[Fri Mar 23 10:30:05 2012] Detection parameters: Position = (172.4, 306.8) = 17 5 36.13 -22 5 48.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 38.0 +/- 8.6 Background counts = 9.3 Rate = 0.003 +/- 0.0006 [Fri Mar 23 10:30:06 2012] Off-axis axis estimate = 9.16' [Fri Mar 23 14:16:57 2012] Using EEF radius (= 11.01 ")to estimate initial spatial extent for simple fitting [Fri Mar 23 14:16:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Fri Mar 23 14:16:57 2012] Initial guess for spatial extent in simple fitting = 11.01" [Fri Mar 23 14:16:57 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.980 [Fri Mar 23 14:16:57 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 11.01" [Fri Mar 23 16:02:02 2012] fullrun_mos2_xmm0413780101_pi300-10000_cl_pass0_src9.ximg exists [Fri Mar 23 16:02:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0413780101_pi300-10000_cl_pass0_src9.csv [Fri Mar 23 16:02:02 2012] fullrun_mos2_xmm0413780101_pi300-10000_cl_pass0_src9_1.ximg exists [Fri Mar 23 16:02:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0413780101_pi300-10000_cl_pass0_src9.csv [Fri Mar 23 16:02:02 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0413780101_pi300-10000_cl_pass0_src9_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0413780101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Mar 23 16:02:03 2012] fullrun_mos2_xmm0413780101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists [Fri Mar 23 16:02:03 2012] fullrun_mos2_xmm0413780101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists [Fri Mar 23 16:02:03 2012] Fit fullrun_mos2_xmm0413780101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly [Fri Mar 23 16:02:27 2012] Spatial fit model total counts = 134.998000, observed total counts = 135.000000 [Fri Mar 23 16:02:27 2012] Offset between fit and detection position for source 14 = 0.276845 pixels [Fri Mar 23 16:02:27 2012] 134.105700 total counts/ 114.674000 bgd. counts: snr = 1.814589 Spatial fit parameters: Offset between fit and detection position for source 14 = 0.276845 pixels Position = (172.4, 307.1) = 17 5 36.14 -22 5 49.1 Extent = 3.4 (2.8-5.6)", rotation angle = 0 Source counts = 19.4 +/- 11.6 Background counts = 114.7 Rate = 0.0008 +/- 0.0005 [Fri Mar 23 16:02:27 2012] Vigneting correction estimate = 1.000000 [Fri Mar 23 16:02:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Mar 23 16:02:27 2012] Assessing source extent using major axis lower bound [Fri Mar 23 16:02:27 2012] Source does appear to be extended [Fri Mar 23 16:02:27 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Mar 23 16:02:27 2012] Deleting source due to low Poisson probability 0.9