[Thu Dec 22 03:11:51 2011] Detection parameters:
  Position = (262.7, 308.2) = 12 29 15.51 2 5 30.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 141.8 +/- 27.6
  Background counts = 293.2
  Rate = 0.006 +/- 0.001

[Thu Dec 22 03:11:51 2011] Off-axis axis estimate = 2.69'
[Thu Dec 22 03:40:52 2011] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 03:40:52 2011] Initial guess for spatial extent in simple fitting = 7.77"
[Thu Dec 22 03:40:52 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.956
[Thu Dec 22 03:40:52 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.77"
[Thu Dec 22 04:12:53 2011] fullrun_pn_xmm0414190501_pi300-10000_cl_pass0_src3.ximg exists
[Thu Dec 22 04:12:53 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0414190501_pi300-10000_cl_pass0_src3.csv
[Thu Dec 22 04:12:53 2011] fullrun_pn_xmm0414190501_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Dec 22 04:12:53 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0414190501_pi300-10000_cl_pass0_src3.csv
[Thu Dec 22 04:12:53 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0414190501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0414190501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 04:12:53 2011] fullrun_pn_xmm0414190501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Dec 22 04:12:53 2011] fullrun_pn_xmm0414190501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Dec 22 04:12:53 2011] Fit fullrun_pn_xmm0414190501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Dec 22 19:50:08 2011] Spatial fit model total counts = 3186.510000, observed total counts = 3184.000000
[Thu Dec 22 19:50:08 2011] Offset between fit and detection position for source 3 = 4.998199 pixels
[Thu Dec 22 19:50:08 2011] 3101.247000 total counts/ 2195.190000 bgd. counts: snr = 19.338352
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 4.998199 pixels
  Position = (265.5, 312.3) = 12 29 14.68 2 5 46.3
  Extent = 15.5 (15.5-31.1)", rotation angle = 0
  Source counts = 906.1 +/- 55.7
  Background counts = 2195.2
  Rate = 0.02 +/- 0.001
[Thu Dec 22 19:50:08 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 19:50:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 19:50:08 2011] Assessing source extent using major axis lower bound
[Thu Dec 22 19:50:08 2011] Source does appear to be extended
[Thu Dec 22 19:50:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 19:50:08 2011] Source is confused with source 1
[Thu Dec 22 19:50:27 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec 22 19:50:27 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Dec 22 19:50:27 2011] Initial guess for spatial extent in simple fitting = 15.55"
[Thu Dec 22 19:50:27 2011] source mask rpix=3.6, npix_max = 66, mask sum = 71, frac = 1.069
[Thu Dec 22 19:50:27 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 15.55"
[Thu Dec 22 21:09:11 2011] fullrun_pn_xmm0414190501_pi300-10000_cl_pass1_src2.ximg exists
[Thu Dec 22 21:09:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414190501_pi300-10000_cl_pass1_src2.csv
[Thu Dec 22 21:09:12 2011] fullrun_pn_xmm0414190501_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Dec 22 21:09:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414190501_pi300-10000_cl_pass1_src2.csv
[Thu Dec 22 21:09:12 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0414190501_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0414190501_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 21:09:12 2011] fullrun_pn_xmm0414190501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Dec 22 21:09:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414190501_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Dec 22 21:09:12 2011] fullrun_pn_xmm0414190501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Dec 22 21:09:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414190501_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Dec 22 21:09:12 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0414190501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0414190501_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 00:38:53 2011] Warning, spatial fit 2 centroid is now closest to src. 14
[Fri Dec 23 00:38:53 2011] Source 2 in spatial fitting is no longer close to this source
[Fri Dec 23 00:38:53 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 00:38:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 00:38:53 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 00:38:53 2011] Source does appear to be extended
[Fri Dec 23 00:38:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 00:39:06 2011] XMMSAS src. selection expression = ellipse(23053.128000, 27120.224000, 932.790027, 932.790027, 0.000000, X, Y)
[Fri Dec 23 00:39:06 2011] Writing source region out to fullrun_pn_xmm0414190501_pi300-10000_pass1_cl_src3_src.reg
[Fri Dec 23 00:39:06 2011] Extracting stamp from image fullrun_pn_xmm0414190501_pi300-10000_cl_sm2.00.img.gz, (212, 259) - (319, 366)
[Fri Dec 23 00:39:06 2011] XMMSAS bgd. selection expression = annulus(23053.128000, 27120.224000, 1554.650045, 3109.300089, X, Y) && !ellipse(23731.261600, 27502.492000, 758.415222, 758.415222, 0.000000, X, Y) && !ellipse(25406.065600, 23944.917900, 1763.916051, 1763.916051, 0.000000, X, Y)
[Fri Dec 23 00:39:06 2011] Writing fullrun_pn_xmm0414190501_pi300-10000_pass1_cl_src3.gif
[Fri Dec 23 01:04:55 2011] Mean detx,y = (731.26, 3584.29) 
[Fri Dec 23 01:05:20 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 23 01:06:10 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 23 01:06:11 2011] Setting source spectrum file to fullrun_pn_xmm0414190501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Dec 23 01:06:11 2011] Setting bgd. spectrum file to fullrun_pn_xmm0414190501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Dec 23 07:39:03 2011] Updating aperture counts using extracted products
[Fri Dec 23 07:39:04 2011] Error reading totcts from fullrun_pn_xmm0414190501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Dec 23 07:39:04 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 07:39:04 2011] Using photon index=1.80, rate=0.0223, arf fullrun_pn_xmm0414190501_pi300-10000_pass1_cl_src3.arf
[Fri Dec 23 07:39:04 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 23 07:39:04 2011] Updating source flux to 7.9e-14
[Fri Dec 23 07:40:54 2011] Flag c found in src. 3 procflags, skipping spectral fitting
[Fri Dec 23 07:43:11 2011] xmm0414190501/analysis//spectral/fullrun_pn_xmm0414190501_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete