[Wed Aug  1 10:41:17 2012] Detection parameters:
  Position = (316.5, 307.7) = 5 25 0.15 -69 37 41.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3679.6 +/- 103.8
  Background counts = 96.5
  Rate = 0.2 +/- 0.005

[Wed Aug  1 10:41:18 2012] Off-axis axis estimate = 1.47'
[Mon Aug  6 13:00:58 2012] Using EEF radius (= 7.17 ")to estimate initial spatial extent for simple fitting
[Mon Aug  6 13:00:58 2012] Initial guess for spatial extent in simple fitting = 7.17"
[Mon Aug  6 13:00:58 2012] source mask rpix=1.6, npix_max = 18, mask sum = 15, frac = 0.813
[Mon Aug  6 13:00:58 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.17"
[Mon Aug  6 21:19:28 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src6.ximg exists
[Mon Aug  6 21:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src6.csv
[Mon Aug  6 21:19:28 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon Aug  6 21:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src6.csv
[Mon Aug  6 21:19:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug  6 21:19:28 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon Aug  6 21:19:28 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Aug  6 21:19:28 2012] Fit fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Tue Aug  7 12:38:32 2012] Source 4 is offset by -0.185804 and 6.259863 pixels which is larger than
2 X fitted extent = 4.905058 x 4.905058, not incorporating fit results
[Tue Aug  7 12:38:32 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 12:38:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 12:38:32 2012] Assessing source extent using major
[Tue Aug  7 12:38:32 2012] Source does appear to be extended
[Tue Aug  7 12:38:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 15:08:05 2012] Using EEF radius (= 7.17 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 15:08:05 2012] Initial guess for spatial extent in simple fitting = 7.17"
[Thu Aug  9 15:08:05 2012] source mask rpix=1.6, npix_max = 18, mask sum = 15, frac = 0.813
[Thu Aug  9 15:08:05 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 7.17"
[Fri Aug 10 02:27:17 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_src6.ximg exists
[Fri Aug 10 02:27:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_src6.csv
[Fri Aug 10 02:27:17 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Aug 10 02:27:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_src6.csv
[Fri Aug 10 02:27:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 02:27:17 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Aug 10 02:27:17 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Aug 10 02:27:17 2012] Fit fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Aug 10 08:25:12 2012] Source 4 is offset by -0.188383 and 6.259863 pixels which is larger than
2 X fitted extent = 4.904506 x 4.904506, not incorporating fit results
[Fri Aug 10 08:25:12 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 08:25:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 08:25:12 2012] Assessing source extent using major
[Fri Aug 10 08:25:12 2012] Source does appear to be extended
[Fri Aug 10 08:25:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 08:25:12 2012] Source is confused with source 3
[Sun Aug 12 09:52:02 2012] Counts = 3679.617920, rescaling region sizes by 2.000000
[Sun Aug 12 09:52:02 2012] XMMSAS src. selection expression = ellipse(27490.302856, 26718.892059, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Aug 12 09:52:02 2012] Writing source region out to fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src4_src.reg
[Sun Aug 12 09:52:02 2012] Extracting stamp from image fullrun_mos1_xmm0414180401_pi300-10000_cl_sm2.00.img.gz, (242, 233) - (392, 383)
[Sun Aug 12 09:52:02 2012] XMMSAS bgd. selection expression = annulus(27490.302856, 26718.892059, 4350.000000, 8700.000000, X, Y) && !ellipse(27071.243200, 25094.141000, 5933.088171, 5933.088171, 0.000000, X, Y) && !ellipse(28028.126831, 25243.532104, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27491.010000, 25451.604000, 7010.136202, 7010.136202, 0.000000, X, Y) && !ellipse(26398.801200, 25506.026000, 3159.624091, 3159.624091, 0.000000, X, Y) && !ellipse(28052.781600, 25655.988000, 3529.104102, 1830.280853, 87.590000, X, Y) && !ellipse(26433.316000, 26626.684000, 1109.232032, 1109.232032, 0.000000, X, Y)
[Sun Aug 12 09:52:02 2012] Writing fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src4.gif
[Sun Aug 12 10:45:30 2012] Mean detx,y = (-811.63, -12.35) 
[Sun Aug 12 10:45:35 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 10:47:41 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 10:47:41 2012] Setting source spectrum file to fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Aug 12 10:47:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Aug 14 12:18:02 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 14 12:18:02 2012] rmf not generated due to insufficient counts
[Tue Aug 14 14:26:15 2012] Updating aperture counts using extracted products
[Tue Aug 14 14:26:15 2012] Error reading totcts from fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Aug 14 14:26:15 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 14:26:15 2012] Using photon index=1.80, rate=0.162, arf fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src4.arf
[Tue Aug 14 14:26:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 14:26:15 2012] Updating source flux to 1.5e-12
[Tue Aug 14 14:26:17 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting