[Wed Aug  1 10:41:17 2012] Detection parameters:
  Position = (302.9, 297.9) = 5 25 11.48 -69 38 13.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40183.7 +/- 239.4
  Background counts = 82.9
  Rate = 2 +/- 0.009

[Wed Aug  1 10:41:18 2012] Off-axis axis estimate = 0.33'
[Mon Aug  6 13:00:58 2012] Using EEF radius (= 6.59 ")to estimate initial spatial extent for simple fitting
[Mon Aug  6 13:00:58 2012] Initial guess for spatial extent in simple fitting = 6.59"
[Mon Aug  6 13:00:58 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.985
[Mon Aug  6 13:00:58 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 6.59"
[Mon Aug  6 21:19:28 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src4.ximg exists
[Mon Aug  6 21:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src4.csv
[Mon Aug  6 21:19:28 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon Aug  6 21:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src4.csv
[Mon Aug  6 21:19:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug  6 21:19:28 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon Aug  6 21:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon Aug  6 21:19:28 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Aug  6 21:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon Aug  6 21:19:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 12:38:32 2012] Spatial fit model total counts = 91050.800000, observed total counts = 111314.000000
[Tue Aug  7 12:38:32 2012] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug  7 12:38:32 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 12:38:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 12:38:32 2012] Assessing source extent using major
[Tue Aug  7 12:38:32 2012] Source does appear to be extended
[Tue Aug  7 12:38:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 15:08:05 2012] Using EEF radius (= 6.59 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 15:08:05 2012] Initial guess for spatial extent in simple fitting = 6.59"
[Thu Aug  9 15:08:05 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.985
[Thu Aug  9 15:08:05 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 6.59"
[Fri Aug 10 02:27:17 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_src4.ximg exists
[Fri Aug 10 02:27:17 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Aug 10 02:27:17 2012] Fit fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_src4 appears to have run properly
[Fri Aug 10 02:27:17 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Aug 10 02:27:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Aug 10 02:27:17 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Aug 10 02:27:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Aug 10 02:27:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 08:25:12 2012] Spatial fit model total counts = 108149.000000, observed total counts = 111314.000000
[Fri Aug 10 08:25:12 2012] Offset between fit and detection position for source 8 = 4.281855 pixels
[Fri Aug 10 08:25:12 2012] 85373.900000 total counts/ 25600.000000 bgd. counts: snr = 373.586875
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 4.281855 pixels
  Position = (304.0, 293.7) = 5 25 10.60 -69 38 33.2
  Extent = 13.2" x 13.2", rotation angle = 0
  Source counts = 59773.9 +/- 292.2
  Background counts = 25600.0
  Rate = 2 +/- 0.01
[Fri Aug 10 08:25:12 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 08:25:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 08:25:12 2012] Assessing source extent using major
[Fri Aug 10 08:25:12 2012] Source does appear to be extended
[Fri Aug 10 08:25:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 08:25:12 2012] Source is confused with source 1
[Sun Aug 12 09:52:02 2012] Counts = 59773.900000, rescaling region sizes by 3.000000
[Sun Aug 12 09:52:02 2012] XMMSAS src. selection expression = ellipse(26398.801200, 25506.026000, 2369.718068, 2369.718068, 0.000000, X, Y)
[Sun Aug 12 09:52:02 2012] Writing source region out to fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src8_src.reg
[Sun Aug 12 09:52:02 2012] Extracting stamp from image fullrun_mos1_xmm0414180401_pi300-10000_cl_sm2.00.img.gz, (168, 158) - (440, 430)
[Sun Aug 12 09:52:02 2012] XMMSAS bgd. selection expression = annulus(26398.801200, 25506.026000, 11848.590341, 23697.180682, X, Y) && !ellipse(27071.243200, 25094.141000, 5933.088171, 5933.088171, 0.000000, X, Y) && !ellipse(28028.126831, 25243.532104, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27491.010000, 25451.604000, 7010.136202, 7010.136202, 0.000000, X, Y) && !ellipse(28052.781600, 25655.988000, 3529.104102, 1830.280853, 87.590000, X, Y) && !ellipse(27490.302856, 26718.892059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26433.316000, 26626.684000, 1109.232032, 1109.232032, 0.000000, X, Y)
[Sun Aug 12 09:52:02 2012] Writing fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src8.gif
[Sun Aug 12 10:14:08 2012] Mean detx,y = (-1454.98, 43.29) 
[Sun Aug 12 10:14:17 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 10:30:25 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 10:30:25 2012] Setting source spectrum file to fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Aug 12 10:30:25 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Tue Aug 14 14:26:14 2012] Updating aperture counts using extracted products
[Tue Aug 14 14:26:14 2012] Error reading totcts from fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue Aug 14 14:26:15 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 14:26:15 2012] Using photon index=1.80, rate=2.09, arf fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src8.arf
[Tue Aug 14 14:26:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 14:26:15 2012] Updating source flux to 1.8e-11
[Tue Aug 14 14:26:17 2012] Flag p found in src. 8 procflags, skipping spectral fitting
[Tue Aug 14 14:26:17 2012] Flag c found in src. 8 procflags, skipping spectral fitting
[Tue Aug 14 14:29:06 2012] Reading fit data from xmm0414180401/analysis//spectral/fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src8_pl.csv
[Tue Aug 14 14:29:06 2012] Spectral fit parameter nH value = 6.83266e+21
[Tue Aug 14 14:29:06 2012] Spectral fit parameter PhoIndex value = 6.78305
[Tue Aug 14 14:29:06 2012] Failed to get F(0.3-8.0) from xmm0414180401/analysis//spectral/fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src8_pl.csv, possibly due to different flux energy range selected
[Tue Aug 14 14:29:06 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 14:29:06 2012] Using Nh = 6.8e+21, photon index=6.78, rate=2.09, arf fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src8.arf
[Tue Aug 14 14:29:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 14:29:06 2012] Updating source flux to 1.1e-11