[Fri Mar 23 10:28:41 2012] Detection parameters:
  Position = (151.1, 224.3) = 17 5 42.81 -22 11 48.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.0 +/- 12.0
  Background counts = 25.6
  Rate = 0.002 +/- 0.0005

[Fri Mar 23 10:28:41 2012] Off-axis axis estimate = 11.95'
[Fri Mar 23 10:32:27 2012] Using EEF radius (= 12.41 ")to estimate initial spatial extent for simple fitting
[Fri Mar 23 10:32:27 2012] Initial guess for spatial extent in simple fitting = 12.41"
[Fri Mar 23 10:32:27 2012] source mask rpix=2.9, npix_max = 44, mask sum = 42, frac = 0.935
[Fri Mar 23 10:32:27 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 12.41"
[Fri Mar 23 13:10:03 2012] fullrun_pn_xmm0413780101_pi300-10000_cl_pass0_src29.ximg exists
[Fri Mar 23 13:10:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0413780101_pi300-10000_cl_pass0_src29.csv
[Fri Mar 23 13:10:03 2012] fullrun_pn_xmm0413780101_pi300-10000_cl_pass0_src29_1.ximg exists
[Fri Mar 23 13:10:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0413780101_pi300-10000_cl_pass0_src29.csv
[Fri Mar 23 13:10:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0413780101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0413780101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 23 13:10:04 2012] fullrun_pn_xmm0413780101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Fri Mar 23 13:10:04 2012] fullrun_pn_xmm0413780101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Fri Mar 23 13:10:04 2012] Fit fullrun_pn_xmm0413780101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Fri Mar 23 16:02:15 2012] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 15.805821 pixels away
[Fri Mar 23 16:02:15 2012] Vigneting correction estimate = 1.000000
[Fri Mar 23 16:02:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 23 16:02:15 2012] Assessing source extent using major
[Fri Mar 23 16:02:15 2012] Source does appear to be extended
[Fri Mar 23 16:02:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 23 16:02:40 2012] Using EEF radius (= 12.41 ")to estimate initial spatial extent for simple fitting
[Fri Mar 23 16:02:40 2012] Initial guess for spatial extent in simple fitting = 12.41"
[Fri Mar 23 16:02:40 2012] source mask rpix=2.9, npix_max = 44, mask sum = 42, frac = 0.935
[Fri Mar 23 16:02:40 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 12.41"
[Fri Mar 23 17:48:26 2012] fullrun_pn_xmm0413780101_pi300-10000_cl_pass1_src23.ximg exists
[Fri Mar 23 17:48:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0413780101_pi300-10000_cl_pass1_src23.csv
[Fri Mar 23 17:48:26 2012] fullrun_pn_xmm0413780101_pi300-10000_cl_pass1_src23_1.ximg exists
[Fri Mar 23 17:48:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0413780101_pi300-10000_cl_pass1_src23.csv
[Fri Mar 23 17:48:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0413780101_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0413780101_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 23 17:48:27 2012] fullrun_pn_xmm0413780101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Fri Mar 23 17:48:27 2012] fullrun_pn_xmm0413780101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Fri Mar 23 17:48:27 2012] Fit fullrun_pn_xmm0413780101_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Fri Mar 23 20:11:52 2012] Spatial fit model total counts = 365.998000, observed total counts = 366.000000
[Fri Mar 23 20:11:52 2012] Offset between fit and detection position for source 30 = 0.621003 pixels
[Fri Mar 23 20:11:52 2012] 367.724400 total counts/ 286.366000 bgd. counts: snr = 4.807748
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.621003 pixels
  Position = (151.4, 224.9) = 17 5 42.72 -22 11 46.5
  Extent = 11.5 (4.8-24.8)", rotation angle = 0
  Source counts = 81.4 +/- 19.2
  Background counts = 286.4
  Rate = 0.004 +/- 0.0008
[Fri Mar 23 20:11:52 2012] Vigneting correction estimate = 1.000000
[Fri Mar 23 20:11:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 23 20:11:52 2012] Assessing source extent using major axis lower bound
[Fri Mar 23 20:11:52 2012] Source does appear to be extended
[Fri Mar 23 20:11:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 23 20:12:15 2012] XMMSAS src. selection expression = ellipse(13126.479600, 19516.350400, 692.627937, 692.627937, 0.000000, X, Y)
[Fri Mar 23 20:12:15 2012] Writing source region out to fullrun_pn_xmm0413780101_pi300-10000_pass1_cl_src30_src.reg
[Fri Mar 23 20:12:15 2012] Extracting stamp from image fullrun_pn_xmm0413780101_pi300-10000_cl_sm2.00.img.gz, (112, 185) - (191, 265)
[Fri Mar 23 20:12:15 2012] XMMSAS bgd. selection expression = annulus(13126.479600, 19516.350400, 1154.379896, 2308.759792, X, Y)
[Fri Mar 23 20:12:15 2012] Writing fullrun_pn_xmm0413780101_pi300-10000_pass1_cl_src30.gif
[Fri Mar 23 20:55:20 2012] Mean detx,y = (12030.74, -4238.71) 
[Fri Mar 23 20:55:25 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 23 20:56:03 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 23 20:56:04 2012] Setting source spectrum file to fullrun_pn_xmm0413780101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri Mar 23 20:56:04 2012] Setting bgd. spectrum file to fullrun_pn_xmm0413780101_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Fri Mar 23 21:26:03 2012] Not generating rmf since there are only 81 counts
[Fri Mar 23 21:26:03 2012] rmf not generated due to insufficient counts
[Fri Mar 23 22:03:42 2012] Updating aperture counts using extracted products
[Fri Mar 23 22:03:42 2012] Error reading totcts from fullrun_pn_xmm0413780101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri Mar 23 22:03:43 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 23 22:03:43 2012] Using photon index=1.80, rate=0.0036, arf fullrun_pn_xmm0413780101_pi300-10000_pass1_cl_src30.arf
[Fri Mar 23 22:03:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 23 22:03:43 2012] Updating source flux to 2.4e-14
[Fri Mar 23 22:04:34 2012] Source 30 has fewer than 100.000000 counts, skipping spectral fitting