[Fri Jun 15 05:57:25 2012] Detection parameters:
  Position = (393.8, 385.4) = 12 56 31.51 47 43 26.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.5 +/- 13.7
  Background counts = 37.5
  Rate = 0.005 +/- 0.001

[Fri Jun 15 05:57:25 2012] Off-axis axis estimate = 9.36'
[Fri Jun 15 06:17:44 2012] Using EEF radius (= 11.11 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 06:17:44 2012] Initial guess for spatial extent in simple fitting = 11.11"
[Fri Jun 15 06:17:44 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.965
[Fri Jun 15 06:17:44 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 11.11"
[Fri Jun 15 06:29:57 2012] fullrun_mos2_xmm0413380601_pi300-10000_cl_pass0_src9.ximg exists
[Fri Jun 15 06:29:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0413380601_pi300-10000_cl_pass0_src9.csv
[Fri Jun 15 06:29:57 2012] fullrun_mos2_xmm0413380601_pi300-10000_cl_pass0_src9_1.ximg exists
[Fri Jun 15 06:29:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0413380601_pi300-10000_cl_pass0_src9.csv
[Fri Jun 15 06:29:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0413380601_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0413380601_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 06:29:58 2012] fullrun_mos2_xmm0413380601_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Fri Jun 15 06:29:58 2012] fullrun_mos2_xmm0413380601_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Jun 15 06:29:58 2012] Fit fullrun_mos2_xmm0413380601_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Jun 15 06:30:04 2012] Spatial fit model total counts = 150.427000, observed total counts = 150.000000
[Fri Jun 15 06:30:04 2012] Offset between fit and detection position for source 3 = 0.434387 pixels
[Fri Jun 15 06:30:04 2012] 149.803100 total counts/ 116.018000 bgd. counts: snr = 3.136624
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.434387 pixels
  Position = (393.4, 385.6) = 12 56 31.69 47 43 28.0
  Extent = 5.6 (3.9-9.7)", rotation angle = 0
  Source counts = 33.8 +/- 12.2
  Background counts = 116.0
  Rate = 0.002 +/- 0.0007
[Fri Jun 15 06:30:04 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 06:30:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 06:30:04 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 06:30:04 2012] Source does appear to be extended
[Fri Jun 15 06:30:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 06:50:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 06:50:03 2012] Initial guess for spatial extent in simple fitting = 5.62"
[Fri Jun 15 06:50:03 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.700
[Fri Jun 15 06:50:03 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 5.62"
[Fri Jun 15 07:02:17 2012] fullrun_mos2_xmm0413380601_pi300-10000_cl_pass1_src9.ximg exists
[Fri Jun 15 07:02:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0413380601_pi300-10000_cl_pass1_src9.csv
[Fri Jun 15 07:02:17 2012] fullrun_mos2_xmm0413380601_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri Jun 15 07:02:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0413380601_pi300-10000_cl_pass1_src9.csv
[Fri Jun 15 07:02:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0413380601_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0413380601_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 07:02:17 2012] fullrun_mos2_xmm0413380601_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri Jun 15 07:02:17 2012] fullrun_mos2_xmm0413380601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Jun 15 07:02:17 2012] Fit fullrun_mos2_xmm0413380601_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Fri Jun 15 07:02:23 2012] Spatial fit model total counts = 150.954000, observed total counts = 151.000000
[Fri Jun 15 07:02:23 2012] Offset between fit and detection position for source 3 = 0.057730 pixels
[Fri Jun 15 07:02:23 2012] 150.917900 total counts/ 115.414000 bgd. counts: snr = 3.304812
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.057730 pixels
  Position = (393.4, 385.7) = 12 56 31.70 47 43 28.2
  Extent = 5.9 (3.9-9.5)", rotation angle = 0
  Source counts = 35.5 +/- 12.3
  Background counts = 115.4
  Rate = 0.002 +/- 0.0007
[Fri Jun 15 07:02:23 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 07:02:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 07:02:23 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 07:02:23 2012] Source does appear to be extended
[Fri Jun 15 07:02:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 07:23:56 2012] XMMSAS src. selection expression = ellipse(34177.103600, 33503.441000, 355.601410, 355.601410, 0.000000, X, Y)
[Fri Jun 15 07:23:56 2012] Writing source region out to fullrun_mos2_xmm0413380601_pi300-10000_pass1_cl_src3_src.reg
[Fri Jun 15 07:23:56 2012] Extracting stamp from image fullrun_mos2_xmm0413380601_pi300-10000_cl_sm2.00.img.gz, (373, 365) - (414, 406)
[Fri Jun 15 07:23:56 2012] XMMSAS bgd. selection expression = annulus(34177.103600, 33503.441000, 592.669017, 1185.338034, X, Y)
[Fri Jun 15 07:23:56 2012] Writing fullrun_mos2_xmm0413380601_pi300-10000_pass1_cl_src3.gif
[Fri Jun 15 07:25:34 2012] Mean detx,y = (-9984.16, -841.05) 
[Fri Jun 15 07:25:34 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 07:25:39 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 07:25:39 2012] Setting source spectrum file to fullrun_mos2_xmm0413380601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun 15 07:25:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0413380601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jun 15 07:30:04 2012] Not generating rmf since there are only 35 counts
[Fri Jun 15 07:30:04 2012] rmf not generated due to insufficient counts
[Fri Jun 15 07:31:48 2012] Updating aperture counts using extracted products
[Fri Jun 15 07:31:48 2012] Error reading totcts from fullrun_mos2_xmm0413380601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun 15 07:31:49 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 07:31:49 2012] Using photon index=1.80, rate=0.00205, arf fullrun_mos2_xmm0413380601_pi300-10000_pass1_cl_src3.arf
[Fri Jun 15 07:31:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 07:31:49 2012] Updating source flux to 3.8e-14
[Fri Jun 15 07:31:51 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting