[Fri Aug  3 14:55:18 2012] Detection parameters:
  Position = (311.5, 318.1) = 17 0 58.54 -46 11 7.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 829.0 +/- 35.8
  Background counts = 32.5
  Rate = 0.03 +/- 0.001

[Fri Aug  3 14:55:18 2012] Off-axis axis estimate = 1.71'
[Fri Aug  3 15:09:11 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Fri Aug  3 15:09:11 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Fri Aug  3 15:09:11 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.058
[Fri Aug  3 15:09:11 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Fri Aug  3 15:15:03 2012] fullrun_mos1_xmm0413390101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Aug  3 15:15:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0413390101_pi300-10000_cl_pass0_src1.csv
[Fri Aug  3 15:15:03 2012] fullrun_mos1_xmm0413390101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Aug  3 15:15:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0413390101_pi300-10000_cl_pass0_src1.csv
[Fri Aug  3 15:15:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0413390101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0413390101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 15:15:03 2012] fullrun_mos1_xmm0413390101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug  3 15:15:03 2012] fullrun_mos1_xmm0413390101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug  3 15:15:03 2012] Fit fullrun_mos1_xmm0413390101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Aug  3 15:19:21 2012] Spatial fit model total counts = 982.925000, observed total counts = 990.000000
[Fri Aug  3 15:19:21 2012] Offset between fit and detection position for source 3 = 0.210151 pixels
[Fri Aug  3 15:19:21 2012] 983.189000 total counts/ 471.740000 bgd. counts: snr = 23.547835
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.210151 pixels
  Position = (311.3, 318.1) = 17 0 58.63 -46 11 7.5
  Extent = 5.1 (4.6-5.5)", rotation angle = 0
  Source counts = 511.4 +/- 31.4
  Background counts = 471.7
  Rate = 0.02 +/- 0.001
[Fri Aug  3 15:19:21 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 15:19:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 15:19:21 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 15:19:21 2012] Source does appear to be extended
[Fri Aug  3 15:19:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 15:29:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug  3 15:29:45 2012] Initial guess for spatial extent in simple fitting = 5.06"
[Fri Aug  3 15:29:45 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.086
[Fri Aug  3 15:29:45 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.06"
[Fri Aug  3 15:36:05 2012] fullrun_mos1_xmm0413390101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug  3 15:36:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0413390101_pi300-10000_cl_pass1_src1.csv
[Fri Aug  3 15:36:05 2012] fullrun_mos1_xmm0413390101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug  3 15:36:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0413390101_pi300-10000_cl_pass1_src1.csv
[Fri Aug  3 15:36:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0413390101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0413390101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 15:36:05 2012] fullrun_mos1_xmm0413390101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug  3 15:36:05 2012] fullrun_mos1_xmm0413390101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug  3 15:36:05 2012] Fit fullrun_mos1_xmm0413390101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Aug  3 15:39:27 2012] Spatial fit model total counts = 985.065000, observed total counts = 990.000000
[Fri Aug  3 15:39:27 2012] Offset between fit and detection position for source 3 = 0.000672 pixels
[Fri Aug  3 15:39:27 2012] 985.321000 total counts/ 470.297000 bgd. counts: snr = 23.748783
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000672 pixels
  Position = (311.3, 318.1) = 17 0 58.63 -46 11 7.5
  Extent = 5.1 (4.6-5.5)", rotation angle = 0
  Source counts = 515.0 +/- 31.4
  Background counts = 470.3
  Rate = 0.02 +/- 0.001
[Fri Aug  3 15:39:27 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 15:39:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 15:39:27 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 15:39:27 2012] Source does appear to be extended
[Fri Aug  3 15:39:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 15:53:31 2012] XMMSAS src. selection expression = ellipse(27031.633600, 27628.554000, 304.468209, 304.468209, 0.000000, X, Y)
[Fri Aug  3 15:53:31 2012] Writing source region out to fullrun_mos1_xmm0413390101_pi300-10000_pass1_cl_src3_src.reg
[Fri Aug  3 15:53:31 2012] Extracting stamp from image fullrun_mos1_xmm0413390101_pi300-10000_cl_sm2.00.img.gz, (294, 301) - (329, 336)
[Fri Aug  3 15:53:31 2012] XMMSAS bgd. selection expression = annulus(27031.633600, 27628.554000, 507.447015, 1014.894029, X, Y)
[Fri Aug  3 15:53:31 2012] Writing fullrun_mos1_xmm0413390101_pi300-10000_pass1_cl_src3.gif
[Fri Aug  3 15:53:33 2012] Mean detx,y = (305.47, -268.22) 
[Fri Aug  3 15:53:34 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug  3 15:53:40 2012] Binned source spectrum to 10 counts/bin
[Fri Aug  3 15:53:40 2012] Setting source spectrum file to fullrun_mos1_xmm0413390101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Aug  3 15:53:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0413390101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Aug  3 16:03:48 2012] Updating aperture counts using extracted products
[Fri Aug  3 16:03:48 2012] Error reading totcts from fullrun_mos1_xmm0413390101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Aug  3 16:03:48 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug  3 16:03:48 2012] Using photon index=1.80, rate=0.0184, arf fullrun_mos1_xmm0413390101_pi300-10000_pass1_cl_src3.arf
[Fri Aug  3 16:03:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  3 16:03:48 2012] Updating source flux to 2.2e-13
[Fri Aug  3 16:03:59 2012] Reading fit data from xmm0413390101/analysis//spectral/fullrun_mos1_xmm0413390101_pi300-10000_pass1_cl_src3_pl.csv
[Fri Aug  3 16:03:59 2012] Spectral fit parameter nH value = 3.27497e+22
[Fri Aug  3 16:03:59 2012] Spectral fit parameter PhoIndex value = 5.7042
[Fri Aug  3 16:03:59 2012] Failed to get F(0.3-8.0) from xmm0413390101/analysis//spectral/fullrun_mos1_xmm0413390101_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Fri Aug  3 16:03:59 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug  3 16:03:59 2012] Using Nh = 3.3e+22, photon index=5.70, rate=0.0184, arf fullrun_mos1_xmm0413390101_pi300-10000_pass1_cl_src3.arf
[Fri Aug  3 16:03:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  3 16:03:59 2012] Updating source flux to 2e-13