[Thu Dec 22 03:13:16 2011] Detection parameters:
  Position = (169.0, 169.2) = 12 29 42.69 1 55 24.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 592.9 +/- 30.4
  Background counts = 24.5
  Rate = 0.01 +/- 0.0007

[Thu Dec 22 03:13:17 2011] Off-axis axis estimate = 13.26'
[Thu Dec 22 16:40:17 2011] Using EEF radius (= 13.06 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 16:40:17 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Dec 22 16:40:17 2011] Initial guess for spatial extent in simple fitting = 13.06"
[Thu Dec 22 16:40:17 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.999
[Thu Dec 22 16:40:17 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 13.06"
[Thu Dec 22 19:50:04 2011] fullrun_mos2_xmm0414190501_pi300-10000_cl_pass0_src5.ximg exists
[Thu Dec 22 19:50:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414190501_pi300-10000_cl_pass0_src5.csv
[Thu Dec 22 19:50:04 2011] fullrun_mos2_xmm0414190501_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Dec 22 19:50:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414190501_pi300-10000_cl_pass0_src5.csv
[Thu Dec 22 19:50:04 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0414190501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0414190501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 19:50:04 2011] fullrun_mos2_xmm0414190501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Dec 22 19:50:04 2011] fullrun_mos2_xmm0414190501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Dec 22 19:50:04 2011] Fit fullrun_mos2_xmm0414190501_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Dec 22 19:50:19 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 16.922054 pixels away
[Thu Dec 22 19:50:19 2011] Source 5 is offset by 4.617390 and 5.828938 pixels which is larger than
2 X fitted extent = 1.606749 x 1.606749, not incorporating fit results
[Thu Dec 22 19:50:19 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 19:50:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 19:50:19 2011] Assessing source extent using major
[Thu Dec 22 19:50:19 2011] Source does appear to be extended
[Thu Dec 22 19:50:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 21:23:33 2011] Using EEF radius (= 13.06 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 21:23:33 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Dec 22 21:23:33 2011] Initial guess for spatial extent in simple fitting = 13.06"
[Thu Dec 22 21:23:33 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.999
[Thu Dec 22 21:23:33 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 13.06"
[Fri Dec 23 00:38:50 2011] fullrun_mos2_xmm0414190501_pi300-10000_cl_pass1_src5.ximg exists
[Fri Dec 23 00:38:50 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0414190501_pi300-10000_cl_pass1_src5.csv
[Fri Dec 23 00:38:50 2011] fullrun_mos2_xmm0414190501_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Dec 23 00:38:50 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0414190501_pi300-10000_cl_pass1_src5.csv
[Fri Dec 23 00:38:50 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0414190501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0414190501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 00:38:50 2011] fullrun_mos2_xmm0414190501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Dec 23 00:38:50 2011] fullrun_mos2_xmm0414190501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Dec 23 00:38:50 2011] Fit fullrun_mos2_xmm0414190501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Dec 23 00:38:58 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 16.922054 pixels away
[Fri Dec 23 00:38:58 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 00:38:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 00:38:58 2011] Assessing source extent using major
[Fri Dec 23 00:38:58 2011] Source does appear to be extended
[Fri Dec 23 00:38:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 05:13:16 2011] XMMSAS src. selection expression = ellipse(14652.010910, 14670.415573, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Dec 23 05:13:16 2011] Writing source region out to fullrun_mos2_xmm0414190501_pi300-10000_pass1_cl_src5_src.reg
[Fri Dec 23 05:13:16 2011] Extracting stamp from image fullrun_mos2_xmm0414190501_pi300-10000_cl_sm2.00.img.gz, (131, 132) - (206, 207)
[Fri Dec 23 05:13:16 2011] XMMSAS bgd. selection expression = annulus(14652.010910, 14670.415573, 1087.500000, 2175.000000, X, Y) && !ellipse(16969.048340, 16556.346603, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Dec 23 05:13:16 2011] Writing fullrun_mos2_xmm0414190501_pi300-10000_pass1_cl_src5.gif
[Fri Dec 23 05:39:02 2011] Mean detx,y = (-13698.06, 3933.73) 
[Fri Dec 23 05:39:05 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 23 05:39:19 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 23 05:39:20 2011] Setting source spectrum file to fullrun_mos2_xmm0414190501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Dec 23 05:39:20 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0414190501_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Dec 23 07:30:26 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Dec 23 07:30:26 2011] rmf not generated due to insufficient counts
[Fri Dec 23 07:39:05 2011] Updating aperture counts using extracted products
[Fri Dec 23 07:39:05 2011] Error reading totcts from fullrun_mos2_xmm0414190501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Dec 23 07:39:05 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 07:39:05 2011] Using photon index=1.80, rate=0.0146, arf fullrun_mos2_xmm0414190501_pi300-10000_pass1_cl_src5.arf
[Fri Dec 23 07:39:05 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 23 07:39:05 2011] Updating source flux to 3.3e-13
[Fri Dec 23 07:39:57 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting