[Fri May 10 09:02:08 2013] Detection parameters:
  Position = (275.1, 317.0) = 12 29 11.72 2 6 9.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2809.9 +/- 79.5
  Background counts = 725.3
  Rate = 0.06 +/- 0.002

[Fri May 10 09:02:09 2013] Off-axis axis estimate = 2.16'
[Fri May 10 09:21:50 2013] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Fri May 10 09:21:50 2013] Initial guess for spatial extent in simple fitting = 7.51"
[Fri May 10 09:21:50 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.807
[Fri May 10 09:21:50 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.51"
[Fri May 10 09:44:16 2013] fullrun_pn_xmm0414190101_pi300-10000_cl_pass0_src1.ximg exists
[Fri May 10 09:44:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414190101_pi300-10000_cl_pass0_src1.csv
[Fri May 10 09:44:16 2013] fullrun_pn_xmm0414190101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May 10 09:44:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414190101_pi300-10000_cl_pass0_src1.csv
[Fri May 10 09:44:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0414190101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0414190101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 09:44:16 2013] fullrun_pn_xmm0414190101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May 10 09:44:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414190101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri May 10 09:44:16 2013] fullrun_pn_xmm0414190101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 10 09:44:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414190101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri May 10 09:44:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0414190101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0414190101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 11:46:32 2013] Spatial fit model total counts = 14473.600000, observed total counts = 12690.000000
[Fri May 10 11:46:32 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 10 11:46:32 2013] Spatial fit model total counts = 17851.800000, observed total counts = 17819.000000
[Fri May 10 11:46:32 2013] Offset between fit and detection position for source 1 = 2.433214 pixels
[Fri May 10 11:46:32 2013] Warning, changing simple spatial fit ID from 1 to 2
[Fri May 10 11:46:32 2013] 17509.270000 total counts/ 12901.500000 bgd. counts: snr = 40.566794
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.433214 pixels
  Position = (276.0, 314.7) = 12 29 11.46 2 5 58.1
  Extent = 14.7 (14.7-29.4)" x 4.8 (4.5-5.0)", rotation angle = 67 (66-68) degrees
  Source counts = 4607.8 +/- 132.3
  Background counts = 12901.5
  Rate = 0.06 +/- 0.002
[Fri May 10 11:46:32 2013] Vigneting correction estimate = 1.000000
[Fri May 10 11:46:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 11:46:32 2013] Assessing source extent using major axis lower bound
[Fri May 10 11:46:32 2013] Source does appear to be extended
[Fri May 10 11:46:32 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.91
[Fri May 10 11:46:32 2013] Source is asymmetric
[Fri May 10 11:46:32 2013] Source is confused with source 2
[Fri May 10 11:46:32 2013] Source is confused with source 4
[Fri May 10 11:46:39 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 10 11:46:39 2013] Initial guess for spatial extent in simple fitting = 9.73"
[Fri May 10 11:46:39 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.001
[Fri May 10 11:46:39 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 9.73"
[Fri May 10 13:16:44 2013] fullrun_pn_xmm0414190101_pi300-10000_cl_pass1_src1.ximg exists
[Fri May 10 13:16:44 2013] fullrun_pn_xmm0414190101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May 10 13:16:44 2013] Fit fullrun_pn_xmm0414190101_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri May 10 13:16:44 2013] fullrun_pn_xmm0414190101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May 10 13:16:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414190101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri May 10 13:16:44 2013] fullrun_pn_xmm0414190101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May 10 13:16:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0414190101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri May 10 13:16:44 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0414190101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0414190101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 13:51:29 2013] Spatial fit model total counts = 19647.200000, observed total counts = 18679.000000
[Fri May 10 13:51:29 2013] Offset between fit and detection position for source 1 = 0.952515 pixels
[Fri May 10 13:51:29 2013] 19287.760000 total counts/ 13170.400000 bgd. counts: snr = 53.304584
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.952515 pixels
  Position = (276.4, 313.8) = 12 29 11.36 2 5 54.2
  Extent = 19.5 (19.4-38.9)" x 5.1 (4.8-5.3)", rotation angle = 68 (67-68) degrees
  Source counts = 6117.4 +/- 138.9
  Background counts = 13170.4
  Rate = 0.08 +/- 0.002
[Fri May 10 13:51:29 2013] Vigneting correction estimate = 1.000000
[Fri May 10 13:51:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 13:51:29 2013] Assessing source extent using major axis lower bound
[Fri May 10 13:51:29 2013] Source does appear to be extended
[Fri May 10 13:51:29 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.66
[Fri May 10 13:51:29 2013] Source is asymmetric
[Fri May 10 13:51:36 2013] Counts = 6117.360000, rescaling region sizes by 2.000000
[Fri May 10 13:51:36 2013] XMMSAS src. selection expression = ellipse(23996.486800, 27254.279200, 2336.316067, 607.000817, 67.817100, X, Y)
[Fri May 10 13:51:36 2013] Writing source region out to fullrun_pn_xmm0414190101_pi300-10000_pass1_cl_src1_src.reg
[Fri May 10 13:51:36 2013] Extracting stamp from image fullrun_pn_xmm0414190101_pi300-10000_cl_sm2.00.img.gz, (142, 180) - (411, 448)
[Fri May 10 13:51:36 2013] XMMSAS bgd. selection expression = annulus(23996.486800, 27254.279200, 7787.720224, 15575.440448, X, Y) && !ellipse(23901.792400, 27487.688000, 1174.392034, 413.591212, 65.012500, X, Y) && !ellipse(24146.347800, 26872.462000, 1508.664043, 373.136811, 67.058200, X, Y) && !ellipse(25361.169940, 23925.705800, 1997.491257, 1976.248857, 3.334790, X, Y)
[Fri May 10 13:51:36 2013] Writing fullrun_pn_xmm0414190101_pi300-10000_pass1_cl_src1.gif
[Fri May 10 13:56:16 2013] Mean detx,y = (521.91, 3038.82) 
[Fri May 10 13:56:29 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 10 13:58:32 2013] Binned source spectrum to 10 counts/bin
[Fri May 10 13:58:32 2013] Setting source spectrum file to fullrun_pn_xmm0414190101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri May 10 13:58:32 2013] Setting bgd. spectrum file to fullrun_pn_xmm0414190101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri May 10 15:42:52 2013] Updating aperture counts using extracted products
[Fri May 10 15:42:52 2013] Total counts from fullrun_pn_xmm0414190101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 27112.00
[Fri May 10 15:42:52 2013] Total counts from fullrun_pn_xmm0414190101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 0.00
[Fri May 10 15:42:52 2013] Got source and background scale factors 3594212.000000, 0.000000
[Fri May 10 15:42:52 2013] Background scale factor is not positive, halting re-assessment of this source
[Fri May 10 15:42:53 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 10 15:42:53 2013] Using photon index=1.80, rate=0.0798, arf fullrun_pn_xmm0414190101_pi300-10000_pass1_cl_src1.arf
[Fri May 10 15:42:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 10 15:42:53 2013] Updating source flux to 3.6e-13
[Fri May 10 15:43:02 2013] Flag p found in src. 1 procflags, skipping spectral fitting
[Fri May 10 15:43:02 2013] Flag c found in src. 1 procflags, skipping spectral fitting
[Fri May 10 15:43:06 2013] xmm0414190101/analysis//spectral/fullrun_pn_xmm0414190101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete