[Mon Jan  2 10:42:49 2012] Detection parameters:
  Position = (304.3, 320.1) = 12 29 6.73 2 3 8.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 379401.0 +/- 707.4
  Background counts = 31.3
  Rate = 1e+01 +/- 0.02

[Mon Jan  2 10:42:49 2012] Off-axis axis estimate = 1.63'
[Mon Jan  2 12:41:22 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Mon Jan  2 12:41:22 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Mon Jan  2 12:41:22 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853
[Mon Jan  2 12:41:22 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Mon Jan  2 13:02:38 2012] fullrun_mos1_xmm0414190301_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jan  2 13:02:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414190301_pi300-10000_cl_pass0_src1.csv
[Mon Jan  2 13:02:38 2012] fullrun_mos1_xmm0414190301_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jan  2 13:02:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414190301_pi300-10000_cl_pass0_src1.csv
[Mon Jan  2 13:02:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0414190301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0414190301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan  2 13:02:38 2012] fullrun_mos1_xmm0414190301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jan  2 13:02:38 2012] fullrun_mos1_xmm0414190301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jan  2 13:02:38 2012] Fit fullrun_mos1_xmm0414190301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jan  2 14:34:58 2012] Spatial fit model total counts = 313014.000000, observed total counts = 334060.000000
[Mon Jan  2 14:34:58 2012] Offset between fit and detection position for source 5 = 0.155014 pixels
[Mon Jan  2 14:34:58 2012] 312856.000000 total counts/ 25600.000000 bgd. counts: snr = 1795.350000
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.155014 pixels
  Position = (304.2, 320.2) = 12 29 6.77 2 3 8.4
  Extent = 6.6 (6.6-6.6)", rotation angle = 0
  Source counts = 287256.0 +/- 559.3
  Background counts = 25600.0
  Rate = 9 +/- 0.02
[Mon Jan  2 14:34:58 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 14:34:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 14:34:58 2012] Assessing source extent using major axis lower bound
[Mon Jan  2 14:34:58 2012] Source does appear to be extended
[Mon Jan  2 14:34:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 16:04:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan  2 16:04:14 2012] Initial guess for spatial extent in simple fitting = 6.62"
[Mon Jan  2 16:04:14 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.978
[Mon Jan  2 16:04:14 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.62"
[Mon Jan  2 16:11:24 2012] fullrun_mos1_xmm0414190301_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jan  2 16:11:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414190301_pi300-10000_cl_pass1_src1.csv
[Mon Jan  2 16:11:24 2012] fullrun_mos1_xmm0414190301_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jan  2 16:11:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414190301_pi300-10000_cl_pass1_src1.csv
[Mon Jan  2 16:11:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0414190301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0414190301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan  2 16:11:24 2012] fullrun_mos1_xmm0414190301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jan  2 16:11:24 2012] fullrun_mos1_xmm0414190301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jan  2 16:11:24 2012] Fit fullrun_mos1_xmm0414190301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jan  3 04:00:51 2012] Spatial fit model total counts = 312798.000000, observed total counts = 334060.000000
[Tue Jan  3 04:00:51 2012] Offset between fit and detection position for source 5 = 0.000130 pixels
[Tue Jan  3 04:00:51 2012] 312639.000000 total counts/ 25600.000000 bgd. counts: snr = 1793.993750
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.000130 pixels
  Position = (304.2, 320.2) = 12 29 6.77 2 3 8.4
  Extent = 6.6 (6.6-6.6)", rotation angle = 0
  Source counts = 287039.0 +/- 559.1
  Background counts = 25600.0
  Rate = 9 +/- 0.02
[Tue Jan  3 04:00:51 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 04:00:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 04:00:51 2012] Assessing source extent using major axis lower bound
[Tue Jan  3 04:00:51 2012] Source does appear to be extended
[Tue Jan  3 04:00:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan  3 05:17:49 2012] Counts = 287039.000000, rescaling region sizes by 3.000000
[Tue Jan  3 05:17:49 2012] XMMSAS src. selection expression = ellipse(26416.331180, 27812.791400, 1192.458634, 1192.458634, 0.000000, X, Y)
[Tue Jan  3 05:17:49 2012] Writing source region out to fullrun_mos1_xmm0414190301_pi300-10000_pass1_cl_src5_src.reg
[Tue Jan  3 05:17:49 2012] Extracting stamp from image fullrun_mos1_xmm0414190301_pi300-10000_cl_sm2.00.img.gz, (236, 252) - (373, 389)
[Tue Jan  3 05:17:49 2012] XMMSAS bgd. selection expression = annulus(26416.331180, 27812.791400, 5962.293172, 11924.586343, X, Y) && !ellipse(18314.763300, 21850.362400, 518.689615, 518.689615, 0.000000, X, Y) && !ellipse(15655.967758, 18543.282913, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan  3 05:17:49 2012] Writing fullrun_mos1_xmm0414190301_pi300-10000_pass1_cl_src5.gif
[Tue Jan  3 05:18:25 2012] Mean detx,y = (124.44, -141.12) 
[Tue Jan  3 05:18:29 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan  3 05:23:42 2012] Binned source spectrum to 10 counts/bin
[Tue Jan  3 05:23:43 2012] Setting source spectrum file to fullrun_mos1_xmm0414190301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Jan  3 05:23:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0414190301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue Jan  3 06:35:49 2012] Updating aperture counts using extracted products
[Tue Jan  3 06:35:49 2012] Error reading totcts from fullrun_mos1_xmm0414190301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Jan  3 06:35:49 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 06:35:49 2012] Using photon index=1.80, rate=8.93, arf fullrun_mos1_xmm0414190301_pi300-10000_pass1_cl_src5.arf
[Tue Jan  3 06:35:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 06:35:49 2012] Updating source flux to 8.2e-11
[Tue Jan  3 06:36:37 2012] Reading fit data from xmm0414190301/analysis//spectral/fullrun_mos1_xmm0414190301_pi300-10000_pass1_cl_src5_pl.csv
[Tue Jan  3 06:36:37 2012] Spectral fit parameter nH value = 21943800000.0
[Tue Jan  3 06:36:37 2012] Spectral fit parameter PhoIndex value = 1.6085
[Tue Jan  3 06:36:37 2012] Failed to get F(0.3-8.0) from xmm0414190301/analysis//spectral/fullrun_mos1_xmm0414190301_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Tue Jan  3 06:36:37 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 06:36:37 2012] Using Nh = 2.2e+10, photon index=1.61, rate=8.93, arf fullrun_mos1_xmm0414190301_pi300-10000_pass1_cl_src5.arf
[Tue Jan  3 06:36:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 06:36:37 2012] Updating source flux to 8.9e-11