[Fri May 10 09:02:48 2013] Detection parameters:
  Position = (281.8, 278.4) = 12 29 9.79 2 3 23.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3317.5 +/- 139.3
  Background counts = 108.6
  Rate = 0.06 +/- 0.002

[Fri May 10 09:02:49 2013] Off-axis axis estimate = 1.89'
[Fri May 10 11:24:36 2013] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Fri May 10 11:24:36 2013] Initial guess for spatial extent in simple fitting = 7.37"
[Fri May 10 11:24:36 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.830
[Fri May 10 11:24:36 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.37"
[Fri May 10 11:46:30 2013] fullrun_mos2_xmm0414190101_pi300-10000_cl_pass0_src2.ximg exists
[Fri May 10 11:46:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414190101_pi300-10000_cl_pass0_src2.csv
[Fri May 10 11:46:30 2013] fullrun_mos2_xmm0414190101_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri May 10 11:46:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414190101_pi300-10000_cl_pass0_src2.csv
[Fri May 10 11:46:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0414190101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0414190101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 11:46:30 2013] fullrun_mos2_xmm0414190101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri May 10 11:46:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414190101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri May 10 11:46:30 2013] fullrun_mos2_xmm0414190101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri May 10 11:46:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414190101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri May 10 11:46:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0414190101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0414190101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 11:46:35 2013] Source 7 is offset by -6.001225 and 2.072084 pixels which is larger than
2 X fitted extent = 5.437747 x 3.562938, not incorporating fit results
[Fri May 10 11:46:35 2013] Vigneting correction estimate = 1.000000
[Fri May 10 11:46:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 11:46:35 2013] Assessing source extent using major
[Fri May 10 11:46:35 2013] Source does appear to be extended
[Fri May 10 11:46:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 11:46:35 2013] Source is confused with source 2
[Fri May 10 13:22:39 2013] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Fri May 10 13:22:39 2013] Initial guess for spatial extent in simple fitting = 7.37"
[Fri May 10 13:22:39 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.830
[Fri May 10 13:22:39 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 7.37"
[Fri May 10 13:51:27 2013] fullrun_mos2_xmm0414190101_pi300-10000_cl_pass1_src2.ximg exists
[Fri May 10 13:51:27 2013] fullrun_mos2_xmm0414190101_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri May 10 13:51:27 2013] Fit fullrun_mos2_xmm0414190101_pi300-10000_cl_pass1_src2 appears to have run properly
[Fri May 10 13:51:27 2013] fullrun_mos2_xmm0414190101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri May 10 13:51:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414190101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri May 10 13:51:27 2013] fullrun_mos2_xmm0414190101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri May 10 13:51:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414190101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri May 10 13:51:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0414190101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0414190101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 13:51:31 2013] Source 7 is offset by -6.001225 and 1.922497 pixels which is larger than
2 X fitted extent = 2.892694 x 3.504023, not incorporating fit results
[Fri May 10 13:51:31 2013] Vigneting correction estimate = 1.000000
[Fri May 10 13:51:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 13:51:31 2013] Assessing source extent using major
[Fri May 10 13:51:31 2013] Source does appear to be extended
[Fri May 10 13:51:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 14:39:24 2013] Counts = 3317.509277, rescaling region sizes by 2.000000
[Fri May 10 14:39:24 2013] XMMSAS src. selection expression = ellipse(24466.155457, 24175.841278, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri May 10 14:39:24 2013] Writing source region out to fullrun_mos2_xmm0414190101_pi300-10000_pass1_cl_src7_src.reg
[Fri May 10 14:39:24 2013] Extracting stamp from image fullrun_mos2_xmm0414190101_pi300-10000_cl_sm2.00.img.gz, (207, 203) - (357, 353)
[Fri May 10 14:39:24 2013] XMMSAS bgd. selection expression = annulus(24466.155457, 24175.841278, 4350.000000, 8700.000000, X, Y) && !ellipse(25353.823016, 23938.852400, 1618.965647, 1618.965647, 0.000000, X, Y) && !ellipse(24452.256378, 23769.520905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16946.443420, 16510.569916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17259.216492, 18091.002655, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 10 14:39:24 2013] Writing fullrun_mos2_xmm0414190101_pi300-10000_pass1_cl_src7.gif
[Fri May 10 14:43:58 2013] Mean detx,y = (-84.69, -23.35) 
[Fri May 10 14:44:03 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 10 14:45:49 2013] Binned source spectrum to 10 counts/bin
[Fri May 10 14:45:49 2013] Setting source spectrum file to fullrun_mos2_xmm0414190101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri May 10 14:45:49 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0414190101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Fri May 10 14:54:33 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 10 14:54:33 2013] rmf not generated due to insufficient counts
[Fri May 10 15:42:55 2013] Updating aperture counts using extracted products
[Fri May 10 15:42:55 2013] Total counts from fullrun_mos2_xmm0414190101_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 848566.00
[Fri May 10 15:42:55 2013] Total counts from fullrun_mos2_xmm0414190101_pi300-10000_pass1_cl_src7_bgd.pi.gz = 15330.00
[Fri May 10 15:42:55 2013] Got source and background scale factors 1975836.000000, 57189307.000000
[Fri May 10 15:42:55 2013] User source parameters:
  Position = (281.8, 278.4) = 12 29 9.79 2 3 23.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 848036.4 +/- 922.2
  Background aperture counts = 529.6
  Rate = 1e+01 +/- 0.01

[Fri May 10 15:42:55 2013] Updating counts from extracted products
[Fri May 10 15:42:55 2013] Set source signif. to 848036.36/23.01 = 36848.97
[Fri May 10 15:42:56 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 10 15:42:56 2013] Using photon index=1.80, rate=12.2, arf fullrun_mos2_xmm0414190101_pi300-10000_pass1_cl_src7.arf
[Fri May 10 15:42:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 10 15:42:56 2013] Updating source flux to 1.6e-10
[Fri May 10 15:43:00 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 10 15:43:02 2013] xmm0414190101/analysis//spectral/fullrun_mos2_xmm0414190101_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete