[Fri May  4 03:46:40 2012] Detection parameters:
  Position = (314.4, 302.9) = 5 25 1.97 -69 37 53.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30137.2 +/- 227.4
  Background counts = 68.3
  Rate = 0.9 +/- 0.007

[Fri May  4 03:46:41 2012] Off-axis axis estimate = 1.20'
[Fri May  4 19:46:28 2012] Using EEF radius (= 7.03 ")to estimate initial spatial extent for simple fitting
[Fri May  4 19:46:28 2012] Initial guess for spatial extent in simple fitting = 7.03"
[Fri May  4 19:46:28 2012] source mask rpix=1.6, npix_max = 17, mask sum = 18, frac = 1.005
[Fri May  4 19:46:28 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.03"
[Mon May  7 02:38:53 2012] fullrun_mos2_xmm0414180101_pi300-10000_cl_pass0_src6.ximg exists
[Mon May  7 02:38:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414180101_pi300-10000_cl_pass0_src6.csv
[Mon May  7 02:38:53 2012] fullrun_mos2_xmm0414180101_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon May  7 02:38:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414180101_pi300-10000_cl_pass0_src6.csv
[Mon May  7 02:38:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0414180101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0414180101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 02:38:53 2012] fullrun_mos2_xmm0414180101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon May  7 02:38:53 2012] fullrun_mos2_xmm0414180101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon May  7 02:38:53 2012] Fit fullrun_mos2_xmm0414180101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Mon May  7 02:39:13 2012] Spatial fit model total counts = 142907.000000, observed total counts = 153308.000000
[Mon May  7 02:39:13 2012] Offset between fit and detection position for source 8 = 3.291838 pixels
[Mon May  7 02:39:13 2012] 131228.000000 total counts/ 25600.000000 bgd. counts: snr = 660.175000
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 3.291838 pixels
  Position = (314.8, 299.7) = 5 25 1.65 -69 38 8.2
  Extent = 14.1 (14.1-28.1)", rotation angle = 0
  Source counts = 105628.0 +/- 362.3
  Background counts = 25600.0
  Rate = 3 +/- 0.01
[Mon May  7 02:39:13 2012] Vigneting correction estimate = 1.000000
[Mon May  7 02:39:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 02:39:13 2012] Assessing source extent using major axis lower bound
[Mon May  7 02:39:13 2012] Source does appear to be extended
[Mon May  7 02:39:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 02:39:13 2012] Source is confused with source 3
[Thu May 10 00:53:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 10 00:53:55 2012] Initial guess for spatial extent in simple fitting = 14.06"
[Thu May 10 00:53:55 2012] source mask rpix=3.2, npix_max = 55, mask sum = 37, frac = 0.664
[Thu May 10 00:53:55 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 14.06"
[Fri May 11 14:54:26 2012] fullrun_mos2_xmm0414180101_pi300-10000_cl_pass1_src6.ximg exists
[Fri May 11 14:54:26 2012] fullrun_mos2_xmm0414180101_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri May 11 14:54:26 2012] Fit fullrun_mos2_xmm0414180101_pi300-10000_cl_pass1_src6 appears to have run properly
[Fri May 11 14:54:26 2012] fullrun_mos2_xmm0414180101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri May 11 14:54:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414180101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri May 11 14:54:26 2012] fullrun_mos2_xmm0414180101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri May 11 14:54:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414180101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri May 11 14:54:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0414180101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0414180101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 14:54:38 2012] Warning, spatial fit 6 centroid is now closest to src. 4
[Fri May 11 14:54:38 2012] Vigneting correction estimate = 1.000000
[Fri May 11 14:54:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 14:54:38 2012] Assessing source extent using major axis lower bound
[Fri May 11 14:54:38 2012] Source does appear to be extended
[Fri May 11 14:54:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 15 04:56:23 2012] Counts = 105628.000000, rescaling region sizes by 3.000000
[Tue May 15 04:56:23 2012] XMMSAS src. selection expression = ellipse(27338.184800, 26021.548000, 2530.818073, 2530.818073, 0.000000, X, Y)
[Tue May 15 04:56:23 2012] Writing source region out to fullrun_mos2_xmm0414180101_pi300-10000_pass1_cl_src8_src.reg
[Tue May 15 04:56:23 2012] Extracting stamp from image fullrun_mos2_xmm0414180101_pi300-10000_cl_sm2.00.img.gz, (169, 154) - (460, 445)
[Tue May 15 04:56:23 2012] XMMSAS bgd. selection expression = annulus(27338.184800, 26021.548000, 12654.090364, 25308.180728, X, Y) && !ellipse(27029.534000, 25290.076000, 6997.080201, 6997.080201, 0.000000, X, Y) && !ellipse(27612.032920, 24958.396800, 3500.160101, 3500.160101, 347.447000, X, Y) && !ellipse(27994.798248, 25517.517853, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26589.152000, 25862.625400, 6997.080201, 6997.080201, 0.000000, X, Y) && !ellipse(26361.879400, 25956.648200, 3151.344091, 3151.344091, 0.000000, X, Y)
[Tue May 15 04:56:23 2012] Writing fullrun_mos2_xmm0414180101_pi300-10000_pass1_cl_src8.gif
[Tue May 15 05:37:39 2012] Mean detx,y = (-167.15, -1590.14) 
[Tue May 15 05:37:44 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 15 05:49:40 2012] Binned source spectrum to 10 counts/bin
[Tue May 15 05:49:40 2012] Setting source spectrum file to fullrun_mos2_xmm0414180101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue May 15 05:49:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0414180101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Tue May 15 06:18:53 2012] Updating aperture counts using extracted products
[Tue May 15 06:18:53 2012] Error reading totcts from fullrun_mos2_xmm0414180101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue May 15 06:18:53 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 06:18:53 2012] Using photon index=1.80, rate=3.01, arf fullrun_mos2_xmm0414180101_pi300-10000_pass1_cl_src8.arf
[Tue May 15 06:18:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 06:18:53 2012] Updating source flux to 2.6e-11
[Tue May 15 06:20:25 2012] Flag c found in src. 8 procflags, skipping spectral fitting