[Tue Feb 14 14:57:38 2012] Detection parameters:
  Position = (311.6, 445.3) = 17 10 0.15 -22 1 44.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.2 +/- 10.7
  Background counts = 21.6
  Rate = 0.003 +/- 0.0005

[Tue Feb 14 14:57:38 2012] Off-axis axis estimate = 10.69'
[Tue Feb 14 14:59:31 2012] Using EEF radius (= 11.77 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 14:59:31 2012] Initial guess for spatial extent in simple fitting = 11.77"
[Tue Feb 14 14:59:31 2012] source mask rpix=2.7, npix_max = 41, mask sum = 24, frac = 0.583
[Tue Feb 14 14:59:31 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 11.77"
[Tue Feb 14 15:17:25 2012] fullrun_pn_xmm0413780401_pi300-10000_cl_pass0_src14.ximg exists
[Tue Feb 14 15:17:25 2012] fullrun_pn_xmm0413780401_pi300-10000_cl_pass0_src14_1.ximg exists
[Tue Feb 14 15:17:25 2012] Fit fullrun_pn_xmm0413780401_pi300-10000_cl_pass0_src14 appears to have run properly
[Tue Feb 14 15:17:25 2012] fullrun_pn_xmm0413780401_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Tue Feb 14 15:17:25 2012] fullrun_pn_xmm0413780401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Tue Feb 14 15:17:25 2012] Fit fullrun_pn_xmm0413780401_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Tue Feb 14 15:47:57 2012] Spatial fit model total counts = 181.950000, observed total counts = 196.000000
[Tue Feb 14 15:47:57 2012] Offset between fit and detection position for source 15 = 1.382013 pixels
[Tue Feb 14 15:47:57 2012] 165.890900 total counts/ 101.945000 bgd. counts: snr = 6.333295
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 1.382013 pixels
  Position = (312.9, 445.7) = 17 9 59.74 -22 1 48.3
  Extent = 7.3 (4.8-9.8)" x 3.2 (2.9-4.2)", rotation angle = 15 (4-35) degrees
  Source counts = 63.9 +/- 12.9
  Background counts = 101.9
  Rate = 0.003 +/- 0.0006
[Tue Feb 14 15:47:57 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 15:47:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 15:47:57 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 15:47:57 2012] Source does appear to be extended
[Tue Feb 14 15:47:57 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.16
[Tue Feb 14 15:48:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 14 15:48:07 2012] Initial guess for spatial extent in simple fitting = 5.23"
[Tue Feb 14 15:48:07 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.034
[Tue Feb 14 15:48:07 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 5.23"
[Tue Feb 14 16:04:11 2012] fullrun_pn_xmm0413780401_pi300-10000_cl_pass1_src14.ximg exists
[Tue Feb 14 16:04:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0413780401_pi300-10000_cl_pass1_src14.csv
[Tue Feb 14 16:04:11 2012] fullrun_pn_xmm0413780401_pi300-10000_cl_pass1_src14_1.ximg exists
[Tue Feb 14 16:04:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0413780401_pi300-10000_cl_pass1_src14.csv
[Tue Feb 14 16:04:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0413780401_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0413780401_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 16:04:11 2012] fullrun_pn_xmm0413780401_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Tue Feb 14 16:04:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0413780401_pi300-10000_cl_pass1_tfrozen_src14.csv
[Tue Feb 14 16:04:11 2012] fullrun_pn_xmm0413780401_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Tue Feb 14 16:04:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0413780401_pi300-10000_cl_pass1_tfrozen_src14.csv
[Tue Feb 14 16:04:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0413780401_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0413780401_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 16:31:51 2012] Spatial fit model total counts = 159.822000, observed total counts = 189.000000
[Tue Feb 14 16:31:51 2012] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Feb 14 16:31:51 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 16:31:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 16:31:51 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 16:31:51 2012] Source does appear to be extended
[Tue Feb 14 16:31:51 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.16
[Tue Feb 14 16:32:01 2012] XMMSAS src. selection expression = ellipse(27176.475200, 38729.236400, 435.593413, 192.579006, 15.165217, X, Y)
[Tue Feb 14 16:32:01 2012] Writing source region out to fullrun_pn_xmm0413780401_pi300-10000_pass1_cl_src15_src.reg
[Tue Feb 14 16:32:01 2012] Extracting stamp from image fullrun_pn_xmm0413780401_pi300-10000_cl_sm2.00.img.gz, (288, 421) - (338, 471)
[Tue Feb 14 16:32:01 2012] XMMSAS bgd. selection expression = annulus(27176.475200, 38729.236400, 725.989021, 1451.978042, X, Y)
[Tue Feb 14 16:32:01 2012] Writing fullrun_pn_xmm0413780401_pi300-10000_pass1_cl_src15.gif
[Tue Feb 14 16:41:17 2012] Mean detx,y = (-2515.14, 14264.56) 
[Tue Feb 14 16:41:20 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 14 16:41:39 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 14 16:41:40 2012] Setting source spectrum file to fullrun_pn_xmm0413780401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Tue Feb 14 16:41:40 2012] Setting bgd. spectrum file to fullrun_pn_xmm0413780401_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Tue Feb 14 16:48:26 2012] Not generating rmf since there are only 63 counts
[Tue Feb 14 16:48:26 2012] rmf not generated due to insufficient counts
[Tue Feb 14 16:58:54 2012] Updating aperture counts using extracted products
[Tue Feb 14 16:58:54 2012] Error reading totcts from fullrun_pn_xmm0413780401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Tue Feb 14 16:58:54 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 16:58:54 2012] Using photon index=1.80, rate=0.00298, arf fullrun_pn_xmm0413780401_pi300-10000_pass1_cl_src15.arf
[Tue Feb 14 16:58:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 14 16:58:54 2012] Updating source flux to 9.7e-14
[Tue Feb 14 16:59:06 2012] Flag p found in src. 15 procflags, skipping spectral fitting
[Tue Feb 14 16:59:06 2012] Source 15 has fewer than 100.000000 counts, skipping spectral fitting