[Tue Feb 14 10:44:04 2012] Detection parameters:
  Position = (293.2, 275.9) = 12 29 6.78 2 3 8.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 651599.0 +/- 922.4
  Background counts = 28.7
  Rate = 2e+01 +/- 0.03

[Tue Feb 14 10:44:04 2012] Off-axis axis estimate = 1.68'
[Tue Feb 14 11:19:35 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 11:19:35 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Tue Feb 14 11:19:35 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.849
[Tue Feb 14 11:19:35 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Tue Feb 14 11:39:27 2012] fullrun_mos1_xmm0414190401_pi300-10000_cl_pass0_src1.ximg exists
[Tue Feb 14 11:39:27 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0414190401_pi300-10000_cl_pass0_src1.csv
[Tue Feb 14 11:39:27 2012] fullrun_mos1_xmm0414190401_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Feb 14 11:39:27 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0414190401_pi300-10000_cl_pass0_src1.csv
[Tue Feb 14 11:39:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0414190401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0414190401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 11:39:27 2012] fullrun_mos1_xmm0414190401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Feb 14 11:39:27 2012] fullrun_mos1_xmm0414190401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Feb 14 11:39:27 2012] Fit fullrun_mos1_xmm0414190401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Feb 14 13:12:55 2012] Spatial fit model total counts = 548513.000000, observed total counts = 586251.000000
[Tue Feb 14 13:12:55 2012] Offset between fit and detection position for source 5 = 0.083963 pixels
[Tue Feb 14 13:12:55 2012] 548112.000000 total counts/ 25600.000000 bgd. counts: snr = 3265.700000
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.083963 pixels
  Position = (293.2, 275.8) = 12 29 6.78 2 3 8.1
  Extent = 7.5 (7.5-7.5)", rotation angle = 0
  Source counts = 522512.0 +/- 740.3
  Background counts = 25600.0
  Rate = 1e+01 +/- 0.02
[Tue Feb 14 13:12:55 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 13:12:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 13:12:55 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 13:12:55 2012] Source does appear to be extended
[Tue Feb 14 13:12:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 13:24:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 14 13:24:30 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Tue Feb 14 13:24:30 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.807
[Tue Feb 14 13:24:30 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.51"
[Tue Feb 14 13:31:43 2012] fullrun_mos1_xmm0414190401_pi300-10000_cl_pass1_src1.ximg exists
[Tue Feb 14 13:31:43 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0414190401_pi300-10000_cl_pass1_src1.csv
[Tue Feb 14 13:31:43 2012] fullrun_mos1_xmm0414190401_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Feb 14 13:31:43 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0414190401_pi300-10000_cl_pass1_src1.csv
[Tue Feb 14 13:31:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0414190401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0414190401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 13:31:43 2012] fullrun_mos1_xmm0414190401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Feb 14 13:31:43 2012] fullrun_mos1_xmm0414190401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Feb 14 13:31:43 2012] Fit fullrun_mos1_xmm0414190401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Feb 14 17:40:01 2012] Spatial fit model total counts = 549095.000000, observed total counts = 586623.000000
[Tue Feb 14 17:40:01 2012] Offset between fit and detection position for source 5 = 0.001227 pixels
[Tue Feb 14 17:40:01 2012] 548679.000000 total counts/ 25600.000000 bgd. counts: snr = 3269.243750
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.001227 pixels
  Position = (293.2, 275.8) = 12 29 6.78 2 3 8.1
  Extent = 7.5 (7.5-7.5)", rotation angle = 0
  Source counts = 523079.0 +/- 740.7
  Background counts = 25600.0
  Rate = 1e+01 +/- 0.02
[Tue Feb 14 17:40:01 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 17:40:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 17:40:01 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 17:40:01 2012] Source does appear to be extended
[Tue Feb 14 17:40:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 18:04:16 2012] Counts = 523079.000000, rescaling region sizes by 3.000000
[Tue Feb 14 18:04:16 2012] XMMSAS src. selection expression = ellipse(25461.013440, 23947.886240, 1353.913239, 1353.913239, 0.000000, X, Y)
[Tue Feb 14 18:04:16 2012] Writing source region out to fullrun_mos1_xmm0414190401_pi300-10000_pass1_cl_src5_src.reg
[Tue Feb 14 18:04:16 2012] Extracting stamp from image fullrun_mos1_xmm0414190401_pi300-10000_cl_sm2.00.img.gz, (215, 198) - (371, 354)
[Tue Feb 14 18:04:16 2012] XMMSAS bgd. selection expression = annulus(25461.013440, 23947.886240, 6769.566195, 13539.132390, X, Y) && !ellipse(14724.199829, 14654.085815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34303.057587, 17002.945099, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb 14 18:04:16 2012] Writing fullrun_mos1_xmm0414190401_pi300-10000_pass1_cl_src5.gif
[Tue Feb 14 18:04:46 2012] Mean detx,y = (175.99, -115.67) 
[Tue Feb 14 18:04:50 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 14 18:09:04 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 14 18:09:05 2012] Setting source spectrum file to fullrun_mos1_xmm0414190401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Feb 14 18:09:05 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0414190401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue Feb 14 20:33:39 2012] Updating aperture counts using extracted products
[Tue Feb 14 20:33:39 2012] Error reading totcts from fullrun_mos1_xmm0414190401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Feb 14 20:33:39 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 20:33:39 2012] Using photon index=1.80, rate=14.7, arf fullrun_mos1_xmm0414190401_pi300-10000_pass1_cl_src5.arf
[Tue Feb 14 20:33:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 14 20:33:39 2012] Updating source flux to 1.6e-10
[Tue Feb 14 20:34:00 2012] Reading fit data from xmm0414190401/analysis//spectral/fullrun_mos1_xmm0414190401_pi300-10000_pass1_cl_src5_pl.csv
[Tue Feb 14 20:34:00 2012] Spectral fit parameter nH value = 1.03256e+13
[Tue Feb 14 20:34:00 2012] Spectral fit parameter PhoIndex value = 1.69362
[Tue Feb 14 20:34:00 2012] Failed to get F(0.3-8.0) from xmm0414190401/analysis//spectral/fullrun_mos1_xmm0414190401_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Tue Feb 14 20:34:00 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 20:34:00 2012] Using Nh = 1e+13, photon index=1.69, rate=14.7, arf fullrun_mos1_xmm0414190401_pi300-10000_pass1_cl_src5.arf
[Tue Feb 14 20:34:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 14 20:34:00 2012] Updating source flux to 1.7e-10