[Wed Aug  1 10:41:17 2012] Detection parameters:
  Position = (287.6, 316.9) = 5 25 24.25 -69 36 50.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.4 +/- 17.5
  Background counts = 65.8
  Rate = 0.003 +/- 0.0007

[Wed Aug  1 10:41:18 2012] Off-axis axis estimate = 1.55'
[Mon Aug  6 13:00:58 2012] Using EEF radius (= 7.20 ")to estimate initial spatial extent for simple fitting
[Mon Aug  6 13:00:58 2012] Initial guess for spatial extent in simple fitting = 7.20"
[Mon Aug  6 13:00:58 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.076
[Mon Aug  6 13:00:58 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 7.20"
[Mon Aug  6 21:19:28 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src15.ximg exists
[Mon Aug  6 21:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src15.csv
[Mon Aug  6 21:19:28 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src15_1.ximg exists
[Mon Aug  6 21:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src15.csv
[Mon Aug  6 21:19:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug  6 21:19:28 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Mon Aug  6 21:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src15.csv
[Mon Aug  6 21:19:28 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Mon Aug  6 21:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src15.csv
[Mon Aug  6 21:19:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 12:38:32 2012] Source 13 is offset by -1.700752 and -4.251687 pixels which is larger than
2 X fitted extent = 10.849747 x 1.432869, not incorporating fit results
[Tue Aug  7 12:38:32 2012] Warning, spatial fit 15 centroid is now closest to src. 7
[Tue Aug  7 12:38:32 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 12:38:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 12:38:32 2012] Assessing source extent using major
[Tue Aug  7 12:38:32 2012] Source does appear to be extended
[Tue Aug  7 12:38:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 12:38:32 2012] Deleting source due to low Poisson probability 0.7