[Mon Jan  2 10:42:15 2012] Detection parameters:
  Position = (321.1, 282.1) = 12 29 1.85 2 0 22.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1162.7 +/- 47.8
  Background counts = 162.8
  Rate = 0.06 +/- 0.002

[Mon Jan  2 10:42:15 2012] Off-axis axis estimate = 2.03'
[Mon Jan  2 10:59:13 2012] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Mon Jan  2 10:59:13 2012] Initial guess for spatial extent in simple fitting = 7.44"
[Mon Jan  2 10:59:13 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.818
[Mon Jan  2 10:59:13 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.44"
[Mon Jan  2 12:41:22 2012] fullrun_pn_xmm0414190301_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jan  2 12:41:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414190301_pi300-10000_cl_pass0_src3.csv
[Mon Jan  2 12:41:22 2012] fullrun_pn_xmm0414190301_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jan  2 12:41:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414190301_pi300-10000_cl_pass0_src3.csv
[Mon Jan  2 12:41:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0414190301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0414190301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan  2 12:41:22 2012] fullrun_pn_xmm0414190301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jan  2 12:41:22 2012] fullrun_pn_xmm0414190301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jan  2 12:41:22 2012] Fit fullrun_pn_xmm0414190301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Jan  2 14:34:54 2012] Spatial fit model total counts = 4724.720000, observed total counts = 4704.000000
[Mon Jan  2 14:34:54 2012] Offset between fit and detection position for source 3 = 2.843833 pixels
[Mon Jan  2 14:34:54 2012] 4826.770000 total counts/ 3103.620000 bgd. counts: snr = 30.930633
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.843833 pixels
  Position = (322.3, 279.5) = 12 29 1.53 2 0 10.9
  Extent = 11.1 (11.1-11.9)", rotation angle = 0
  Source counts = 1723.2 +/- 69.5
  Background counts = 3103.6
  Rate = 0.05 +/- 0.002
[Mon Jan  2 14:34:54 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 14:34:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 14:34:54 2012] Assessing source extent using major axis lower bound
[Mon Jan  2 14:34:54 2012] Source does appear to be extended
[Mon Jan  2 14:34:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 14:34:54 2012] Source is confused with source 2
[Mon Jan  2 14:35:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan  2 14:35:09 2012] Initial guess for spatial extent in simple fitting = 11.11"
[Mon Jan  2 14:35:09 2012] source mask rpix=2.6, npix_max = 37, mask sum = 41, frac = 1.098
[Mon Jan  2 14:35:09 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.11"
[Mon Jan  2 16:04:14 2012] fullrun_pn_xmm0414190301_pi300-10000_cl_pass1_src3.ximg exists
[Mon Jan  2 16:04:14 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0414190301_pi300-10000_cl_pass1_src3.csv
[Mon Jan  2 16:04:14 2012] fullrun_pn_xmm0414190301_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Jan  2 16:04:14 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0414190301_pi300-10000_cl_pass1_src3.csv
[Mon Jan  2 16:04:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0414190301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0414190301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan  2 16:04:14 2012] fullrun_pn_xmm0414190301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Jan  2 16:04:14 2012] fullrun_pn_xmm0414190301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jan  2 16:04:14 2012] Fit fullrun_pn_xmm0414190301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Jan  3 04:00:49 2012] Warning, spatial fit 3 centroid is now closest to src. 3
[Tue Jan  3 04:00:49 2012] Source 3 in spatial fitting is no longer close to this source
[Tue Jan  3 04:00:49 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 04:00:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 04:00:49 2012] Assessing source extent using major axis lower bound
[Tue Jan  3 04:00:49 2012] Source does appear to be extended
[Tue Jan  3 04:00:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan  3 04:01:01 2012] Counts = 1723.150000, rescaling region sizes by 2.000000
[Tue Jan  3 04:01:01 2012] XMMSAS src. selection expression = ellipse(27988.180600, 24264.102000, 1333.704038, 1333.704038, 0.000000, X, Y)
[Tue Jan  3 04:01:01 2012] Writing source region out to fullrun_pn_xmm0414190301_pi300-10000_pass1_cl_src3_src.reg
[Tue Jan  3 04:01:01 2012] Extracting stamp from image fullrun_pn_xmm0414190301_pi300-10000_cl_sm2.00.img.gz, (246, 203) - (399, 356)
[Tue Jan  3 04:01:01 2012] XMMSAS bgd. selection expression = annulus(27988.180600, 24264.102000, 4445.680128, 8891.360256, X, Y) && !ellipse(26412.520480, 27820.714000, 1759.298881, 1759.298881, 0.000000, X, Y) && !ellipse(27710.284000, 25007.738000, 1136.176033, 1136.176033, 0.000000, X, Y)
[Tue Jan  3 04:01:01 2012] Writing fullrun_pn_xmm0414190301_pi300-10000_pass1_cl_src3.gif
[Tue Jan  3 04:23:34 2012] Mean detx,y = (197.04, 3316.41) 
[Tue Jan  3 04:23:55 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan  3 04:25:53 2012] Binned source spectrum to 10 counts/bin
[Tue Jan  3 04:25:53 2012] Setting source spectrum file to fullrun_pn_xmm0414190301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jan  3 04:25:53 2012] Setting bgd. spectrum file to fullrun_pn_xmm0414190301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jan  3 06:35:49 2012] Updating aperture counts using extracted products
[Tue Jan  3 06:35:49 2012] Error reading totcts from fullrun_pn_xmm0414190301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jan  3 06:35:49 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 06:35:49 2012] Using photon index=1.80, rate=0.0538, arf fullrun_pn_xmm0414190301_pi300-10000_pass1_cl_src3.arf
[Tue Jan  3 06:35:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 06:35:49 2012] Updating source flux to 2e-13
[Tue Jan  3 06:37:21 2012] Flag c found in src. 3 procflags, skipping spectral fitting