[Thu Dec 22 03:13:16 2011] Detection parameters:
  Position = (292.6, 275.9) = 12 29 6.83 2 3 8.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 581531.2 +/- 820.0
  Background counts = 37.5
  Rate = 2e+01 +/- 0.02

[Thu Dec 22 03:13:17 2011] Off-axis axis estimate = 1.69'
[Thu Dec 22 16:40:17 2011] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 16:40:17 2011] Initial guess for spatial extent in simple fitting = 7.27"
[Thu Dec 22 16:40:17 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.060
[Thu Dec 22 16:40:17 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Thu Dec 22 19:50:04 2011] fullrun_mos2_xmm0414190501_pi300-10000_cl_pass0_src1.ximg exists
[Thu Dec 22 19:50:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414190501_pi300-10000_cl_pass0_src1.csv
[Thu Dec 22 19:50:04 2011] fullrun_mos2_xmm0414190501_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Dec 22 19:50:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414190501_pi300-10000_cl_pass0_src1.csv
[Thu Dec 22 19:50:04 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0414190501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0414190501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 19:50:04 2011] fullrun_mos2_xmm0414190501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Dec 22 19:50:04 2011] fullrun_mos2_xmm0414190501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Dec 22 19:50:04 2011] Fit fullrun_mos2_xmm0414190501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Dec 22 19:50:19 2011] Spatial fit model total counts = 512689.000000, observed total counts = 538283.000000
[Thu Dec 22 19:50:19 2011] Offset between fit and detection position for source 2 = 0.077322 pixels
[Thu Dec 22 19:50:19 2011] 505711.000000 total counts/ 25600.000000 bgd. counts: snr = 3000.693750
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.077322 pixels
  Position = (292.6, 275.9) = 12 29 6.82 2 3 8.0
  Extent = 7.1 (7.1-7.1)", rotation angle = 0
  Source counts = 480111.0 +/- 711.1
  Background counts = 25600.0
  Rate = 1e+01 +/- 0.02
[Thu Dec 22 19:50:19 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 19:50:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 19:50:19 2011] Assessing source extent using major axis lower bound
[Thu Dec 22 19:50:19 2011] Source does appear to be extended
[Thu Dec 22 19:50:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 21:23:33 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec 22 21:23:33 2011] Initial guess for spatial extent in simple fitting = 7.10"
[Thu Dec 22 21:23:33 2011] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.101
[Thu Dec 22 21:23:33 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.10"
[Fri Dec 23 00:38:50 2011] fullrun_mos2_xmm0414190501_pi300-10000_cl_pass1_src1.ximg exists
[Fri Dec 23 00:38:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414190501_pi300-10000_cl_pass1_src1.csv
[Fri Dec 23 00:38:50 2011] fullrun_mos2_xmm0414190501_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Dec 23 00:38:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414190501_pi300-10000_cl_pass1_src1.csv
[Fri Dec 23 00:38:50 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0414190501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0414190501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 00:38:50 2011] fullrun_mos2_xmm0414190501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Dec 23 00:38:50 2011] fullrun_mos2_xmm0414190501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Dec 23 00:38:50 2011] Fit fullrun_mos2_xmm0414190501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Dec 23 00:38:58 2011] Spatial fit model total counts = 513583.000000, observed total counts = 539825.000000
[Fri Dec 23 00:38:58 2011] Offset between fit and detection position for source 2 = 0.008532 pixels
[Fri Dec 23 00:38:58 2011] 507715.000000 total counts/ 25600.000000 bgd. counts: snr = 3013.218750
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.008532 pixels
  Position = (292.6, 275.9) = 12 29 6.81 2 3 8.0
  Extent = 7.1 (7.1-7.2)", rotation angle = 0
  Source counts = 482115.0 +/- 712.5
  Background counts = 25600.0
  Rate = 1e+01 +/- 0.02
[Fri Dec 23 00:38:58 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 00:38:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 00:38:58 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 00:38:58 2011] Source does appear to be extended
[Fri Dec 23 00:38:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 05:13:16 2011] Counts = 482115.000000, rescaling region sizes by 3.000000
[Fri Dec 23 05:13:16 2011] XMMSAS src. selection expression = ellipse(25410.826200, 23953.890600, 1286.568037, 1286.568037, 0.000000, X, Y)
[Fri Dec 23 05:13:16 2011] Writing source region out to fullrun_mos2_xmm0414190501_pi300-10000_pass1_cl_src2_src.reg
[Fri Dec 23 05:13:16 2011] Extracting stamp from image fullrun_mos2_xmm0414190501_pi300-10000_cl_sm2.00.img.gz, (219, 202) - (367, 350)
[Fri Dec 23 05:13:16 2011] XMMSAS bgd. selection expression = annulus(25410.826200, 23953.890600, 6432.840185, 12865.680370, X, Y) && !ellipse(24900.494354, 23433.388885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24542.500824, 23792.186890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17291.953003, 17981.760147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14652.010910, 14670.415573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16969.048340, 16556.346603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34258.364000, 16987.612820, 452.471213, 452.471213, 0.000000, X, Y)
[Fri Dec 23 05:13:16 2011] Writing fullrun_mos2_xmm0414190501_pi300-10000_pass1_cl_src2.gif
[Fri Dec 23 05:14:28 2011] Mean detx,y = (-67.15, -52.45) 
[Fri Dec 23 05:14:40 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 23 05:24:01 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 23 05:24:01 2011] Setting source spectrum file to fullrun_mos2_xmm0414190501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Dec 23 05:24:01 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0414190501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Dec 23 07:39:05 2011] Updating aperture counts using extracted products
[Fri Dec 23 07:39:05 2011] Error reading totcts from fullrun_mos2_xmm0414190501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Dec 23 07:39:05 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 07:39:05 2011] Using photon index=1.80, rate=11.8, arf fullrun_mos2_xmm0414190501_pi300-10000_pass1_cl_src2.arf
[Fri Dec 23 07:39:05 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 23 07:39:05 2011] Updating source flux to 1.2e-10
[Fri Dec 23 07:40:54 2011] Reading fit data from xmm0414190501/analysis//spectral/fullrun_mos2_xmm0414190501_pi300-10000_pass1_cl_src2_pl.csv
[Fri Dec 23 07:40:54 2011] Spectral fit parameter nH value = 1.4279e+14
[Fri Dec 23 07:40:54 2011] Spectral fit parameter PhoIndex value = 1.60244
[Fri Dec 23 07:40:54 2011] Failed to get F(0.3-8.0) from xmm0414190501/analysis//spectral/fullrun_mos2_xmm0414190501_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Dec 23 07:40:54 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 07:40:54 2011] Using Nh = 1.4e+14, photon index=1.60, rate=11.8, arf fullrun_mos2_xmm0414190501_pi300-10000_pass1_cl_src2.arf
[Fri Dec 23 07:40:54 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 23 07:40:54 2011] Updating source flux to 1.3e-10