[Fri Mar 23 10:28:39 2012] Detection parameters:
  Position = (334.3, 314.1) = 17 4 45.47 -22 5 19.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 220.5 +/- 21.3
  Background counts = 42.7
  Rate = 0.01 +/- 0.001

[Fri Mar 23 10:28:41 2012] Off-axis axis estimate = 2.83'
[Fri Mar 23 10:32:27 2012] Using EEF radius (= 7.84 ")to estimate initial spatial extent for simple fitting
[Fri Mar 23 10:32:27 2012] Initial guess for spatial extent in simple fitting = 7.84"
[Fri Mar 23 10:32:27 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.942
[Fri Mar 23 10:32:27 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.84"
[Fri Mar 23 13:10:03 2012] fullrun_pn_xmm0413780101_pi300-10000_cl_pass0_src5.ximg exists
[Fri Mar 23 13:10:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0413780101_pi300-10000_cl_pass0_src5.csv
[Fri Mar 23 13:10:03 2012] fullrun_pn_xmm0413780101_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Mar 23 13:10:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0413780101_pi300-10000_cl_pass0_src5.csv
[Fri Mar 23 13:10:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0413780101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0413780101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 23 13:10:03 2012] fullrun_pn_xmm0413780101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Mar 23 13:10:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0413780101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri Mar 23 13:10:03 2012] fullrun_pn_xmm0413780101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Mar 23 13:10:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0413780101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri Mar 23 13:10:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0413780101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0413780101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 23 16:02:15 2012] Spatial fit model total counts = 1600.110000, observed total counts = 1377.000000
[Fri Mar 23 16:02:15 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar 23 16:02:15 2012] Source 5 is offset by 2.500915 and -8.675758 pixels which is larger than
2 X fitted extent = 0.968772 x 0.968772, not incorporating fit results
[Fri Mar 23 16:02:15 2012] Vigneting correction estimate = 1.000000
[Fri Mar 23 16:02:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 23 16:02:15 2012] Assessing source extent using major
[Fri Mar 23 16:02:15 2012] Source does appear to be extended
[Fri Mar 23 16:02:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 23 16:02:15 2012] Source is confused with source 1
[Fri Mar 23 16:02:40 2012] Using EEF radius (= 7.84 ")to estimate initial spatial extent for simple fitting
[Fri Mar 23 16:02:40 2012] Initial guess for spatial extent in simple fitting = 7.84"
[Fri Mar 23 16:02:40 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.942
[Fri Mar 23 16:02:40 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.84"
[Fri Mar 23 17:48:26 2012] fullrun_pn_xmm0413780101_pi300-10000_cl_pass1_src5.ximg exists
[Fri Mar 23 17:48:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0413780101_pi300-10000_cl_pass1_src5.csv
[Fri Mar 23 17:48:26 2012] fullrun_pn_xmm0413780101_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Mar 23 17:48:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0413780101_pi300-10000_cl_pass1_src5.csv
[Fri Mar 23 17:48:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0413780101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0413780101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 23 17:48:26 2012] fullrun_pn_xmm0413780101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Mar 23 17:48:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0413780101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Mar 23 17:48:26 2012] fullrun_pn_xmm0413780101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Mar 23 17:48:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0413780101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Mar 23 17:48:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0413780101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0413780101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 23 20:11:52 2012] Source 5 is offset by -8.315543 and 1.057596 pixels which is larger than
2 X fitted extent = 6.779632 x 6.779632, not incorporating fit results
[Fri Mar 23 20:11:52 2012] Spatial fit model total counts = 2787.360000, observed total counts = 2789.000000
