[Wed Aug  1 10:41:17 2012] Detection parameters:
  Position = (298.5, 312.8) = 5 25 15.19 -69 37 14.3
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 336.4 +/- 32.5
  Background counts = 284.2
  Rate = 0.01 +/- 0.001

[Wed Aug  1 10:41:18 2012] Off-axis axis estimate = 1.04'
[Mon Aug  6 13:00:58 2012] Using EEF radius (= 6.95 ")to estimate initial spatial extent for simple fitting
[Mon Aug  6 13:00:58 2012] Initial guess for spatial extent in simple fitting = 6.95"
[Mon Aug  6 13:00:58 2012] source mask rpix=1.6, npix_max = 17, mask sum = 15, frac = 0.853
[Mon Aug  6 13:00:58 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 6.95"
[Mon Aug  6 21:19:28 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src7.ximg exists
[Mon Aug  6 21:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src7.csv
[Mon Aug  6 21:19:28 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon Aug  6 21:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src7.csv
[Mon Aug  6 21:19:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug  6 21:19:28 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon Aug  6 21:19:28 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon Aug  6 21:19:28 2012] Fit fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Tue Aug  7 12:38:32 2012] Source 7 is offset by -5.903615 and 6.146014 pixels which is larger than
2 X fitted extent = 5.455402 x 5.455402, not incorporating fit results
[Tue Aug  7 12:38:32 2012] Source 7 is offset by 4.852545 and 2.381738 pixels which is larger than
2 X fitted extent = 3.278460 x 3.278460, not incorporating fit results
[Tue Aug  7 12:38:32 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 12:38:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 12:38:32 2012] Assessing source extent using major
[Tue Aug  7 12:38:32 2012] Source does appear to be extended
[Tue Aug  7 12:38:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 15:08:05 2012] Using EEF radius (= 6.95 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 15:08:05 2012] Initial guess for spatial extent in simple fitting = 6.95"
[Thu Aug  9 15:08:05 2012] source mask rpix=1.6, npix_max = 17, mask sum = 15, frac = 0.853
[Thu Aug  9 15:08:05 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 6.95"
[Fri Aug 10 02:27:17 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_src7.ximg exists
[Fri Aug 10 02:27:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_src7.csv
[Fri Aug 10 02:27:17 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Aug 10 02:27:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_src7.csv
[Fri Aug 10 02:27:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 02:27:17 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Aug 10 02:27:17 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Aug 10 02:27:17 2012] Fit fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Aug 10 08:25:10 2012] Warning, spatial fit 4 centroid is now closest to src. 3
[Fri Aug 10 08:25:12 2012] Warning, spatial fit 5 centroid is now closest to src. 2
[Fri Aug 10 08:25:12 2012] Spatial fit model total counts = 5091.160000, observed total counts = 4796.000000
[Fri Aug 10 08:25:12 2012] Offset between fit and detection position for source 7 = 8.527722 pixels
[Fri Aug 10 08:25:12 2012] 5053.120000 total counts/ 3407.310000 bgd. counts: snr = 28.195115
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 8.527722 pixels
  Position = (304.4, 306.6) = 5 25 10.27 -69 37 37.1
  Extent = 13.9 (13.8-13.9)", rotation angle = 0
  Source counts = 1645.8 +/- 71.1
  Background counts = 3407.3
  Rate = 0.06 +/- 0.002
[Fri Aug 10 08:25:12 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 08:25:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 08:25:12 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 08:25:12 2012] Source does appear to be extended
[Fri Aug 10 08:25:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 08:25:12 2012] Source is confused with source 3
[Sun Aug 12 09:52:02 2012] Counts = 1645.810000, rescaling region sizes by 2.000000
[Sun Aug 12 09:52:02 2012] XMMSAS src. selection expression = ellipse(26433.316000, 26626.684000, 1663.848048, 1663.848048, 0.000000, X, Y)
[Sun Aug 12 09:52:02 2012] Writing source region out to fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src7_src.reg
[Sun Aug 12 09:52:02 2012] Extracting stamp from image fullrun_mos1_xmm0414180401_pi300-10000_cl_sm2.00.img.gz, (209, 211) - (400, 402)
[Sun Aug 12 09:52:02 2012] XMMSAS bgd. selection expression = annulus(26433.316000, 26626.684000, 5546.160160, 11092.320319, X, Y) && !ellipse(27071.243200, 25094.141000, 5933.088171, 5933.088171, 0.000000, X, Y) && !ellipse(28028.126831, 25243.532104, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27491.010000, 25451.604000, 7010.136202, 7010.136202, 0.000000, X, Y) && !ellipse(26398.801200, 25506.026000, 3159.624091, 3159.624091, 0.000000, X, Y) && !ellipse(28052.781600, 25655.988000, 3529.104102, 1830.280853, 87.590000, X, Y) && !ellipse(27490.302856, 26718.892059, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 12 09:52:02 2012] Writing fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src7.gif
[Sun Aug 12 10:48:13 2012] Mean detx,y = (-1194.53, -358.28) 
[Sun Aug 12 10:48:19 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 10:52:23 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 10:52:24 2012] Setting source spectrum file to fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Aug 12 10:52:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Tue Aug 14 14:26:15 2012] Updating aperture counts using extracted products
[Tue Aug 14 14:26:15 2012] Error reading totcts from fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Aug 14 14:26:15 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 14:26:15 2012] Using photon index=1.80, rate=0.0575, arf fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src7.arf
[Tue Aug 14 14:26:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 14:26:15 2012] Updating source flux to 5.3e-13
[Tue Aug 14 14:26:17 2012] Flag b found in src. 7 procflags, skipping spectral fitting
[Tue Aug 14 14:26:17 2012] Flag c found in src. 7 procflags, skipping spectral fitting