[Wed Aug  1 10:41:17 2012] Detection parameters:
  Position = (323.7, 293.6) = 5 24 54.21 -69 38 28.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 11716.7 +/- 283.0
  Background counts = 93.4
  Rate = 0.6 +/- 0.02

[Wed Aug  1 10:41:18 2012] Off-axis axis estimate = 1.86'
[Mon Aug  6 13:00:58 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Mon Aug  6 13:00:58 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Mon Aug  6 13:00:58 2012] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.781
[Mon Aug  6 13:00:58 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.36"
[Mon Aug  6 21:19:28 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src5.ximg exists
[Mon Aug  6 21:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src5.csv
[Mon Aug  6 21:19:28 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon Aug  6 21:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src5.csv
[Mon Aug  6 21:19:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug  6 21:19:28 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon Aug  6 21:19:28 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Aug  6 21:19:28 2012] Fit fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Aug  7 12:38:32 2012] Spatial fit model total counts = 79849.400000, observed total counts = 158968.000000
[Tue Aug  7 12:38:32 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug  7 12:38:32 2012] Warning, spatial fit 5 centroid is now closest to src. 3
[Tue Aug  7 12:38:32 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 12:38:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 12:38:32 2012] Assessing source extent using major
[Tue Aug  7 12:38:32 2012] Source does appear to be extended
[Tue Aug  7 12:38:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 12:38:32 2012] Source is confused with source 2
[Thu Aug  9 15:08:05 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 15:08:05 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Thu Aug  9 15:08:05 2012] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.781
[Thu Aug  9 15:08:05 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.36"
[Fri Aug 10 02:27:17 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_src5.ximg exists
[Fri Aug 10 02:27:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_src5.csv
[Fri Aug 10 02:27:17 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Aug 10 02:27:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_src5.csv
[Fri Aug 10 02:27:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 02:27:17 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Aug 10 02:27:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Aug 10 02:27:17 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Aug 10 02:27:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Aug 10 02:27:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 08:25:12 2012] Spatial fit model total counts = 241407.000000, observed total counts = 232115.000000
[Fri Aug 10 08:25:12 2012] Offset between fit and detection position for source 5 = 2.001310 pixels
[Fri Aug 10 08:25:12 2012] Warning, changing simple spatial fit ID from 5 to 2
[Fri Aug 10 08:25:12 2012] 96336.800000 total counts/ 25600.000000 bgd. counts: snr = 442.105000
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 2.001310 pixels
  Position = (323.0, 295.5) = 5 24 54.75 -69 38 25.6
  Extent = 14.7 (14.7-29.4)" x 7.6 (7.6-7.6)", rotation angle = 88 (88-88) degrees
  Source counts = 70736.8 +/- 310.4
  Background counts = 25600.0
  Rate = 2 +/- 0.01
[Fri Aug 10 08:25:12 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 08:25:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 08:25:12 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 08:25:12 2012] Source does appear to be extended
[Fri Aug 10 08:25:12 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.93
[Fri Aug 10 08:25:12 2012] Source is asymmetric
[Sun Aug 12 09:52:02 2012] Counts = 70736.800000, rescaling region sizes by 3.000000
[Sun Aug 12 09:52:02 2012] XMMSAS src. selection expression = ellipse(28052.781600, 25655.988000, 2646.828076, 1372.710639, 87.590000, X, Y)
[Sun Aug 12 09:52:02 2012] Writing source region out to fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src5_src.reg
[Sun Aug 12 09:52:02 2012] Extracting stamp from image fullrun_mos1_xmm0414180401_pi300-10000_cl_sm2.00.img.gz, (171, 143) - (475, 448)
[Sun Aug 12 09:52:02 2012] XMMSAS bgd. selection expression = annulus(28052.781600, 25655.988000, 13234.140381, 26468.280762, X, Y) && !ellipse(27071.243200, 25094.141000, 5933.088171, 5933.088171, 0.000000, X, Y) && !ellipse(28028.126831, 25243.532104, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27491.010000, 25451.604000, 7010.136202, 7010.136202, 0.000000, X, Y) && !ellipse(26398.801200, 25506.026000, 3159.624091, 3159.624091, 0.000000, X, Y) && !ellipse(27490.302856, 26718.892059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26433.316000, 26626.684000, 1109.232032, 1109.232032, 0.000000, X, Y)
[Sun Aug 12 09:52:02 2012] Writing fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src5.gif
[Sun Aug 12 10:31:14 2012] Mean detx,y = (-1405.19, 297.15) 
[Sun Aug 12 10:31:21 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 10:45:01 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 10:45:01 2012] Setting source spectrum file to fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Aug 12 10:45:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue Aug 14 14:26:14 2012] Updating aperture counts using extracted products
[Tue Aug 14 14:26:15 2012] Error reading totcts from fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Aug 14 14:26:15 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 14:26:15 2012] Using photon index=1.80, rate=2.47, arf fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src5.arf
[Tue Aug 14 14:26:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 14:26:15 2012] Updating source flux to 2.8e-11
[Tue Aug 14 14:26:17 2012] Flag p found in src. 5 procflags, skipping spectral fitting
[Tue Aug 14 14:26:17 2012] Flag c found in src. 5 procflags, skipping spectral fitting