[Fri May  4 03:46:41 2012] Detection parameters:
  Position = (279.4, 312.5) = 5 25 31.13 -69 37 9.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.6 +/- 13.9
  Background counts = 52.7
  Rate = 0.002 +/- 0.0005

[Fri May  4 03:46:41 2012] Off-axis axis estimate = 1.72'
[Fri May  4 19:46:28 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri May  4 19:46:28 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Fri May  4 19:46:28 2012] source mask rpix=1.7, npix_max = 18, mask sum = 17, frac = 0.898
[Fri May  4 19:46:28 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 7.29"
[Mon May  7 02:38:53 2012] fullrun_mos2_xmm0414180101_pi300-10000_cl_pass0_src14.ximg exists
[Mon May  7 02:38:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414180101_pi300-10000_cl_pass0_src14.csv
[Mon May  7 02:38:53 2012] fullrun_mos2_xmm0414180101_pi300-10000_cl_pass0_src14_1.ximg exists
[Mon May  7 02:38:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414180101_pi300-10000_cl_pass0_src14.csv
[Mon May  7 02:38:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0414180101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0414180101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 02:38:53 2012] fullrun_mos2_xmm0414180101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Mon May  7 02:38:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414180101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Mon May  7 02:38:53 2012] fullrun_mos2_xmm0414180101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Mon May  7 02:38:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0414180101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Mon May  7 02:38:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0414180101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0414180101_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 02:39:13 2012] Source 16 is offset by -6.227259 and -4.919869 pixels which is larger than
2 X fitted extent = 4.119025 x 4.119025, not incorporating fit results
[Mon May  7 02:39:13 2012] Vigneting correction estimate = 1.000000
[Mon May  7 02:39:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 02:39:13 2012] Assessing source extent using major
[Mon May  7 02:39:13 2012] Source does appear to be extended
[Mon May  7 02:39:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 02:39:13 2012] Deleting source due to low Poisson probability 0.7