[Tue Feb 14 10:44:03 2012] Detection parameters:
  Position = (394.8, 196.0) = 12 28 37.28 1 57 20.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 246.6 +/- 19.7
  Background counts = 14.7
  Rate = 0.007 +/- 0.0006

[Tue Feb 14 10:44:04 2012] Off-axis axis estimate = 10.20'
[Tue Feb 14 11:19:35 2012] Using EEF radius (= 11.53 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 11:19:35 2012] Initial guess for spatial extent in simple fitting = 11.53"
[Tue Feb 14 11:19:35 2012] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.907
[Tue Feb 14 11:19:35 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 11.53"
[Tue Feb 14 11:39:27 2012] fullrun_mos1_xmm0414190401_pi300-10000_cl_pass0_src4.ximg exists
[Tue Feb 14 11:39:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414190401_pi300-10000_cl_pass0_src4.csv
[Tue Feb 14 11:39:27 2012] fullrun_mos1_xmm0414190401_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Feb 14 11:39:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414190401_pi300-10000_cl_pass0_src4.csv
[Tue Feb 14 11:39:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0414190401_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0414190401_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 11:39:27 2012] fullrun_mos1_xmm0414190401_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Feb 14 11:39:27 2012] fullrun_mos1_xmm0414190401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Feb 14 11:39:27 2012] Fit fullrun_mos1_xmm0414190401_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Tue Feb 14 13:12:55 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.808397 pixels away
[Tue Feb 14 13:12:55 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 13:12:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 13:12:55 2012] Assessing source extent using major
[Tue Feb 14 13:12:55 2012] Source does appear to be extended
[Tue Feb 14 13:12:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 13:24:30 2012] Using EEF radius (= 11.53 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 13:24:30 2012] Initial guess for spatial extent in simple fitting = 11.53"
[Tue Feb 14 13:24:30 2012] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.907
[Tue Feb 14 13:24:30 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 11.53"
[Tue Feb 14 13:31:43 2012] fullrun_mos1_xmm0414190401_pi300-10000_cl_pass1_src4.ximg exists
[Tue Feb 14 13:31:43 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0414190401_pi300-10000_cl_pass1_src4.csv
[Tue Feb 14 13:31:43 2012] fullrun_mos1_xmm0414190401_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue Feb 14 13:31:43 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0414190401_pi300-10000_cl_pass1_src4.csv
[Tue Feb 14 13:31:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0414190401_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0414190401_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 13:31:43 2012] fullrun_mos1_xmm0414190401_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue Feb 14 13:31:43 2012] fullrun_mos1_xmm0414190401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Feb 14 13:31:43 2012] Fit fullrun_mos1_xmm0414190401_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Tue Feb 14 17:40:01 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.009382 pixels away
[Tue Feb 14 17:40:01 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 17:40:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 17:40:01 2012] Assessing source extent using major
[Tue Feb 14 17:40:01 2012] Source does appear to be extended
[Tue Feb 14 17:40:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 18:04:16 2012] XMMSAS src. selection expression = ellipse(34303.057587, 17002.945099, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Feb 14 18:04:16 2012] Writing source region out to fullrun_mos1_xmm0414190401_pi300-10000_pass1_cl_src2_src.reg
[Tue Feb 14 18:04:16 2012] Extracting stamp from image fullrun_mos1_xmm0414190401_pi300-10000_cl_sm2.00.img.gz, (357, 158) - (432, 233)
[Tue Feb 14 18:04:16 2012] XMMSAS bgd. selection expression = annulus(34303.057587, 17002.945099, 1087.500000, 2175.000000, X, Y)
[Tue Feb 14 18:04:16 2012] Writing fullrun_mos1_xmm0414190401_pi300-10000_pass1_cl_src2.gif
[Tue Feb 14 18:09:31 2012] Mean detx,y = (10208.07, -5200.67) 
[Tue Feb 14 18:09:32 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 14 18:09:57 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 14 18:09:57 2012] Setting source spectrum file to fullrun_mos1_xmm0414190401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Feb 14 18:09:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0414190401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Feb 14 19:29:03 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Feb 14 19:29:03 2012] rmf not generated due to insufficient counts
[Tue Feb 14 20:33:39 2012] Updating aperture counts using extracted products
[Tue Feb 14 20:33:39 2012] Error reading totcts from fullrun_mos1_xmm0414190401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Feb 14 20:33:39 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 20:33:39 2012] Using photon index=1.80, rate=0.00694, arf fullrun_mos1_xmm0414190401_pi300-10000_pass1_cl_src2.arf
[Tue Feb 14 20:33:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 14 20:33:39 2012] Updating source flux to 1.6e-13
[Tue Feb 14 20:33:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting