[Wed Nov 30 07:49:16 2011] Detection parameters:
  Position = (394.4, 196.1) = 12 28 37.23 1 57 19.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 397.7 +/- 24.6
  Background counts = 15.8
  Rate = 0.01 +/- 0.0007

[Wed Nov 30 07:49:17 2011] Off-axis axis estimate = 10.17'
[Wed Nov 30 15:54:32 2011] Using EEF radius (= 11.51 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 15:54:32 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Nov 30 15:54:32 2011] Initial guess for spatial extent in simple fitting = 11.51"
[Wed Nov 30 15:54:32 2011] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.060
[Wed Nov 30 15:54:32 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 11.51"
[Wed Nov 30 16:42:01 2011] fullrun_mos1_xmm0414190701_pi300-10000_cl_pass0_src2.ximg exists
[Wed Nov 30 16:42:01 2011] fullrun_mos1_xmm0414190701_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Nov 30 16:42:01 2011] Fit fullrun_mos1_xmm0414190701_pi300-10000_cl_pass0_src2 appears to have run properly
[Wed Nov 30 16:42:01 2011] fullrun_mos1_xmm0414190701_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Nov 30 16:42:01 2011] fullrun_mos1_xmm0414190701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Nov 30 16:42:01 2011] Fit fullrun_mos1_xmm0414190701_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Nov 30 17:40:22 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.338543 pixels away
[Wed Nov 30 17:40:22 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 17:40:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 17:40:22 2011] Assessing source extent using major
[Wed Nov 30 17:40:22 2011] Source does appear to be extended
[Wed Nov 30 17:40:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 18:26:38 2011] Using EEF radius (= 11.51 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 18:26:38 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Nov 30 18:26:38 2011] Initial guess for spatial extent in simple fitting = 11.51"
[Wed Nov 30 18:26:38 2011] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.060
[Wed Nov 30 18:26:38 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 11.51"
[Wed Nov 30 18:40:45 2011] fullrun_mos1_xmm0414190701_pi300-10000_cl_pass1_src2.ximg exists
[Wed Nov 30 18:40:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414190701_pi300-10000_cl_pass1_src2.csv
[Wed Nov 30 18:40:45 2011] fullrun_mos1_xmm0414190701_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Nov 30 18:40:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414190701_pi300-10000_cl_pass1_src2.csv
[Wed Nov 30 18:40:45 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0414190701_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0414190701_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 18:40:45 2011] fullrun_mos1_xmm0414190701_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Nov 30 18:40:45 2011] fullrun_mos1_xmm0414190701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Nov 30 18:40:45 2011] Fit fullrun_mos1_xmm0414190701_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Nov 30 19:44:45 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.338543 pixels away
[Wed Nov 30 19:44:45 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 19:44:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 19:44:45 2011] Assessing source extent using major
[Wed Nov 30 19:44:45 2011] Source does appear to be extended
[Wed Nov 30 19:44:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 20:40:15 2011] XMMSAS src. selection expression = ellipse(34266.362427, 17012.298767, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Nov 30 20:40:15 2011] Writing source region out to fullrun_mos1_xmm0414190701_pi300-10000_pass1_cl_src1_src.reg
[Wed Nov 30 20:40:15 2011] Extracting stamp from image fullrun_mos1_xmm0414190701_pi300-10000_cl_sm2.00.img.gz, (357, 159) - (432, 234)
[Wed Nov 30 20:40:15 2011] XMMSAS bgd. selection expression = annulus(34266.362427, 17012.298767, 1087.500000, 2175.000000, X, Y)
[Wed Nov 30 20:40:15 2011] Writing fullrun_mos1_xmm0414190701_pi300-10000_pass1_cl_src1.gif
[Wed Nov 30 20:46:24 2011] Mean detx,y = (10170.92, -5194.81) 
[Wed Nov 30 20:46:26 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov 30 20:46:55 2011] Binned source spectrum to 10 counts/bin
[Wed Nov 30 20:46:55 2011] Setting source spectrum file to fullrun_mos1_xmm0414190701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Nov 30 20:46:55 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0414190701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Nov 30 21:56:09 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Nov 30 21:56:09 2011] rmf not generated due to insufficient counts
[Wed Nov 30 22:34:53 2011] Updating aperture counts using extracted products
[Wed Nov 30 22:34:53 2011] Error reading totcts from fullrun_mos1_xmm0414190701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Nov 30 22:34:53 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 22:34:53 2011] Using photon index=1.80, rate=0.011, arf fullrun_mos1_xmm0414190701_pi300-10000_pass1_cl_src1.arf
[Wed Nov 30 22:34:53 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 22:34:53 2011] Updating source flux to 2.2e-13
[Wed Nov 30 22:34:55 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting