[Mon Jan  2 10:43:30 2012] Detection parameters:
  Position = (304.3, 320.1) = 12 29 6.72 2 3 8.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 368780.8 +/- 692.4
  Background counts = 23.2
  Rate = 1e+01 +/- 0.02

[Mon Jan  2 10:43:31 2012] Off-axis axis estimate = 1.63'
[Mon Jan  2 13:02:38 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Mon Jan  2 13:02:38 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Mon Jan  2 13:02:38 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.067
[Mon Jan  2 13:02:38 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Mon Jan  2 14:34:51 2012] fullrun_mos2_xmm0414190301_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jan  2 14:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414190301_pi300-10000_cl_pass0_src1.csv
[Mon Jan  2 14:34:51 2012] fullrun_mos2_xmm0414190301_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jan  2 14:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414190301_pi300-10000_cl_pass0_src1.csv
[Mon Jan  2 14:34:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0414190301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0414190301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan  2 14:34:51 2012] fullrun_mos2_xmm0414190301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jan  2 14:34:51 2012] fullrun_mos2_xmm0414190301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jan  2 14:34:51 2012] Fit fullrun_mos2_xmm0414190301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jan  2 14:35:02 2012] Spatial fit model total counts = 316630.000000, observed total counts = 332791.000000
[Mon Jan  2 14:35:02 2012] Offset between fit and detection position for source 1 = 0.192797 pixels
[Mon Jan  2 14:35:02 2012] 314068.000000 total counts/ 25600.000000 bgd. counts: snr = 1802.925000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.192797 pixels
  Position = (304.2, 320.2) = 12 29 6.77 2 3 8.3
  Extent = 6.7 (6.6-6.7)", rotation angle = 0
  Source counts = 288468.0 +/- 560.4
  Background counts = 25600.0
  Rate = 9 +/- 0.02
[Mon Jan  2 14:35:02 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 14:35:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 14:35:02 2012] Assessing source extent using major axis lower bound
[Mon Jan  2 14:35:02 2012] Source does appear to be extended
[Mon Jan  2 14:35:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 16:11:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan  2 16:11:24 2012] Initial guess for spatial extent in simple fitting = 6.67"
[Mon Jan  2 16:11:24 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.968
[Mon Jan  2 16:11:24 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.67"
[Tue Jan  3 04:00:46 2012] fullrun_mos2_xmm0414190301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jan  3 04:00:46 2012] fullrun_mos2_xmm0414190301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jan  3 04:00:46 2012] Fit fullrun_mos2_xmm0414190301_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Jan  3 04:00:47 2012] fullrun_mos2_xmm0414190301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jan  3 04:00:47 2012] fullrun_mos2_xmm0414190301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jan  3 04:00:47 2012] Fit fullrun_mos2_xmm0414190301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jan  3 04:00:54 2012] Spatial fit model total counts = 322033.000000, observed total counts = 332791.000000
[Tue Jan  3 04:00:54 2012] Offset between fit and detection position for source 1 = 0.049921 pixels
[Tue Jan  3 04:00:54 2012] 300406.000000 total counts/ 25600.000000 bgd. counts: snr = 1717.537500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.049921 pixels
  Position = (304.2, 320.3) = 12 29 6.77 2 3 8.5
  Extent = 6.6 (6.6-6.6)" x 5.8 (5.8-5.8)", rotation angle = 0 (360-0) degrees
  Source counts = 274806.0 +/- 548.1
  Background counts = 25600.0
  Rate = 9 +/- 0.02
[Tue Jan  3 04:00:54 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 04:00:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 04:00:54 2012] Assessing source extent using major axis lower bound
[Tue Jan  3 04:00:54 2012] Source does appear to be extended
[Tue Jan  3 04:00:54 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.13
[Tue Jan  3 06:05:15 2012] Counts = 274806.000000, rescaling region sizes by 3.000000
[Tue Jan  3 06:05:15 2012] XMMSAS src. selection expression = ellipse(26416.399640, 27815.947800, 1191.988834, 1045.884630, 0.000000, X, Y)
[Tue Jan  3 06:05:15 2012] Writing source region out to fullrun_mos2_xmm0414190301_pi300-10000_pass1_cl_src1_src.reg
[Tue Jan  3 06:05:15 2012] Extracting stamp from image fullrun_mos2_xmm0414190301_pi300-10000_cl_sm2.00.img.gz, (236, 252) - (373, 389)
[Tue Jan  3 06:05:15 2012] XMMSAS bgd. selection expression = annulus(26416.399640, 27815.947800, 5959.944171, 11919.888343, X, Y) && !ellipse(27424.991791, 27935.357452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35274.840950, 20855.246600, 450.888813, 450.888813, 0.000000, X, Y) && !ellipse(18304.796234, 21850.026321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27223.806946, 28326.400787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15687.305069, 18556.770462, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan  3 06:05:15 2012] Writing fullrun_mos2_xmm0414190301_pi300-10000_pass1_cl_src1.gif
[Tue Jan  3 06:05:42 2012] Mean detx,y = (-6.11, -88.87) 
[Tue Jan  3 06:05:47 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan  3 06:11:06 2012] Binned source spectrum to 10 counts/bin
[Tue Jan  3 06:11:06 2012] Setting source spectrum file to fullrun_mos2_xmm0414190301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jan  3 06:11:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0414190301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jan  3 06:35:50 2012] Updating aperture counts using extracted products
[Tue Jan  3 06:35:50 2012] Error reading totcts from fullrun_mos2_xmm0414190301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jan  3 06:35:50 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 06:35:50 2012] Using photon index=1.80, rate=8.54, arf fullrun_mos2_xmm0414190301_pi300-10000_pass1_cl_src1.arf
[Tue Jan  3 06:35:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 06:35:50 2012] Updating source flux to 8.7e-11
[Tue Jan  3 06:37:21 2012] Reading fit data from xmm0414190301/analysis//spectral/fullrun_mos2_xmm0414190301_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jan  3 06:37:21 2012] Spectral fit parameter nH value = 3.52259e+12
[Tue Jan  3 06:37:21 2012] Spectral fit parameter PhoIndex value = 1.5902
[Tue Jan  3 06:37:21 2012] Failed to get F(0.3-8.0) from xmm0414190301/analysis//spectral/fullrun_mos2_xmm0414190301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jan  3 06:37:21 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 06:37:21 2012] Using Nh = 3.5e+12, photon index=1.59, rate=8.54, arf fullrun_mos2_xmm0414190301_pi300-10000_pass1_cl_src1.arf
[Tue Jan  3 06:37:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 06:37:21 2012] Updating source flux to 9.6e-11