[Sat Nov 26 21:43:28 2011] Detection parameters:
  Position = (307.0, 319.1) = 17 0 58.32 -46 11 7.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 663.2 +/- 32.2
  Background counts = 17.9
  Rate = 0.03 +/- 0.001

[Sat Nov 26 21:43:28 2011] Off-axis axis estimate = 1.62'
[Sat Nov 26 22:06:31 2011] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 22:06:31 2011] Initial guess for spatial extent in simple fitting = 7.24"
[Sat Nov 26 22:06:31 2011] source mask rpix=1.7, npix_max = 18, mask sum = 14, frac = 0.747
[Sat Nov 26 22:06:31 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Sat Nov 26 22:19:59 2011] fullrun_mos1_xmm0413390201_pi300-10000_cl_pass0_src1.ximg exists
[Sat Nov 26 22:19:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0413390201_pi300-10000_cl_pass0_src1.csv
[Sat Nov 26 22:19:59 2011] fullrun_mos1_xmm0413390201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Nov 26 22:19:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0413390201_pi300-10000_cl_pass0_src1.csv
[Sat Nov 26 22:19:59 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0413390201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0413390201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 22:19:59 2011] fullrun_mos1_xmm0413390201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Nov 26 22:19:59 2011] fullrun_mos1_xmm0413390201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Nov 26 22:19:59 2011] Fit fullrun_mos1_xmm0413390201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Nov 26 22:36:02 2011] Spatial fit model total counts = 687.001000, observed total counts = 687.000000
[Sat Nov 26 22:36:02 2011] Offset between fit and detection position for source 1 = 0.835459 pixels
[Sat Nov 26 22:36:02 2011] 689.578000 total counts/ 290.534000 bgd. counts: snr = 23.411126
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.835459 pixels
  Position = (306.9, 319.9) = 17 0 58.37 -46 11 9.1
  Extent = 4.6 (4.1-5.0)", rotation angle = 0
  Source counts = 399.0 +/- 26.3
  Background counts = 290.5
  Rate = 0.01 +/- 0.001
[Sat Nov 26 22:36:02 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 22:36:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 22:36:02 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 22:36:02 2011] Source does appear to be extended
[Sat Nov 26 22:36:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 23:05:32 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Nov 26 23:05:32 2011] Initial guess for spatial extent in simple fitting = 4.61"
[Sat Nov 26 23:05:32 2011] source mask rpix=1.1, npix_max = 9, mask sum = 7, frac = 0.719
[Sat Nov 26 23:05:32 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.61"
[Sat Nov 26 23:21:27 2011] fullrun_mos1_xmm0413390201_pi300-10000_cl_pass1_src1.ximg exists
[Sat Nov 26 23:21:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0413390201_pi300-10000_cl_pass1_src1.csv
[Sat Nov 26 23:21:27 2011] fullrun_mos1_xmm0413390201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Nov 26 23:21:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0413390201_pi300-10000_cl_pass1_src1.csv
[Sat Nov 26 23:21:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0413390201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0413390201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 23:21:27 2011] fullrun_mos1_xmm0413390201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Nov 26 23:21:27 2011] fullrun_mos1_xmm0413390201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Nov 26 23:21:27 2011] Fit fullrun_mos1_xmm0413390201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Nov 26 23:37:36 2011] Spatial fit model total counts = 676.999000, observed total counts = 677.000000
[Sat Nov 26 23:37:36 2011] Offset between fit and detection position for source 1 = 0.007194 pixels
[Sat Nov 26 23:37:36 2011] 676.577000 total counts/ 275.648000 bgd. counts: snr = 24.148494
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.007194 pixels
  Position = (306.9, 319.9) = 17 0 58.37 -46 11 9.0
  Extent = 4.6 (4.1-5.1)", rotation angle = 0
  Source counts = 400.9 +/- 26.0
  Background counts = 275.6
  Rate = 0.01 +/- 0.001
[Sat Nov 26 23:37:36 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 23:37:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 23:37:36 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 23:37:36 2011] Source does appear to be extended
[Sat Nov 26 23:37:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 00:12:44 2011] XMMSAS src. selection expression = ellipse(26652.829580, 27782.652600, 278.266808, 278.266808, 0.000000, X, Y)
[Sun Nov 27 00:12:44 2011] Writing source region out to fullrun_mos1_xmm0413390201_pi300-10000_pass1_cl_src1_src.reg
[Sun Nov 27 00:12:44 2011] Extracting stamp from image fullrun_mos1_xmm0413390201_pi300-10000_cl_sm2.00.img.gz, (291, 304) - (323, 336)
[Sun Nov 27 00:12:44 2011] XMMSAS bgd. selection expression = annulus(26652.829580, 27782.652600, 463.778013, 927.556027, X, Y)
[Sun Nov 27 00:12:44 2011] Writing fullrun_mos1_xmm0413390201_pi300-10000_pass1_cl_src1.gif
[Sun Nov 27 00:12:49 2011] Mean detx,y = (245.43, -231.17) 
[Sun Nov 27 00:12:51 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Nov 27 00:13:03 2011] Binned source spectrum to 10 counts/bin
[Sun Nov 27 00:13:03 2011] Setting source spectrum file to fullrun_mos1_xmm0413390201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Nov 27 00:13:03 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0413390201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Nov 27 00:30:48 2011] Updating aperture counts using extracted products
[Sun Nov 27 00:30:48 2011] Error reading totcts from fullrun_mos1_xmm0413390201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Nov 27 00:30:49 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 00:30:49 2011] Using photon index=1.80, rate=0.0147, arf fullrun_mos1_xmm0413390201_pi300-10000_pass1_cl_src1.arf
[Sun Nov 27 00:30:49 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 00:30:49 2011] Updating source flux to 1.8e-13
[Sun Nov 27 00:31:08 2011] Reading fit data from xmm0413390201/analysis//spectral/fullrun_mos1_xmm0413390201_pi300-10000_pass1_cl_src1_pl.csv
[Sun Nov 27 00:31:08 2011] Spectral fit parameter nH value = 2.67401e+22
[Sun Nov 27 00:31:08 2011] Spectral fit parameter PhoIndex value = 4.67986
[Sun Nov 27 00:31:08 2011] Failed to get F(0.3-8.0) from xmm0413390201/analysis//spectral/fullrun_mos1_xmm0413390201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Nov 27 00:31:08 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 00:31:08 2011] Using Nh = 2.7e+22, photon index=4.68, rate=0.0147, arf fullrun_mos1_xmm0413390201_pi300-10000_pass1_cl_src1.arf
[Sun Nov 27 00:31:08 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 00:31:09 2011] Updating source flux to 1.8e-13