[Fri Jun 15 05:57:25 2012] Detection parameters:
  Position = (276.5, 199.8) = 12 57 22.07 47 30 1.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122.7 +/- 14.8
  Background counts = 37.0
  Rate = 0.005 +/- 0.0007

[Fri Jun 15 05:57:25 2012] Off-axis axis estimate = 7.33'
[Fri Jun 15 06:17:44 2012] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 06:17:44 2012] Initial guess for spatial extent in simple fitting = 10.09"
[Fri Jun 15 06:17:44 2012] source mask rpix=2.3, npix_max = 31, mask sum = 23, frac = 0.723
[Fri Jun 15 06:17:44 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 10.09"
[Fri Jun 15 06:29:57 2012] fullrun_mos2_xmm0413380601_pi300-10000_cl_pass0_src8.ximg exists
[Fri Jun 15 06:29:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0413380601_pi300-10000_cl_pass0_src8.csv
[Fri Jun 15 06:29:57 2012] fullrun_mos2_xmm0413380601_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri Jun 15 06:29:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0413380601_pi300-10000_cl_pass0_src8.csv
[Fri Jun 15 06:29:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0413380601_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0413380601_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 06:29:58 2012] fullrun_mos2_xmm0413380601_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri Jun 15 06:29:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0413380601_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri Jun 15 06:29:58 2012] fullrun_mos2_xmm0413380601_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri Jun 15 06:29:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0413380601_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri Jun 15 06:29:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0413380601_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0413380601_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 06:30:04 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 12.896910 pixels away
[Fri Jun 15 06:30:04 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 06:30:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 06:30:04 2012] Assessing source extent using major
[Fri Jun 15 06:30:04 2012] Source does appear to be extended
[Fri Jun 15 06:30:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 06:50:03 2012] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 06:50:03 2012] Initial guess for spatial extent in simple fitting = 10.09"
[Fri Jun 15 06:50:03 2012] source mask rpix=2.3, npix_max = 31, mask sum = 23, frac = 0.723
[Fri Jun 15 06:50:03 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 10.09"
[Fri Jun 15 07:02:17 2012] fullrun_mos2_xmm0413380601_pi300-10000_cl_pass1_src8.ximg exists
[Fri Jun 15 07:02:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0413380601_pi300-10000_cl_pass1_src8.csv
[Fri Jun 15 07:02:17 2012] fullrun_mos2_xmm0413380601_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri Jun 15 07:02:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0413380601_pi300-10000_cl_pass1_src8.csv
[Fri Jun 15 07:02:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0413380601_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0413380601_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 07:02:17 2012] fullrun_mos2_xmm0413380601_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri Jun 15 07:02:17 2012] fullrun_mos2_xmm0413380601_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Jun 15 07:02:17 2012] Fit fullrun_mos2_xmm0413380601_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Fri Jun 15 07:02:23 2012] Spatial fit model total counts = 239.258000, observed total counts = 221.000000
[Fri Jun 15 07:02:23 2012] Offset between fit and detection position for source 1 = 0.159266 pixels
[Fri Jun 15 07:02:23 2012] 243.814800 total counts/ 182.454000 bgd. counts: snr = 4.542703
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.159266 pixels
  Position = (276.6, 199.9) = 12 57 22.03 47 30 0.7
  Extent = 4.0 (2.9-5.6)", rotation angle = 0
  Source counts = 61.4 +/- 15.6
  Background counts = 182.5
  Rate = 0.004 +/- 0.0009
[Fri Jun 15 07:02:23 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 07:02:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 07:02:23 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 07:02:23 2012] Source does appear to be extended
[Fri Jun 15 07:02:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 07:23:56 2012] XMMSAS src. selection expression = ellipse(24011.618400, 17344.681820, 238.090207, 238.090207, 0.000000, X, Y)
[Fri Jun 15 07:23:56 2012] Writing source region out to fullrun_mos2_xmm0413380601_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 15 07:23:56 2012] Extracting stamp from image fullrun_mos2_xmm0413380601_pi300-10000_cl_sm2.00.img.gz, (263, 186) - (290, 214)
[Fri Jun 15 07:23:56 2012] XMMSAS bgd. selection expression = annulus(24011.618400, 17344.681820, 396.817011, 793.634023, X, Y)
[Fri Jun 15 07:23:56 2012] Writing fullrun_mos2_xmm0413380601_pi300-10000_pass1_cl_src1.gif
[Fri Jun 15 07:25:25 2012] Mean detx,y = (8022.55, -7151.81) 
[Fri Jun 15 07:25:25 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 07:25:32 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 07:25:32 2012] Setting source spectrum file to fullrun_mos2_xmm0413380601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 15 07:25:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0413380601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun 15 07:29:58 2012] Not generating rmf since there are only 61 counts
[Fri Jun 15 07:29:58 2012] rmf not generated due to insufficient counts
[Fri Jun 15 07:31:48 2012] Updating aperture counts using extracted products
[Fri Jun 15 07:31:48 2012] Error reading totcts from fullrun_mos2_xmm0413380601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 15 07:31:49 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 07:31:49 2012] Using photon index=1.80, rate=0.00354, arf fullrun_mos2_xmm0413380601_pi300-10000_pass1_cl_src1.arf
[Fri Jun 15 07:31:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 07:31:49 2012] Updating source flux to 1.4e-13
[Fri Jun 15 07:31:51 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting