[Tue Feb 14 10:44:28 2012] Detection parameters:
  Position = (293.2, 275.9) = 12 29 6.78 2 3 8.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 640061.1 +/- 938.2
  Background counts = 24.0
  Rate = 2e+01 +/- 0.03

[Tue Feb 14 10:44:28 2012] Off-axis axis estimate = 1.68'
[Tue Feb 14 11:39:27 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 11:39:27 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Tue Feb 14 11:39:27 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.849
[Tue Feb 14 11:39:27 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Tue Feb 14 13:12:51 2012] fullrun_mos2_xmm0414190401_pi300-10000_cl_pass0_src1.ximg exists
[Tue Feb 14 13:12:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414190401_pi300-10000_cl_pass0_src1.csv
[Tue Feb 14 13:12:51 2012] fullrun_mos2_xmm0414190401_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Feb 14 13:12:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414190401_pi300-10000_cl_pass0_src1.csv
[Tue Feb 14 13:12:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0414190401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0414190401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 13:12:51 2012] fullrun_mos2_xmm0414190401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Feb 14 13:12:51 2012] fullrun_mos2_xmm0414190401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Feb 14 13:12:51 2012] Fit fullrun_mos2_xmm0414190401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Feb 14 13:12:58 2012] Spatial fit model total counts = 559592.000000, observed total counts = 589934.000000
[Tue Feb 14 13:12:58 2012] Offset between fit and detection position for source 1 = 0.156659 pixels
[Tue Feb 14 13:12:58 2012] 558556.000000 total counts/ 25600.000000 bgd. counts: snr = 3330.975000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.156659 pixels
  Position = (293.3, 275.7) = 12 29 6.75 2 3 7.7
  Extent = 7.5 (7.5-7.5)", rotation angle = 0
  Source counts = 532956.0 +/- 747.4
  Background counts = 25600.0
  Rate = 1e+01 +/- 0.02
[Tue Feb 14 13:12:58 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 13:12:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 13:12:58 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 13:12:58 2012] Source does appear to be extended
[Tue Feb 14 13:12:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 13:31:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 14 13:31:43 2012] Initial guess for spatial extent in simple fitting = 7.54"
[Tue Feb 14 13:31:43 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.003
[Tue Feb 14 13:31:43 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.54"
[Tue Feb 14 17:39:58 2012] fullrun_mos2_xmm0414190401_pi300-10000_cl_pass1_src1.ximg exists
[Tue Feb 14 17:39:58 2012] fullrun_mos2_xmm0414190401_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Feb 14 17:39:58 2012] Fit fullrun_mos2_xmm0414190401_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Feb 14 17:39:58 2012] fullrun_mos2_xmm0414190401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Feb 14 17:39:58 2012] fullrun_mos2_xmm0414190401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Feb 14 17:39:59 2012] Fit fullrun_mos2_xmm0414190401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Feb 14 17:40:02 2012] Spatial fit model total counts = 559190.000000, observed total counts = 589714.000000
[Tue Feb 14 17:40:02 2012] Offset between fit and detection position for source 1 = 0.000964 pixels
[Tue Feb 14 17:40:02 2012] 558450.000000 total counts/ 25600.000000 bgd. counts: snr = 3330.312500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000964 pixels
  Position = (293.3, 275.7) = 12 29 6.75 2 3 7.7
  Extent = 7.5 (7.5-7.5)", rotation angle = 0
  Source counts = 532850.0 +/- 747.3
  Background counts = 25600.0
  Rate = 1e+01 +/- 0.02
[Tue Feb 14 17:40:02 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 17:40:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 17:40:02 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 17:40:02 2012] Source does appear to be extended
[Tue Feb 14 17:40:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 19:29:09 2012] Counts = 532850.000000, rescaling region sizes by 3.000000
[Tue Feb 14 19:29:09 2012] XMMSAS src. selection expression = ellipse(25467.994800, 23940.292000, 1355.515239, 1355.515239, 0.000000, X, Y)
[Tue Feb 14 19:29:09 2012] Writing source region out to fullrun_mos2_xmm0414190401_pi300-10000_pass1_cl_src1_src.reg
[Tue Feb 14 19:29:09 2012] Extracting stamp from image fullrun_mos2_xmm0414190401_pi300-10000_cl_sm2.00.img.gz, (215, 198) - (371, 354)
[Tue Feb 14 19:29:09 2012] XMMSAS bgd. selection expression = annulus(25467.994800, 23940.292000, 6777.576195, 13555.152390, X, Y) && !ellipse(24592.200317, 23792.853302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17361.796040, 17994.157800, 506.349615, 506.349615, 0.000000, X, Y) && !ellipse(14712.864000, 14672.573000, 410.864012, 410.864012, 0.000000, X, Y) && !ellipse(17040.860245, 16548.489044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34350.248077, 16991.256332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13246.466278, 13014.427338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11450.749161, 29979.018463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18568.926000, 9702.658800, 2009.720267, 2009.720267, 0.000000, X, Y)
[Tue Feb 14 19:29:09 2012] Writing fullrun_mos2_xmm0414190401_pi300-10000_pass1_cl_src1.gif
[Tue Feb 14 19:29:46 2012] Mean detx,y = (-25.40, -23.34) 
[Tue Feb 14 19:29:51 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 14 19:34:15 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 14 19:34:15 2012] Setting source spectrum file to fullrun_mos2_xmm0414190401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Feb 14 19:34:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0414190401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Feb 14 20:33:39 2012] Updating aperture counts using extracted products
[Tue Feb 14 20:33:39 2012] Error reading totcts from fullrun_mos2_xmm0414190401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Feb 14 20:33:39 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 20:33:39 2012] Using photon index=1.80, rate=15, arf fullrun_mos2_xmm0414190401_pi300-10000_pass1_cl_src1.arf
[Tue Feb 14 20:33:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 14 20:33:39 2012] Updating source flux to 1.8e-10
[Tue Feb 14 20:34:54 2012] Reading fit data from xmm0414190401/analysis//spectral/fullrun_mos2_xmm0414190401_pi300-10000_pass1_cl_src1_pl.csv
[Tue Feb 14 20:34:54 2012] Spectral fit parameter nH value = 388801000000.0
[Tue Feb 14 20:34:54 2012] Spectral fit parameter PhoIndex value = 1.67453
[Tue Feb 14 20:34:54 2012] Failed to get F(0.3-8.0) from xmm0414190401/analysis//spectral/fullrun_mos2_xmm0414190401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Feb 14 20:34:54 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 20:34:54 2012] Using Nh = 3.9e+11, photon index=1.67, rate=15, arf fullrun_mos2_xmm0414190401_pi300-10000_pass1_cl_src1.arf
[Tue Feb 14 20:34:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 14 20:34:54 2012] Updating source flux to 1.9e-10