[Wed Aug  1 10:41:16 2012] Detection parameters:
  Position = (311.9, 286.1) = 5 25 3.97 -69 39 5.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100897.4 +/- 372.3
  Background counts = 92.5
  Rate = 4 +/- 0.01

[Wed Aug  1 10:41:18 2012] Off-axis axis estimate = 1.32'
[Mon Aug  6 13:00:58 2012] Using EEF radius (= 7.09 ")to estimate initial spatial extent for simple fitting
[Mon Aug  6 13:00:58 2012] Initial guess for spatial extent in simple fitting = 7.09"
[Mon Aug  6 13:00:58 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.882
[Mon Aug  6 13:00:58 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.09"
[Mon Aug  6 21:19:28 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src1.ximg exists
[Mon Aug  6 21:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src1.csv
[Mon Aug  6 21:19:28 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Aug  6 21:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src1.csv
[Mon Aug  6 21:19:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug  6 21:19:28 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Aug  6 21:19:28 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Aug  6 21:19:28 2012] Fit fullrun_mos1_xmm0414180401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Aug  7 12:38:32 2012] Spatial fit model total counts = 266460.000000, observed total counts = 286405.000000
[Tue Aug  7 12:38:32 2012] Offset between fit and detection position for source 1 = 1.971527 pixels
[Tue Aug  7 12:38:32 2012] 254565.000000 total counts/ 25600.000000 bgd. counts: snr = 1431.031250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.971527 pixels
  Position = (313.3, 287.5) = 5 25 2.80 -69 39 0.3
  Extent = 14.2 (14.2-28.4)", rotation angle = 0
  Source counts = 228965.0 +/- 504.5
  Background counts = 25600.0
  Rate = 8 +/- 0.02
[Tue Aug  7 12:38:32 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 12:38:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 12:38:32 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 12:38:32 2012] Source does appear to be extended
[Tue Aug  7 12:38:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 15:08:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug  9 15:08:05 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug  9 15:08:05 2012] Initial guess for spatial extent in simple fitting = 14.18"
[Thu Aug  9 15:08:05 2012] source mask rpix=3.3, npix_max = 56, mask sum = 49, frac = 0.866
[Thu Aug  9 15:08:05 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.18"
[Fri Aug 10 02:27:17 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug 10 02:27:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_src1.csv
[Fri Aug 10 02:27:17 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug 10 02:27:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_src1.csv
[Fri Aug 10 02:27:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 02:27:17 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug 10 02:27:17 2012] fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug 10 02:27:17 2012] Fit fullrun_mos1_xmm0414180401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Aug 10 08:25:12 2012] Spatial fit model total counts = 472537.000000, observed total counts = 500828.000000
[Fri Aug 10 08:25:12 2012] Offset between fit and detection position for source 1 = 2.212926 pixels
[Fri Aug 10 08:25:12 2012] 476004.000000 total counts/ 67600.000000 bgd. counts: snr = 1570.784615
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.212926 pixels
  Position = (311.7, 289.0) = 5 25 4.15 -69 38 53.7
  Extent = 24.7 (24.7-24.7)", rotation angle = 0
  Source counts = 408404.0 +/- 689.9
  Background counts = 67600.0
  Rate = 1e+01 +/- 0.02
[Fri Aug 10 08:25:12 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 08:25:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 08:25:12 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 08:25:12 2012] Source does appear to be extended
[Fri Aug 10 08:25:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 08:25:12 2012] Source is confused with source 2
[Fri Aug 10 08:25:12 2012] Source is confused with source 3
[Fri Aug 10 08:25:12 2012] Source is confused with source 8
[Fri Aug 10 08:25:12 2012] Source is confused with source 5
[Sun Aug 12 09:52:01 2012] Counts = 408404.000000, rescaling region sizes by 3.000000
[Sun Aug 12 09:52:02 2012] XMMSAS src. selection expression = ellipse(27071.243200, 25094.141000, 4449.816128, 4449.816128, 0.000000, X, Y)
[Sun Aug 12 09:52:02 2012] Writing source region out to fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src1_src.reg
[Sun Aug 12 09:52:02 2012] Extracting stamp from image fullrun_mos1_xmm0414180401_pi300-10000_cl_sm2.00.img.gz, (56, 33) - (567, 545)
[Sun Aug 12 09:52:02 2012] XMMSAS bgd. selection expression = annulus(27071.243200, 25094.141000, 22249.080640, 44498.161280, X, Y) && !ellipse(28028.126831, 25243.532104, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27491.010000, 25451.604000, 7010.136202, 7010.136202, 0.000000, X, Y) && !ellipse(26398.801200, 25506.026000, 3159.624091, 3159.624091, 0.000000, X, Y) && !ellipse(28052.781600, 25655.988000, 3529.104102, 1830.280853, 87.590000, X, Y) && !ellipse(27490.302856, 26718.892059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26433.316000, 26626.684000, 1109.232032, 1109.232032, 0.000000, X, Y)
[Sun Aug 12 09:52:02 2012] Writing fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src1.gif
[Sun Aug 12 09:52:29 2012] Mean detx,y = (-1412.88, 84.31) 
[Sun Aug 12 09:52:35 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 09:55:25 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 09:55:26 2012] Setting source spectrum file to fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug 12 09:55:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Aug 14 14:26:14 2012] Updating aperture counts using extracted products
[Tue Aug 14 14:26:14 2012] Error reading totcts from fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 14 14:26:15 2012] No arf file for this source, not re-computing flux
[Tue Aug 14 14:26:17 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Tue Aug 14 14:26:17 2012] Source 1 has no response, skipping
[Tue Aug 14 14:29:06 2012] xmm0414180401/analysis//spectral/fullrun_mos1_xmm0414180401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete