[Mon Aug 20 03:10:41 2012] Detection parameters:
  Position = (424.1, 161.4) = 12 28 28.52 1 54 50.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.7 +/- 9.3
  Background counts = 12.2
  Rate = 0.001 +/- 0.0003

[Mon Aug 20 03:10:41 2012] Off-axis axis estimate = 13.48'
[Mon Aug 20 15:24:47 2012] Using EEF radius (= 13.17 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 15:24:47 2012] Initial guess for spatial extent in simple fitting = 13.17"
[Mon Aug 20 15:24:47 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.984
[Mon Aug 20 15:24:47 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 13.17"
[Mon Aug 20 19:27:38 2012] fullrun_mos1_xmm0414190601_pi300-10000_cl_pass0_src13.ximg exists
[Mon Aug 20 19:27:38 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0414190601_pi300-10000_cl_pass0_src13.csv
[Mon Aug 20 19:27:38 2012] fullrun_mos1_xmm0414190601_pi300-10000_cl_pass0_src13_1.ximg exists
[Mon Aug 20 19:27:38 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0414190601_pi300-10000_cl_pass0_src13.csv
[Mon Aug 20 19:27:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0414190601_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0414190601_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 19:27:38 2012] fullrun_mos1_xmm0414190601_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Mon Aug 20 19:27:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414190601_pi300-10000_cl_pass0_tfrozen_src13.csv
[Mon Aug 20 19:27:38 2012] fullrun_mos1_xmm0414190601_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Aug 20 19:27:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414190601_pi300-10000_cl_pass0_tfrozen_src13.csv
[Mon Aug 20 19:27:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0414190601_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0414190601_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 20:10:44 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 15.936351 pixels away
[Mon Aug 20 20:10:44 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 20:10:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 20:10:44 2012] Assessing source extent using major
[Mon Aug 20 20:10:44 2012] Source does appear to be extended
[Mon Aug 20 20:10:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 20:10:44 2012] Deleting source due to low Poisson probability 0.7