[Tue Jun 19 13:19:17 2012] Detection parameters:
  Position = (302.9, 298.0) = 5 25 11.92 -69 38 13.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49695.9 +/- 273.2
  Background counts = 47.7
  Rate = 2 +/- 0.009

[Tue Jun 19 13:19:17 2012] Off-axis axis estimate = 0.33'
[Wed Jun 20 06:34:31 2012] Using EEF radius (= 6.59 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 06:34:31 2012] Initial guess for spatial extent in simple fitting = 6.59"
[Wed Jun 20 06:34:31 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.985
[Wed Jun 20 06:34:31 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 6.59"
[Wed Jun 20 13:14:35 2012] fullrun_mos1_xmm0414180501_pi300-10000_cl_pass0_src4.ximg exists
[Wed Jun 20 13:14:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180501_pi300-10000_cl_pass0_src4.csv
[Wed Jun 20 13:14:35 2012] fullrun_mos1_xmm0414180501_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Jun 20 13:14:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180501_pi300-10000_cl_pass0_src4.csv
[Wed Jun 20 13:14:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0414180501_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0414180501_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 13:14:35 2012] fullrun_mos1_xmm0414180501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Jun 20 13:14:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180501_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Jun 20 13:14:35 2012] fullrun_mos1_xmm0414180501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Jun 20 13:14:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180501_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Jun 20 13:14:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0414180501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0414180501_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 20:59:25 2012] Spatial fit model total counts = 110945.000000, observed total counts = 138076.000000
[Wed Jun 20 20:59:25 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 20 20:59:25 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 20:59:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 20:59:25 2012] Assessing source extent using major
[Wed Jun 20 20:59:25 2012] Source does appear to be extended
[Wed Jun 20 20:59:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 20:59:25 2012] Source is confused with source 6