[Wed Aug  1 10:41:17 2012] Detection parameters:
  Position = (281.8, 309.7) = 5 25 29.12 -69 37 20.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.0 +/- 16.7
  Background counts = 60.0
  Rate = 0.004 +/- 0.0008

[Wed Aug  1 10:41:18 2012] Off-axis axis estimate = 1.46'
[Mon Aug  6 13:00:58 2012] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Mon Aug  6 13:00:58 2012] Initial guess for spatial extent in simple fitting = 7.16"
[Mon Aug  6 13:00:58 2012] source mask rpix=1.6, npix_max = 18, mask sum = 14, frac = 0.760
[Mon Aug  6 13:00:58 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.16"
[Mon Aug  6 21:19:28 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src11.ximg exists
[Mon Aug  6 21:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src11.csv
[Mon Aug  6 21:19:28 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon Aug  6 21:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src11.csv
[Mon Aug  6 21:19:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug  6 21:19:28 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon Aug  6 21:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon Aug  6 21:19:28 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon Aug  6 21:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon Aug  6 21:19:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 12:38:32 2012] Warning, spatial fit 11 centroid is now closest to src. 13
[Tue Aug  7 12:38:32 2012] Source 14 is offset by 5.227977 and -0.536775 pixels which is larger than
2 X fitted extent = 1.403012 x 1.403012, not incorporating fit results
[Tue Aug  7 12:38:32 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 12:38:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 12:38:32 2012] Assessing source extent using major
[Tue Aug  7 12:38:32 2012] Source does appear to be extended
[Tue Aug  7 12:38:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 12:38:32 2012] Deleting source due to low Poisson probability 0.8