[Tue Jun  5 13:08:54 2012] Detection parameters:
  Position = (232.4, 155.7) = 17 9 59.57 -22 22 13.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 189.9 +/- 19.4
  Background counts = 51.2
  Rate = 0.008 +/- 0.0008

[Tue Jun  5 13:08:54 2012] Off-axis axis estimate = 11.40'
[Tue Jun  5 13:12:16 2012] Using EEF radius (= 12.13 ")to estimate initial spatial extent for simple fitting
[Tue Jun  5 13:12:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun  5 13:12:16 2012] Initial guess for spatial extent in simple fitting = 12.13"
[Tue Jun  5 13:12:16 2012] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.133
[Tue Jun  5 13:12:16 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.13"
[Tue Jun  5 13:35:44 2012] fullrun_pn_xmm0413780301_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun  5 13:35:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0413780301_pi300-10000_cl_pass0_src1.csv
[Tue Jun  5 13:35:44 2012] fullrun_pn_xmm0413780301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun  5 13:35:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0413780301_pi300-10000_cl_pass0_src1.csv
[Tue Jun  5 13:35:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0413780301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0413780301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 13:35:44 2012] fullrun_pn_xmm0413780301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun  5 13:35:44 2012] fullrun_pn_xmm0413780301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun  5 13:35:44 2012] Fit fullrun_pn_xmm0413780301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun  5 14:15:12 2012] Spatial fit model total counts = 766.586000, observed total counts = 749.000000
[Tue Jun  5 14:15:12 2012] Offset between fit and detection position for source 1 = 0.177730 pixels
[Tue Jun  5 14:15:12 2012] 765.894000 total counts/ 653.034000 bgd. counts: snr = 4.416438
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.177730 pixels
  Position = (232.3, 155.6) = 17 9 59.61 -22 22 13.2
  Extent = 4.9 (4.0-6.2)", rotation angle = 0
  Source counts = 112.9 +/- 27.7
  Background counts = 653.0
  Rate = 0.005 +/- 0.001
[Tue Jun  5 14:15:12 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 14:15:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 14:15:12 2012] Assessing source extent using major axis lower bound
[Tue Jun  5 14:15:12 2012] Source does appear to be extended
[Tue Jun  5 14:15:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 14:15:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun  5 14:15:29 2012] Initial guess for spatial extent in simple fitting = 4.92"
[Tue Jun  5 14:15:29 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.846
[Tue Jun  5 14:15:29 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.92"
[Tue Jun  5 14:38:52 2012] fullrun_pn_xmm0413780301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun  5 14:38:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0413780301_pi300-10000_cl_pass1_src1.csv
[Tue Jun  5 14:38:52 2012] fullrun_pn_xmm0413780301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun  5 14:38:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0413780301_pi300-10000_cl_pass1_src1.csv
[Tue Jun  5 14:38:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0413780301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0413780301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 14:38:52 2012] fullrun_pn_xmm0413780301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun  5 14:38:52 2012] fullrun_pn_xmm0413780301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun  5 14:38:52 2012] Fit fullrun_pn_xmm0413780301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jun  5 15:12:40 2012] Spatial fit model total counts = 480.811000, observed total counts = 472.000000
[Tue Jun  5 15:12:40 2012] Offset between fit and detection position for source 1 = 0.016871 pixels
[Tue Jun  5 15:12:40 2012] 482.412000 total counts/ 374.849000 bgd. counts: snr = 5.555648
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.016871 pixels
  Position = (232.3, 155.6) = 17 9 59.61 -22 22 13.2
  Extent = 4.8 (3.8-5.9)", rotation angle = 0
  Source counts = 107.6 +/- 22.0
  Background counts = 374.8
  Rate = 0.005 +/- 0.001
[Tue Jun  5 15:12:40 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 15:12:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 15:12:40 2012] Assessing source extent using major axis lower bound
[Tue Jun  5 15:12:40 2012] Source does appear to be extended
[Tue Jun  5 15:12:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 15:12:55 2012] XMMSAS src. selection expression = ellipse(20160.603600, 13487.460200, 286.064408, 286.064408, 0.000000, X, Y)
[Tue Jun  5 15:12:55 2012] Writing source region out to fullrun_pn_xmm0413780301_pi300-10000_pass1_cl_src1_src.reg
[Tue Jun  5 15:12:55 2012] Extracting stamp from image fullrun_pn_xmm0413780301_pi300-10000_cl_sm2.00.img.gz, (216, 139) - (249, 172)
[Tue Jun  5 15:12:55 2012] XMMSAS bgd. selection expression = annulus(20160.603600, 13487.460200, 476.774014, 953.548027, X, Y)
[Tue Jun  5 15:12:55 2012] Writing fullrun_pn_xmm0413780301_pi300-10000_pass1_cl_src1.gif
[Tue Jun  5 15:13:07 2012] Mean detx,y = (6758.52, -9770.72) 
[Tue Jun  5 15:13:12 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun  5 15:13:26 2012] Binned source spectrum to 10 counts/bin
[Tue Jun  5 15:13:26 2012] Setting source spectrum file to fullrun_pn_xmm0413780301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun  5 15:13:26 2012] Setting bgd. spectrum file to fullrun_pn_xmm0413780301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jun  5 15:50:30 2012] Updating aperture counts using extracted products
[Tue Jun  5 15:50:30 2012] Error reading totcts from fullrun_pn_xmm0413780301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun  5 15:50:30 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun  5 15:50:30 2012] Using photon index=1.80, rate=0.00516, arf fullrun_pn_xmm0413780301_pi300-10000_pass1_cl_src1.arf
[Tue Jun  5 15:50:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun  5 15:50:31 2012] Updating source flux to 4.7e-14
[Tue Jun  5 15:51:44 2012] Reading fit data from xmm0413780301/analysis//spectral/fullrun_pn_xmm0413780301_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jun  5 15:51:44 2012] Spectral fit parameter nH value = 3.87266e+21
[Tue Jun  5 15:51:44 2012] Spectral fit parameter PhoIndex value = 5.11209
[Tue Jun  5 15:51:44 2012] Failed to get F(0.3-8.0) from xmm0413780301/analysis//spectral/fullrun_pn_xmm0413780301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jun  5 15:51:44 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun  5 15:51:44 2012] Using Nh = 3.9e+21, photon index=5.11, rate=0.00516, arf fullrun_pn_xmm0413780301_pi300-10000_pass1_cl_src1.arf
[Tue Jun  5 15:51:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun  5 15:51:44 2012] Updating source flux to 2.7e-14