701_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0414190701_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 17:40:13 2011] fullrun_mos2_xmm0414190701_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed Nov 30 17:40:13 2011] fullrun_mos2_xmm0414190701_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Nov 30 17:40:13 2011] Fit fullrun_mos2_xmm0414190701_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Wed Nov 30 17:40:29 2011] Warning, spatial fit 6 centroid is now closest to src. 21
[Wed Nov 30 17:40:29 2011] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 10.709980 pixels away
[Wed Nov 30 17:40:29 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 17:40:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 17:40:29 2011] Assessing source extent using major
[Wed Nov 30 17:40:29 2011] Source does appear to be extended
[Wed Nov 30 17:40:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 18:40:45 2011] Using EEF radius (= 11.81 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 18:40:45 2011] Initial guess for spatial extent in simple fitting = 11.81"
[Wed Nov 30 18:40:45 2011] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.871
[Wed Nov 30 18:40:45 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 11.81"
[Wed Nov 30 19:44:38 2011] fullrun_mos2_xmm0414190701_pi300-10000_cl_pass1_src6.ximg exists
[Wed Nov 30 19:44:38 2011] fullrun_mos2_xmm0414190701_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed Nov 30 19:44:38 2011] Fit fullrun_mos2_xmm0414190701_pi300-10000_cl_pass1_src6 appears to have run properly
[Wed Nov 30 19:44:38 2011] fullrun_mos2_xmm0414190701_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed Nov 30 19:44:38 2011] fullrun_mos2_xmm0414190701_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Nov 30 19:44:38 2011] Fit fullrun_mos2_xmm0414190701_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Wed Nov 30 19:44:48 2011] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 15.831765 pixels away
[Wed Nov 30 19:44:48 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 19:44:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 19:44:48 2011] Assessing source extent using major
[Wed Nov 30 19:44:48 2011] Source does appear to be extended
[Wed Nov 30 19:44:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 22:00:28 2011] XMMSAS src. selection expression = ellipse(17013.299713, 16565.665756, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Nov 30 22:00:28 2011] Writing source region out to fullrun_mos2_xmm0414190701_pi300-10000_pass1_cl_src7_src.reg
[Wed Nov 30 22:00:28 2011] Extracting stamp from image fullrun_mos2_xmm0414190701_pi300-10000_cl_sm2.00.img.gz, (159, 153) - (234, 228)
[Wed Nov 30 22:00:28 2011] XMMSAS bgd. selection expression = annulus(17013.299713, 16565.665756, 1087.500000, 2175.000000, X, Y) && !ellipse(14679.955093, 14729.551041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18392.182400, 10306.222000, 4388.016126, 2067.224059, 63.657400, X, Y)
[Wed Nov 30 22:00:28 2011] Writing fullrun_mos2_xmm0414190701_pi300-10000_pass1_cl_src7.gif
[Wed Nov 30 22:09:02 2011] Mean detx,y = (-10811.68, 3162.90) 
[Wed Nov 30 22:09:04 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov 30 22:09:23 2011] Binned source spectrum to 10 counts/bin
[Wed Nov 30 22:09:23 2011] Setting source spectrum file to fullrun_mos2_xmm0414190701_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Nov 30 22:09:23 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0414190701_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed Nov 30 22:25:42 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Nov 30 22:25:42 2011] rmf not generated due to insufficient counts
[Wed Nov 30 22:34:53 2011] Updating aperture counts using extracted products
[Wed Nov 30 22:34:54 2011] Error reading totcts from fullrun_mos2_xmm0414190701_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Nov 30 22:34:54 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 22:34:54 2011] Using photon index=1.80, rate=0.0113, arf fullrun_mos2_xmm0414190701_pi300-10000_pass1_cl_src7.arf
[Wed Nov 30 22:34:54 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 22:34:54 2011] Updating source flux to 2.1e-13
[Wed Nov 30 22:35:27 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting