[Sat Feb 18 10:53:31 2012] Detection parameters:
  Position = (322.9, 302.8) = 12 57 2.05 47 37 29.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 289.3 +/- 26.5
  Background counts = 132.8
  Rate = 0.007 +/- 0.0007

[Sat Feb 18 10:53:32 2012] Off-axis axis estimate = 1.80'
[Sat Feb 18 10:58:47 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 10:58:47 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Sat Feb 18 10:58:47 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.838
[Sat Feb 18 10:58:47 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 7.33"
[Sat Feb 18 11:50:19 2012] fullrun_pn_xmm0413380501_pi300-10000_cl_pass0_src19.ximg exists
[Sat Feb 18 11:50:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0413380501_pi300-10000_cl_pass0_src19.csv
[Sat Feb 18 11:50:19 2012] fullrun_pn_xmm0413380501_pi300-10000_cl_pass0_src19_1.ximg exists
[Sat Feb 18 11:50:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0413380501_pi300-10000_cl_pass0_src19.csv
[Sat Feb 18 11:50:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0413380501_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0413380501_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 11:50:20 2012] fullrun_pn_xmm0413380501_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sat Feb 18 11:50:20 2012] fullrun_pn_xmm0413380501_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sat Feb 18 11:50:20 2012] Fit fullrun_pn_xmm0413380501_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sat Feb 18 12:48:28 2012] Source 19 is offset by 5.312832 and -6.945593 pixels which is larger than
2 X fitted extent = 0.842395 x 0.842395, not incorporating fit results
[Sat Feb 18 12:48:28 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 12:48:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 12:48:28 2012] Assessing source extent using major
[Sat Feb 18 12:48:28 2012] Source does appear to be extended
[Sat Feb 18 12:48:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 12:48:44 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 12:48:44 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Sat Feb 18 12:48:44 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.838
[Sat Feb 18 12:48:44 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 7.33"
[Sat Feb 18 13:43:31 2012] fullrun_pn_xmm0413380501_pi300-10000_cl_pass1_src19.ximg exists
[Sat Feb 18 13:43:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0413380501_pi300-10000_cl_pass1_src19.csv
[Sat Feb 18 13:43:31 2012] fullrun_pn_xmm0413380501_pi300-10000_cl_pass1_src19_1.ximg exists
[Sat Feb 18 13:43:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0413380501_pi300-10000_cl_pass1_src19.csv
[Sat Feb 18 13:43:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0413380501_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0413380501_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 13:43:31 2012] fullrun_pn_xmm0413380501_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sat Feb 18 13:43:31 2012] fullrun_pn_xmm0413380501_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sat Feb 18 13:43:31 2012] Fit fullrun_pn_xmm0413380501_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sat Feb 18 14:38:25 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 40.377697 pixels away
[Sat Feb 18 14:38:25 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 27.111361 pixels away
[Sat Feb 18 14:38:25 2012] Spatial fit model total counts = 926.674000, observed total counts = 925.000000
[Sat Feb 18 14:38:25 2012] Offset between fit and detection position for source 19 = 0.151131 pixels
[Sat Feb 18 14:38:25 2012] 939.113000 total counts/ 810.011000 bgd. counts: snr = 4.536151
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.151131 pixels
  Position = (322.8, 302.7) = 12 57 2.07 47 37 28.5
  Extent = 4.1 (3.4-4.9)", rotation angle = 0
  Source counts = 129.1 +/- 30.6
  Background counts = 810.0
  Rate = 0.005 +/- 0.001
[Sat Feb 18 14:38:25 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 14:38:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 14:38:25 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 14:38:25 2012] Source does appear to be extended
[Sat Feb 18 14:38:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 14:38:42 2012] XMMSAS src. selection expression = ellipse(28038.266400, 26282.154600, 248.431807, 248.431807, 0.000000, X, Y)
[Sat Feb 18 14:38:42 2012] Writing source region out to fullrun_pn_xmm0413380501_pi300-10000_pass1_cl_src19_src.reg
[Sat Feb 18 14:38:42 2012] Extracting stamp from image fullrun_pn_xmm0413380501_pi300-10000_cl_sm2.00.img.gz, (309, 288) - (337, 317)
[Sat Feb 18 14:38:42 2012] XMMSAS bgd. selection expression = annulus(28038.266400, 26282.154600, 414.053012, 828.106024, X, Y) && !ellipse(27547.691080, 27196.563600, 420.840012, 420.840012, 0.000000, X, Y) && !ellipse(26344.134600, 27003.014400, 1105.808032, 1105.808032, 0.000000, X, Y)
[Sat Feb 18 14:38:42 2012] Writing fullrun_pn_xmm0413380501_pi300-10000_pass1_cl_src19.gif
[Sat Feb 18 14:57:20 2012] Mean detx,y = (798.27, 2547.41) 
[Sat Feb 18 14:57:25 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 18 14:57:44 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 18 14:57:45 2012] Setting source spectrum file to fullrun_pn_xmm0413380501_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sat Feb 18 14:57:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0413380501_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sat Feb 18 16:48:09 2012] Updating aperture counts using extracted products
[Sat Feb 18 16:48:09 2012] Error reading totcts from fullrun_pn_xmm0413380501_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sat Feb 18 16:48:09 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 18 16:48:09 2012] Using photon index=1.80, rate=0.00455, arf fullrun_pn_xmm0413380501_pi300-10000_pass1_cl_src19.arf
[Sat Feb 18 16:48:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 18 16:48:09 2012] Updating source flux to 1.6e-14
[Sat Feb 18 16:48:52 2012] Flag b found in src. 19 procflags, skipping spectral fitting