[Thu Dec 22 03:11:51 2011] Detection parameters:
  Position = (274.3, 315.0) = 12 29 12.13 2 5 58.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2012.1 +/- 62.8
  Background counts = 289.6
  Rate = 0.08 +/- 0.002

[Thu Dec 22 03:11:51 2011] Off-axis axis estimate = 2.12'
[Thu Dec 22 03:40:52 2011] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 03:40:52 2011] Initial guess for spatial extent in simple fitting = 7.49"
[Thu Dec 22 03:40:52 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.013
[Thu Dec 22 03:40:52 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.49"
[Thu Dec 22 04:12:53 2011] fullrun_pn_xmm0414190501_pi300-10000_cl_pass0_src1.ximg exists
[Thu Dec 22 04:12:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414190501_pi300-10000_cl_pass0_src1.csv
[Thu Dec 22 04:12:53 2011] fullrun_pn_xmm0414190501_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Dec 22 04:12:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414190501_pi300-10000_cl_pass0_src1.csv
[Thu Dec 22 04:12:53 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0414190501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0414190501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 04:12:53 2011] fullrun_pn_xmm0414190501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Dec 22 04:12:53 2011] fullrun_pn_xmm0414190501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Dec 22 04:12:53 2011] Fit fullrun_pn_xmm0414190501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Dec 22 19:50:08 2011] Spatial fit model total counts = 7100.160000, observed total counts = 7251.000000
[Thu Dec 22 19:50:08 2011] Offset between fit and detection position for source 1 = 1.922731 pixels
[Thu Dec 22 19:50:08 2011] 6906.710000 total counts/ 4505.760000 bgd. counts: snr = 35.768365
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.922731 pixels
  Position = (273.3, 316.7) = 12 29 12.42 2 6 5.4
  Extent = 9.5 (9.5-9.5)", rotation angle = 0
  Source counts = 2400.9 +/- 83.1
  Background counts = 4505.8
  Rate = 0.06 +/- 0.002
[Thu Dec 22 19:50:08 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 19:50:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 19:50:08 2011] Assessing source extent using major axis lower bound
[Thu Dec 22 19:50:08 2011] Source does appear to be extended
[Thu Dec 22 19:50:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 19:50:08 2011] Source is confused with source 3
[Thu Dec 22 19:50:27 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec 22 19:50:27 2011] Initial guess for spatial extent in simple fitting = 9.48"
[Thu Dec 22 19:50:27 2011] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.871
[Thu Dec 22 19:50:27 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 9.48"
[Thu Dec 22 21:09:11 2011] fullrun_pn_xmm0414190501_pi300-10000_cl_pass1_src1.ximg exists
[Thu Dec 22 21:09:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414190501_pi300-10000_cl_pass1_src1.csv
[Thu Dec 22 21:09:11 2011] fullrun_pn_xmm0414190501_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Dec 22 21:09:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414190501_pi300-10000_cl_pass1_src1.csv
[Thu Dec 22 21:09:11 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0414190501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0414190501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 21:09:12 2011] fullrun_pn_xmm0414190501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Dec 22 21:09:12 2011] fullrun_pn_xmm0414190501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Dec 22 21:09:12 2011] Fit fullrun_pn_xmm0414190501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Dec 23 00:38:53 2011] Warning, spatial fit 1 centroid is now closest to src. 14
[Fri Dec 23 00:38:53 2011] Source 1 in spatial fitting is no longer close to this source
[Fri Dec 23 00:38:53 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 00:38:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 00:38:53 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 00:38:53 2011] Source does appear to be extended
[Fri Dec 23 00:38:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 00:39:06 2011] Counts = 2400.950000, rescaling region sizes by 2.000000
[Fri Dec 23 00:39:06 2011] XMMSAS src. selection expression = ellipse(23731.261600, 27502.492000, 1137.622833, 1137.622833, 0.000000, X, Y)
[Fri Dec 23 00:39:06 2011] Writing source region out to fullrun_pn_xmm0414190501_pi300-10000_pass1_cl_src1_src.reg
[Fri Dec 23 00:39:06 2011] Extracting stamp from image fullrun_pn_xmm0414190501_pi300-10000_cl_sm2.00.img.gz, (208, 251) - (339, 382)
[Fri Dec 23 00:39:06 2011] XMMSAS bgd. selection expression = annulus(23731.261600, 27502.492000, 3792.076109, 7584.152218, X, Y) && !ellipse(23053.128000, 27120.224000, 1243.720036, 1243.720036, 0.000000, X, Y) && !ellipse(25406.065600, 23944.917900, 1763.916051, 1763.916051, 0.000000, X, Y)
[Fri Dec 23 00:39:06 2011] Writing fullrun_pn_xmm0414190501_pi300-10000_pass1_cl_src1.gif
[Fri Dec 23 00:49:25 2011] Mean detx,y = (267.83, 3440.96) 
[Fri Dec 23 00:49:51 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 23 00:52:24 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 23 00:52:25 2011] Setting source spectrum file to fullrun_pn_xmm0414190501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Dec 23 00:52:25 2011] Setting bgd. spectrum file to fullrun_pn_xmm0414190501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Dec 23 07:39:03 2011] Updating aperture counts using extracted products
[Fri Dec 23 07:39:03 2011] Error reading totcts from fullrun_pn_xmm0414190501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Dec 23 07:39:04 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 07:39:04 2011] Using photon index=1.80, rate=0.0592, arf fullrun_pn_xmm0414190501_pi300-10000_pass1_cl_src1.arf
[Fri Dec 23 07:39:04 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 23 07:39:04 2011] Updating source flux to 2.1e-13
[Fri Dec 23 07:40:54 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Fri Dec 23 07:43:11 2011] xmm0414190501/analysis//spectral/fullrun_pn_xmm0414190501_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete