[Fri Mar 23 10:30:05 2012] Detection parameters: Position = (341.1, 315.9) = 17 4 43.32 -22 5 12.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 114.7 +/- 14.9 Background counts = 17.7 Rate = 0.006 +/- 0.0008 [Fri Mar 23 10:30:06 2012] Off-axis axis estimate = 3.34' [Fri Mar 23 14:16:57 2012] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting [Fri Mar 23 14:16:57 2012] Initial guess for spatial extent in simple fitting = 8.10" [Fri Mar 23 14:16:57 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.717 [Fri Mar 23 14:16:57 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.10" [Fri Mar 23 16:02:02 2012] fullrun_mos2_xmm0413780101_pi300-10000_cl_pass0_src3.ximg exists [Fri Mar 23 16:02:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0413780101_pi300-10000_cl_pass0_src3.csv [Fri Mar 23 16:02:02 2012] fullrun_mos2_xmm0413780101_pi300-10000_cl_pass0_src3_1.ximg exists [Fri Mar 23 16:02:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0413780101_pi300-10000_cl_pass0_src3.csv [Fri Mar 23 16:02:02 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0413780101_pi300-10000_cl_pass0_src3_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0413780101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Mar 23 16:02:02 2012] fullrun_mos2_xmm0413780101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists [Fri Mar 23 16:02:02 2012] fullrun_mos2_xmm0413780101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists [Fri Mar 23 16:02:02 2012] Fit fullrun_mos2_xmm0413780101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly [Fri Mar 23 16:02:27 2012] Spatial fit model total counts = 759.214000, observed total counts = 754.000000 [Fri Mar 23 16:02:27 2012] Offset between fit and detection position for source 2 = 0.339973 pixels [Fri Mar 23 16:02:27 2012] 717.982200 total counts/ 704.016000 bgd. counts: snr = 0.526365 Spatial fit parameters: Offset between fit and detection position for source 2 = 0.339973 pixels Position = (341.3, 315.6) = 17 4 43.27 -22 5 12.1 Extent = 2.2 (2.0-4.2)", rotation angle = 0 Source counts = 14.0 +/- 26.8 Background counts = 704.0 Rate = 0.0006 +/- 0.001 Deleting source due to low Poisson probability