[Fri Mar 23 20:11:52 2012] Offset between fit and detection position for source 5 = 8.685076 pixels
[Fri Mar 23 20:11:52 2012] Warning, changing simple spatial fit ID from 5 to 4
[Fri Mar 23 20:11:52 2012] 2720.550000 total counts/ 1611.030000 bgd. counts: snr = 27.642882
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 8.685076 pixels
  Position = (342.8, 315.3) = 17 4 42.78 -22 5 13.6
  Extent = 33.1 (29.9-66.1)" x 23.2 (17.7-27.7)", rotation angle = 153 (49-255) degrees
  Source counts = 1109.5 +/- 52.2
  Background counts = 1611.0
  Rate = 0.05 +/- 0.002
[Fri Mar 23 20:11:52 2012] Source 5 is offset by 1.636115 and 7.490214 pixels which is larger than
2 X fitted extent = 0.901715 x 0.901715, not incorporating fit results
[Fri Mar 23 20:11:52 2012] Vigneting correction estimate = 1.000000
[Fri Mar 23 20:11:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 23 20:11:52 2012] Assessing source extent using major axis lower bound
[Fri Mar 23 20:11:52 2012] Source does appear to be extended
[Fri Mar 23 20:11:52 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.08
[Fri Mar 23 20:12:15 2012] Counts = 1109.520000, rescaling region sizes by 2.000000
[Fri Mar 23 20:12:15 2012] XMMSAS src. selection expression = ellipse(29779.436000, 27380.554600, 3967.896114, 2788.224080, 153.060000, X, Y)
[Fri Mar 23 20:12:15 2012] Writing source region out to fullrun_pn_xmm0413780101_pi300-10000_pass1_cl_src5_src.reg
[Fri Mar 23 20:12:15 2012] Extracting stamp from image fullrun_pn_xmm0413780101_pi300-10000_cl_sm2.00.img.gz, (115, 87) - (571, 543)
[Fri Mar 23 20:12:15 2012] XMMSAS bgd. selection expression = annulus(29779.436000, 27380.554600, 13226.320381, 26452.640761, X, Y) && !ellipse(29650.914800, 27114.919400, 589.828017, 589.828017, 0.000000, X, Y) && !ellipse(16576.272598, 28422.173004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29947.718000, 28144.364000, 1383.536040, 1383.536040, 0.000000, X, Y) && !ellipse(30121.977000, 27494.360000, 1322.632038, 1322.632038, 0.000000, X, Y) && !ellipse(25199.150000, 25387.274000, 853.784025, 853.784025, 0.000000, X, Y) && !ellipse(35434.017761, 20386.527710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29251.423615, 30589.741577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30552.718000, 28954.790000, 2767.072080, 2767.072080, 0.000000, X, Y) && !ellipse(29486.576904, 28599.353729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31026.483276, 27362.888000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27226.153992, 27011.224060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27899.063202, 26664.368378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28413.228210, 26316.007294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15568.027878, 25219.732422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25591.112610, 24776.122162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15821.001724, 24286.399353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13126.479600, 19516.350400, 923.503917, 923.503917, 0.000000, X, Y) && !ellipse(17072.144455, 20951.373245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34757.171143, 33901.619812, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 23 20:12:15 2012] Writing fullrun_pn_xmm0413780101_pi300-10000_pass1_cl_src5.gif
[Fri Mar 23 20:19:51 2012] Mean detx,y = (-4877.40, 2755.14) 
[Fri Mar 23 20:20:03 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 23 20:38:51 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 23 20:38:52 2012] Setting source spectrum file to fullrun_pn_xmm0413780101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Mar 23 20:38:52 2012] Setting bgd. spectrum file to fullrun_pn_xmm0413780101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Mar 23 22:03:41 2012] Updating aperture counts using extracted products
[Fri Mar 23 22:03:41 2012] Error reading totcts from fullrun_pn_xmm0413780101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Mar 23 22:03:43 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 23 22:03:43 2012] Using photon index=1.80, rate=0.0491, arf fullrun_pn_xmm0413780101_pi300-10000_pass1_cl_src5.arf
[Fri Mar 23 22:03:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 23 22:03:43 2012] Updating source flux to 1.8e-13
[Fri Mar 23 22:04:34 2012] Flag b found in src. 5 procflags, skipping spectral fitting
[Fri Mar 23 22:04:34 2012] Flag p found in src. 5 procflags, skipping spectral fitting
[Fri Mar 23 22:04:34 2012] Flag c found in src. 5 procflags, skipping spectral fitting