[Mon Aug 20 03:10:20 2012] Detection parameters:
  Position = (273.0, 317.7) = 12 29 12.37 2 6 12.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1424.2 +/- 51.5
  Background counts = 183.6
  Rate = 0.08 +/- 0.003

[Mon Aug 20 03:10:21 2012] Off-axis axis estimate = 2.31'
[Mon Aug 20 03:23:45 2012] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 03:23:45 2012] Initial guess for spatial extent in simple fitting = 7.58"
[Mon Aug 20 03:23:45 2012] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.993
[Mon Aug 20 03:23:45 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.58"
[Mon Aug 20 15:24:47 2012] fullrun_pn_xmm0414190601_pi300-10000_cl_pass0_src1.ximg exists
[Mon Aug 20 15:24:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414190601_pi300-10000_cl_pass0_src1.csv
[Mon Aug 20 15:24:47 2012] fullrun_pn_xmm0414190601_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Aug 20 15:24:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414190601_pi300-10000_cl_pass0_src1.csv
[Mon Aug 20 15:24:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0414190601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0414190601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 15:24:47 2012] fullrun_pn_xmm0414190601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Aug 20 15:24:47 2012] fullrun_pn_xmm0414190601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Aug 20 15:24:47 2012] Fit fullrun_pn_xmm0414190601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Aug 20 20:10:40 2012] Spatial fit model total counts = 4479.780000, observed total counts = 4669.000000
[Mon Aug 20 20:10:40 2012] Offset between fit and detection position for source 1 = 0.214304 pixels
[Mon Aug 20 20:10:40 2012] 4283.700000 total counts/ 2546.940000 bgd. counts: snr = 34.413627
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.214304 pixels
  Position = (273.1, 317.5) = 12 29 12.35 2 6 9.6
  Extent = 8.7 (8.1-9.4)", rotation angle = 0
  Source counts = 1736.8 +/- 65.4
  Background counts = 2546.9
  Rate = 0.06 +/- 0.002
[Mon Aug 20 20:10:40 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 20:10:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 20:10:40 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 20:10:40 2012] Source does appear to be extended
[Mon Aug 20 20:10:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 20:10:40 2012] Source is confused with source 3
[Mon Aug 20 20:10:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 20 20:10:58 2012] Initial guess for spatial extent in simple fitting = 8.73"
[Mon Aug 20 20:10:58 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.994
[Mon Aug 20 20:10:58 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.73"
[Tue Aug 21 01:04:46 2012] fullrun_pn_xmm0414190601_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug 21 01:04:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414190601_pi300-10000_cl_pass1_src1.csv
[Tue Aug 21 01:04:46 2012] fullrun_pn_xmm0414190601_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug 21 01:04:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414190601_pi300-10000_cl_pass1_src1.csv
[Tue Aug 21 01:04:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0414190601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0414190601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 01:04:46 2012] fullrun_pn_xmm0414190601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug 21 01:04:46 2012] fullrun_pn_xmm0414190601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug 21 01:04:46 2012] Fit fullrun_pn_xmm0414190601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Aug 21 04:01:08 2012] Spatial fit model total counts = 4470.850000, observed total counts = 4669.000000
[Tue Aug 21 04:01:08 2012] Offset between fit and detection position for source 1 = 0.030602 pixels
[Tue Aug 21 04:01:08 2012] 4054.580000 total counts/ 2224.040000 bgd. counts: snr = 38.815745
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.030602 pixels
  Position = (273.1, 317.5) = 12 29 12.34 2 6 9.7
  Extent = 8.9 (8.3-9.7)", rotation angle = 0
  Source counts = 1830.5 +/- 63.7
  Background counts = 2224.0
  Rate = 0.06 +/- 0.002
[Tue Aug 21 04:01:08 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 04:01:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 04:01:08 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 04:01:08 2012] Source does appear to be extended
[Tue Aug 21 04:01:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 04:01:21 2012] Counts = 1830.540000, rescaling region sizes by 2.000000
[Tue Aug 21 04:01:21 2012] XMMSAS src. selection expression = ellipse(23712.294820, 27572.528000, 1072.184431, 1072.184431, 0.000000, X, Y)
[Tue Aug 21 04:01:21 2012] Writing source region out to fullrun_pn_xmm0414190601_pi300-10000_pass1_cl_src1_src.reg
[Tue Aug 21 04:01:21 2012] Extracting stamp from image fullrun_pn_xmm0414190601_pi300-10000_cl_sm2.00.img.gz, (211, 256) - (335, 379)
[Tue Aug 21 04:01:21 2012] XMMSAS bgd. selection expression = annulus(23712.294820, 27572.528000, 3573.948103, 7147.896206, X, Y) && !ellipse(24263.510000, 26699.510000, 614.075218, 360.897610, 325.524900, X, Y) && !ellipse(24381.548800, 25884.462000, 1137.488033, 1137.488033, 0.000000, X, Y) && !ellipse(24861.116000, 23749.280000, 3568.512103, 3568.512103, 0.000000, X, Y) && !ellipse(25354.752000, 23933.161200, 1826.570453, 1669.008048, 79.580700, X, Y)
[Tue Aug 21 04:01:21 2012] Writing fullrun_pn_xmm0414190601_pi300-10000_pass1_cl_src1.gif
[Tue Aug 21 04:04:15 2012] Mean detx,y = (291.05, 3494.37) 
[Tue Aug 21 04:04:26 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 04:05:21 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 04:05:22 2012] Setting source spectrum file to fullrun_pn_xmm0414190601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 21 04:05:22 2012] Setting bgd. spectrum file to fullrun_pn_xmm0414190601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Aug 21 13:12:25 2012] Updating aperture counts using extracted products
[Tue Aug 21 13:12:25 2012] Error reading totcts from fullrun_pn_xmm0414190601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 21 13:12:26 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 13:12:26 2012] Using photon index=1.80, rate=0.0582, arf fullrun_pn_xmm0414190601_pi300-10000_pass1_cl_src1.arf
[Tue Aug 21 13:12:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 13:12:26 2012] Updating source flux to 2.1e-13
[Tue Aug 21 13:13:37 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Tue Aug 21 13:14:50 2012] Reading fit data from xmm0414190601/analysis//spectral/fullrun_pn_xmm0414190601_pi300-10000_pass1_cl_src1_pl.csv
[Tue Aug 21 13:14:50 2012] Spectral fit parameter nH value = 1.50141e+12
[Tue Aug 21 13:14:50 2012] Spectral fit parameter PhoIndex value = 1.64627
[Tue Aug 21 13:14:50 2012] Failed to get F(0.3-8.0) from xmm0414190601/analysis//spectral/fullrun_pn_xmm0414190601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Aug 21 13:14:50 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 13:14:50 2012] Using Nh = 1.5e+12, photon index=1.65, rate=0.0582, arf fullrun_pn_xmm0414190601_pi300-10000_pass1_cl_src1.arf
[Tue Aug 21 13:14:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 13:14:50 2012] Updating source flux to 2.3e-13