[Thu Dec 22 03:13:16 2011] Detection parameters:
  Position = (195.6, 190.9) = 12 29 34.97 1 56 58.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 220.3 +/- 19.4
  Background counts = 26.0
  Rate = 0.01 +/- 0.0009

[Thu Dec 22 03:13:17 2011] Off-axis axis estimate = 10.79'
[Thu Dec 22 16:40:17 2011] Using EEF radius (= 11.82 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 16:40:17 2011] Initial guess for spatial extent in simple fitting = 11.82"
[Thu Dec 22 16:40:17 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.014
[Thu Dec 22 16:40:17 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 11.82"
[Thu Dec 22 19:50:04 2011] fullrun_mos2_xmm0414190501_pi300-10000_cl_pass0_src6.ximg exists
[Thu Dec 22 19:50:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414190501_pi300-10000_cl_pass0_src6.csv
[Thu Dec 22 19:50:04 2011] fullrun_mos2_xmm0414190501_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Dec 22 19:50:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414190501_pi300-10000_cl_pass0_src6.csv
[Thu Dec 22 19:50:04 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0414190501_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0414190501_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 19:50:04 2011] fullrun_mos2_xmm0414190501_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Dec 22 19:50:04 2011] fullrun_mos2_xmm0414190501_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Dec 22 19:50:04 2011] Fit fullrun_mos2_xmm0414190501_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Thu Dec 22 19:50:19 2011] Warning, spatial fit 6 centroid is now closest to src. 3
[Thu Dec 22 19:50:19 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 19:50:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 19:50:19 2011] Assessing source extent using major
[Thu Dec 22 19:50:19 2011] Source does appear to be extended
[Thu Dec 22 19:50:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 21:23:33 2011] Using EEF radius (= 11.82 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 21:23:33 2011] Initial guess for spatial extent in simple fitting = 11.82"
[Thu Dec 22 21:23:33 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.014
[Thu Dec 22 21:23:33 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 11.82"
[Fri Dec 23 00:38:50 2011] fullrun_mos2_xmm0414190501_pi300-10000_cl_pass1_src6.ximg exists
[Fri Dec 23 00:38:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414190501_pi300-10000_cl_pass1_src6.csv
[Fri Dec 23 00:38:50 2011] fullrun_mos2_xmm0414190501_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Dec 23 00:38:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414190501_pi300-10000_cl_pass1_src6.csv
[Fri Dec 23 00:38:50 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0414190501_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0414190501_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 00:38:50 2011] fullrun_mos2_xmm0414190501_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Dec 23 00:38:50 2011] fullrun_mos2_xmm0414190501_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Dec 23 00:38:50 2011] Fit fullrun_mos2_xmm0414190501_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Dec 23 00:38:58 2011] Source 7 is offset by 7.004969 and -6.738729 pixels which is larger than
2 X fitted extent = 1.328138 x 1.328138, not incorporating fit results
[Fri Dec 23 00:38:58 2011] Warning, spatial fit 6 centroid is now closest to src. 3
[Fri Dec 23 00:38:58 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 00:38:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 00:38:58 2011] Assessing source extent using major
[Fri Dec 23 00:38:58 2011] Source does appear to be extended
[Fri Dec 23 00:38:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 05:13:16 2011] XMMSAS src. selection expression = ellipse(16969.048340, 16556.346603, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Dec 23 05:13:16 2011] Writing source region out to fullrun_mos2_xmm0414190501_pi300-10000_pass1_cl_src7_src.reg
[Fri Dec 23 05:13:16 2011] Extracting stamp from image fullrun_mos2_xmm0414190501_pi300-10000_cl_sm2.00.img.gz, (158, 153) - (233, 228)
[Fri Dec 23 05:13:16 2011] XMMSAS bgd. selection expression = annulus(16969.048340, 16556.346603, 1087.500000, 2175.000000, X, Y) && !ellipse(17291.953003, 17981.760147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14652.010910, 14670.415573, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Dec 23 05:13:16 2011] Writing fullrun_mos2_xmm0414190501_pi300-10000_pass1_cl_src7.gif
[Fri Dec 23 05:39:34 2011] Mean detx,y = (-10816.05, 3189.82) 
[Fri Dec 23 05:39:37 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 23 05:39:54 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 23 05:39:54 2011] Setting source spectrum file to fullrun_mos2_xmm0414190501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Dec 23 05:39:54 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0414190501_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Fri Dec 23 07:30:32 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Dec 23 07:30:32 2011] rmf not generated due to insufficient counts
[Fri Dec 23 07:39:05 2011] Updating aperture counts using extracted products
[Fri Dec 23 07:39:05 2011] Error reading totcts from fullrun_mos2_xmm0414190501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Dec 23 07:39:05 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 07:39:05 2011] Using photon index=1.80, rate=0.0102, arf fullrun_mos2_xmm0414190501_pi300-10000_pass1_cl_src7.arf
[Fri Dec 23 07:39:05 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 23 07:39:05 2011] Updating source flux to 1.9e-13
[Fri Dec 23 07:39:57 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting