[Wed Aug  1 10:41:17 2012] Detection parameters:
  Position = (320.4, 299.8) = 5 24 56.95 -69 38 10.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44885.5 +/- 257.8
  Background counts = 103.3
  Rate = 2 +/- 0.01

[Wed Aug  1 10:41:18 2012] Off-axis axis estimate = 1.59'
[Mon Aug  6 13:00:58 2012] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Mon Aug  6 13:00:58 2012] Initial guess for spatial extent in simple fitting = 7.23"
[Mon Aug  6 13:00:58 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.857
[Mon Aug  6 13:00:58 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.23"
[Mon Aug  6 21:19:28 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src3.ximg exists
[Mon Aug  6 21:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src3.csv
[Mon Aug  6 21:19:28 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Aug  6 21:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src3.csv
[Mon Aug  6 21:19:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug  6 21:19:28 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Aug  6 21:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Aug  6 21:19:28 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Aug  6 21:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Aug  6 21:19:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 12:38:32 2012] Warning, spatial fit 3 centroid is now closest to src. 5
[Tue Aug  7 12:38:32 2012] Spatial fit model total counts = 205229.000000, observed total counts = 196100.000000
[Tue Aug  7 12:38:32 2012] Offset between fit and detection position for source 3 = 4.216396 pixels
[Tue Aug  7 12:38:32 2012] Warning, changing simple spatial fit ID from 3 to 5
[Tue Aug  7 12:38:32 2012] 165025.000000 total counts/ 25600.000000 bgd. counts: snr = 871.406250
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 4.216396 pixels
  Position = (319.4, 295.7) = 5 24 57.80 -69 38 24.5
  Extent = 14.7 (14.7-29.4)", rotation angle = 0
  Source counts = 139425.0 +/- 406.2
  Background counts = 25600.0
  Rate = 5 +/- 0.01
[Tue Aug  7 12:38:32 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 12:38:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 12:38:32 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 12:38:32 2012] Source does appear to be extended
[Tue Aug  7 12:38:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 12:38:32 2012] Source is confused with source 2
[Thu Aug  9 15:08:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug  9 15:08:05 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug  9 15:08:05 2012] Initial guess for spatial extent in simple fitting = 14.72"
[Thu Aug  9 15:08:05 2012] source mask rpix=3.4, npix_max = 60, mask sum = 36, frac = 0.597
[Thu Aug  9 15:08:05 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 14.72"
[Fri Aug 10 02:27:17 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_src3.ximg exists
[Fri Aug 10 02:27:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_src3.csv
[Fri Aug 10 02:27:17 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Aug 10 02:27:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_src3.csv
[Fri Aug 10 02:27:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 02:27:17 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Aug 10 02:27:17 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Aug 10 02:27:17 2012] Fit fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Aug 10 08:25:12 2012] Spatial fit model total counts = 354822.000000, observed total counts = 345609.000000
[Fri Aug 10 08:25:12 2012] Offset between fit and detection position for source 3 = 3.832090 pixels
[Fri Aug 10 08:25:12 2012] 302083.000000 total counts/ 40000.000000 bgd. counts: snr = 1310.415000
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 3.832090 pixels
  Position = (316.5, 293.1) = 5 25 0.13 -69 38 35.9
  Extent = 29.2 (29.2-29.2)", rotation angle = 0
  Source counts = 262083.0 +/- 549.6
  Background counts = 40000.0
  Rate = 9 +/- 0.02
[Fri Aug 10 08:25:12 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 08:25:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 08:25:12 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 08:25:12 2012] Source does appear to be extended
[Fri Aug 10 08:25:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 09:52:02 2012] Counts = 262083.000000, rescaling region sizes by 3.000000
[Sun Aug 12 09:52:02 2012] XMMSAS src. selection expression = ellipse(27491.010000, 25451.604000, 5257.602151, 5257.602151, 0.000000, X, Y)
[Sun Aug 12 09:52:02 2012] Writing source region out to fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src3_src.reg
[Sun Aug 12 09:52:02 2012] Extracting stamp from image fullrun_mos1_xmm0414180401_pi300-10000_cl_sm2.00.img.gz, (14, 0) - (595, 595)
[Sun Aug 12 09:52:02 2012] XMMSAS bgd. selection expression = annulus(27491.010000, 25451.604000, 26288.010756, 52576.021513, X, Y) && !ellipse(27071.243200, 25094.141000, 5933.088171, 5933.088171, 0.000000, X, Y) && !ellipse(28028.126831, 25243.532104, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26398.801200, 25506.026000, 3159.624091, 3159.624091, 0.000000, X, Y) && !ellipse(28052.781600, 25655.988000, 3529.104102, 1830.280853, 87.590000, X, Y) && !ellipse(27490.302856, 26718.892059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26433.316000, 26626.684000, 1109.232032, 1109.232032, 0.000000, X, Y)
[Sun Aug 12 09:52:02 2012] Writing fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src3.gif
[Sun Aug 12 10:10:06 2012] Mean detx,y = (-1398.70, 85.11) 
[Sun Aug 12 10:10:13 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 10:13:04 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 10:13:04 2012] Setting source spectrum file to fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Aug 12 10:13:04 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Aug 14 14:26:14 2012] Updating aperture counts using extracted products
[Tue Aug 14 14:26:14 2012] Error reading totcts from fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Aug 14 14:26:15 2012] No arf file for this source, not re-computing flux
[Tue Aug 14 14:26:17 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Tue Aug 14 14:26:17 2012] Source 3 has no response, skipping
[Tue Aug 14 14:29:06 2012] xmm0414180401/analysis//spectral/fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete