[Wed Aug  1 10:41:57 2012] Detection parameters:
  Position = (330.2, 343.5) = 5 24 48.81 -69 34 53.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 109.0 +/- 14.8
  Background counts = 69.8
  Rate = 0.005 +/- 0.0007

[Wed Aug  1 10:41:58 2012] Off-axis axis estimate = 3.99'
[Mon Aug  6 21:19:28 2012] Using EEF radius (= 8.43 ")to estimate initial spatial extent for simple fitting
[Mon Aug  6 21:19:28 2012] Initial guess for spatial extent in simple fitting = 8.43"
[Mon Aug  6 21:19:28 2012] source mask rpix=1.9, npix_max = 23, mask sum = 22, frac = 0.926
[Mon Aug  6 21:19:28 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 8.43"
[Tue Aug  7 12:38:23 2012] fullrun_mos2_xmm0414180401_pi300-10000_cl_pass0_src10.ximg exists
[Tue Aug  7 12:38:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414180401_pi300-10000_cl_pass0_src10.csv
[Tue Aug  7 12:38:24 2012] fullrun_mos2_xmm0414180401_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue Aug  7 12:38:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414180401_pi300-10000_cl_pass0_src10.csv
[Tue Aug  7 12:38:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0414180401_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0414180401_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 12:38:24 2012] fullrun_mos2_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue Aug  7 12:38:24 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue Aug  7 12:38:24 2012] fullrun_mos2_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Aug  7 12:38:24 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue Aug  7 12:38:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 12:38:38 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 11.207727 pixels away
[Tue Aug  7 12:38:38 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 12:38:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 12:38:38 2012] Assessing source extent using major
[Tue Aug  7 12:38:38 2012] Source does appear to be extended
[Tue Aug  7 12:38:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 12:38:38 2012] Deleting source due to low Poisson probability 0.8