[Mon Aug 20 03:11:04 2012] Detection parameters:
  Position = (292.0, 275.8) = 12 29 6.87 2 3 8.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 492166.5 +/- 734.2
  Background counts = 27.5
  Rate = 2e+01 +/- 0.02

[Mon Aug 20 03:11:05 2012] Off-axis axis estimate = 1.71'
[Mon Aug 20 19:27:38 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 19:27:38 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Mon Aug 20 19:27:38 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Mon Aug 20 19:27:38 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Mon Aug 20 20:10:35 2012] fullrun_mos2_xmm0414190601_pi300-10000_cl_pass0_src1.ximg exists
[Mon Aug 20 20:10:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414190601_pi300-10000_cl_pass0_src1.csv
[Mon Aug 20 20:10:35 2012] fullrun_mos2_xmm0414190601_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Aug 20 20:10:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414190601_pi300-10000_cl_pass0_src1.csv
[Mon Aug 20 20:10:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0414190601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0414190601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 20:10:35 2012] fullrun_mos2_xmm0414190601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Aug 20 20:10:35 2012] fullrun_mos2_xmm0414190601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Aug 20 20:10:35 2012] Fit fullrun_mos2_xmm0414190601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Aug 20 20:10:51 2012] Spatial fit model total counts = 424163.000000, observed total counts = 448453.000000
[Mon Aug 20 20:10:51 2012] Offset between fit and detection position for source 1 = 0.205852 pixels
[Mon Aug 20 20:10:51 2012] 423159.000000 total counts/ 25600.000000 bgd. counts: snr = 2484.743750
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.205852 pixels
  Position = (292.0, 275.6) = 12 29 6.84 2 3 7.7
  Extent = 7.0 (7.0-7.0)", rotation angle = 0
  Source counts = 397559.0 +/- 650.5
  Background counts = 25600.0
  Rate = 1e+01 +/- 0.02
[Mon Aug 20 20:10:51 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 20:10:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 20:10:51 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 20:10:51 2012] Source does appear to be extended
[Mon Aug 20 20:10:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 03:32:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 21 03:32:14 2012] Initial guess for spatial extent in simple fitting = 6.99"
[Tue Aug 21 03:32:14 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.901
[Tue Aug 21 03:32:14 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.99"
[Tue Aug 21 04:01:03 2012] fullrun_mos2_xmm0414190601_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug 21 04:01:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414190601_pi300-10000_cl_pass1_src1.csv
[Tue Aug 21 04:01:03 2012] fullrun_mos2_xmm0414190601_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug 21 04:01:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414190601_pi300-10000_cl_pass1_src1.csv
[Tue Aug 21 04:01:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0414190601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0414190601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 04:01:03 2012] fullrun_mos2_xmm0414190601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug 21 04:01:03 2012] fullrun_mos2_xmm0414190601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug 21 04:01:04 2012] Fit fullrun_mos2_xmm0414190601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Aug 21 04:01:14 2012] Spatial fit model total counts = 424186.000000, observed total counts = 448453.000000
[Tue Aug 21 04:01:14 2012] Offset between fit and detection position for source 1 = 0.000216 pixels
[Tue Aug 21 04:01:14 2012] 423191.000000 total counts/ 25600.000000 bgd. counts: snr = 2484.943750
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000216 pixels
  Position = (292.0, 275.6) = 12 29 6.84 2 3 7.7
  Extent = 7.0 (7.0-7.0)", rotation angle = 0
  Source counts = 397591.0 +/- 650.5
  Background counts = 25600.0
  Rate = 1e+01 +/- 0.02
[Tue Aug 21 04:01:14 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 04:01:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 04:01:14 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 04:01:14 2012] Source does appear to be extended
[Tue Aug 21 04:01:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 11:00:33 2012] Counts = 397591.000000, rescaling region sizes by 3.000000
[Tue Aug 21 11:00:33 2012] XMMSAS src. selection expression = ellipse(25359.719800, 23932.897200, 1257.730236, 1257.730236, 0.000000, X, Y)
[Tue Aug 21 11:00:33 2012] Writing source region out to fullrun_mos2_xmm0414190601_pi300-10000_pass1_cl_src1_src.reg
[Tue Aug 21 11:00:33 2012] Extracting stamp from image fullrun_mos2_xmm0414190601_pi300-10000_cl_sm2.00.img.gz, (220, 203) - (364, 348)
[Tue Aug 21 11:00:33 2012] XMMSAS bgd. selection expression = annulus(25359.719800, 23932.897200, 6288.651181, 12577.302362, X, Y) && !ellipse(24464.012848, 24132.075775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24501.023956, 23767.805756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13140.310242, 13007.894638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14617.744200, 14666.261200, 605.339217, 278.599208, 19.969569, X, Y) && !ellipse(12538.324829, 35247.815247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34232.340881, 16981.003937, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 21 11:00:33 2012] Writing fullrun_mos2_xmm0414190601_pi300-10000_pass1_cl_src1.gif
[Tue Aug 21 11:01:08 2012] Mean detx,y = (-95.66, -38.35) 
[Tue Aug 21 11:01:14 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 11:06:59 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 11:07:00 2012] Setting source spectrum file to fullrun_mos2_xmm0414190601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 21 11:07:00 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0414190601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Aug 21 13:12:27 2012] Updating aperture counts using extracted products
[Tue Aug 21 13:12:27 2012] Error reading totcts from fullrun_mos2_xmm0414190601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 21 13:12:27 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 13:12:27 2012] Using photon index=1.80, rate=12.6, arf fullrun_mos2_xmm0414190601_pi300-10000_pass1_cl_src1.arf
[Tue Aug 21 13:12:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 13:12:27 2012] Updating source flux to 1.3e-10
[Tue Aug 21 13:13:37 2012] Reading fit data from xmm0414190601/analysis//spectral/fullrun_mos2_xmm0414190601_pi300-10000_pass1_cl_src1_pl.csv
[Tue Aug 21 13:13:37 2012] Spectral fit parameter nH value = 131972000000.0
[Tue Aug 21 13:13:37 2012] Spectral fit parameter PhoIndex value = 1.62328
[Tue Aug 21 13:13:37 2012] Failed to get F(0.3-8.0) from xmm0414190601/analysis//spectral/fullrun_mos2_xmm0414190601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Aug 21 13:13:37 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 13:13:37 2012] Using Nh = 1.3e+11, photon index=1.62, rate=12.6, arf fullrun_mos2_xmm0414190601_pi300-10000_pass1_cl_src1.arf
[Tue Aug 21 13:13:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 13:13:37 2012] Updating source flux to 1.4e-10