[Tue Dec 27 23:04:10 2011] Detection parameters:
  Position = (348.8, 282.0) = 17 7 38.35 -22 11 4.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.2 +/- 11.6
  Background counts = 10.1
  Rate = 0.003 +/- 0.0006

[Tue Dec 27 23:04:11 2011] Off-axis axis estimate = 3.84'
[Wed Dec 28 02:15:23 2011] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 02:15:23 2011] Initial guess for spatial extent in simple fitting = 8.35"
[Wed Dec 28 02:15:23 2011] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.854
[Wed Dec 28 02:15:23 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 8.35"
[Wed Dec 28 03:30:32 2011] fullrun_mos2_xmm0413780201_pi300-10000_cl_pass0_src7.ximg exists
[Wed Dec 28 03:30:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0413780201_pi300-10000_cl_pass0_src7.csv
[Wed Dec 28 03:30:32 2011] fullrun_mos2_xmm0413780201_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Dec 28 03:30:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0413780201_pi300-10000_cl_pass0_src7.csv
[Wed Dec 28 03:30:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0413780201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0413780201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 03:30:32 2011] fullrun_mos2_xmm0413780201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Dec 28 03:30:32 2011] fullrun_mos2_xmm0413780201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Dec 28 03:30:32 2011] Fit fullrun_mos2_xmm0413780201_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Wed Dec 28 03:31:00 2011] Spatial fit model total counts = 234.188000, observed total counts = 234.000000
[Wed Dec 28 03:31:00 2011] Offset between fit and detection position for source 8 = 0.099326 pixels
[Wed Dec 28 03:31:00 2011] 229.160500 total counts/ 177.684000 bgd. counts: snr = 3.861756
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.099326 pixels
  Position = (348.8, 281.9) = 17 7 38.36 -22 11 5.2
  Extent = 7.9 (5.3-16.7)", rotation angle = 0
  Source counts = 51.5 +/- 15.1
  Background counts = 177.7
  Rate = 0.002 +/- 0.0006
[Wed Dec 28 03:31:00 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 03:31:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 03:31:00 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 03:31:00 2011] Source does appear to be extended
[Wed Dec 28 03:31:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 03:31:00 2011] Source is confused with source 9
[Wed Dec 28 06:41:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 28 06:41:39 2011] Initial guess for spatial extent in simple fitting = 7.93"
[Wed Dec 28 06:41:39 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.927
[Wed Dec 28 06:41:39 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 7.93"
[Wed Dec 28 07:47:28 2011] fullrun_mos2_xmm0413780201_pi300-10000_cl_pass1_src7.ximg exists
[Wed Dec 28 07:47:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0413780201_pi300-10000_cl_pass1_src7.csv
[Wed Dec 28 07:47:28 2011] fullrun_mos2_xmm0413780201_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Dec 28 07:47:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0413780201_pi300-10000_cl_pass1_src7.csv
[Wed Dec 28 07:47:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0413780201_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0413780201_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 07:47:28 2011] fullrun_mos2_xmm0413780201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Dec 28 07:47:28 2011] fullrun_mos2_xmm0413780201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Dec 28 07:47:28 2011] Fit fullrun_mos2_xmm0413780201_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Dec 28 07:47:51 2011] Warning, spatial fit 7 centroid is now closest to src. 9
[Wed Dec 28 07:47:51 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 07:47:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 07:47:51 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 07:47:51 2011] Source does appear to be extended
[Wed Dec 28 07:47:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 10:24:05 2011] XMMSAS src. selection expression = ellipse(30297.404380, 24478.714800, 475.520414, 475.520414, 0.000000, X, Y)
[Wed Dec 28 10:24:05 2011] Writing source region out to fullrun_mos2_xmm0413780201_pi300-10000_pass1_cl_src8_src.reg
[Wed Dec 28 10:24:05 2011] Extracting stamp from image fullrun_mos2_xmm0413780201_pi300-10000_cl_sm2.00.img.gz, (321, 255) - (376, 309)
[Wed Dec 28 10:24:05 2011] XMMSAS bgd. selection expression = annulus(30297.404380, 24478.714800, 792.534023, 1585.068046, X, Y) && !ellipse(29310.199200, 25174.760600, 183.609605, 183.609605, 0.000000, X, Y) && !ellipse(30258.260600, 24479.624000, 1337.144038, 1337.144038, 0.000000, X, Y)
[Wed Dec 28 10:24:05 2011] Writing fullrun_mos2_xmm0413780201_pi300-10000_pass1_cl_src8.gif
[Wed Dec 28 10:31:44 2011] Mean detx,y = (5373.36, 329.16) 
[Wed Dec 28 10:31:49 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 10:32:39 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 10:32:39 2011] Setting source spectrum file to fullrun_mos2_xmm0413780201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Dec 28 10:32:39 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0413780201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed Dec 28 10:40:47 2011] Not generating rmf since there are only 51 counts
[Wed Dec 28 10:40:47 2011] rmf not generated due to insufficient counts
[Wed Dec 28 10:55:22 2011] Updating aperture counts using extracted products
[Wed Dec 28 10:55:22 2011] Error reading totcts from fullrun_mos2_xmm0413780201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Dec 28 10:55:24 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 10:55:24 2011] Using photon index=1.80, rate=0.00195, arf fullrun_mos2_xmm0413780201_pi300-10000_pass1_cl_src8.arf
[Wed Dec 28 10:55:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 10:55:24 2011] Updating source flux to 3.2e-14
[Wed Dec 28 10:56:17 2011] Flag c found in src. 8 procflags, skipping spectral fitting
[Wed Dec 28 10:56:17 2011] Source 8 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Dec 28 10:56:44 2011] xmm0413780201/analysis//spectral/fullrun_mos2_xmm0413780201_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete