[Sat Feb 18 10:53:58 2012] Detection parameters:
  Position = (194.4, 258.0) = 12 57 57.28 47 34 12.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.2 +/- 16.0
  Background counts = 75.4
  Rate = 0.002 +/- 0.0003

[Sat Feb 18 10:53:59 2012] Off-axis axis estimate = 8.09'
[Sat Feb 18 11:50:20 2012] Using EEF radius (= 10.47 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 11:50:20 2012] Initial guess for spatial extent in simple fitting = 10.47"
[Sat Feb 18 11:50:20 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.887
[Sat Feb 18 11:50:20 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 10.47"
[Sat Feb 18 12:14:51 2012] fullrun_mos1_xmm0413380501_pi300-10000_cl_pass0_src18.ximg exists
[Sat Feb 18 12:14:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0413380501_pi300-10000_cl_pass0_src18.csv
[Sat Feb 18 12:14:51 2012] fullrun_mos1_xmm0413380501_pi300-10000_cl_pass0_src18_1.ximg exists
[Sat Feb 18 12:14:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0413380501_pi300-10000_cl_pass0_src18.csv
[Sat Feb 18 12:14:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0413380501_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0413380501_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 12:14:51 2012] fullrun_mos1_xmm0413380501_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sat Feb 18 12:14:51 2012] fullrun_mos1_xmm0413380501_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sat Feb 18 12:14:51 2012] Fit fullrun_mos1_xmm0413380501_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Sat Feb 18 12:48:27 2012] Warning, spatial fit 12 centroid is now closest to src. 11
[Sat Feb 18 12:48:31 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 14.570574 pixels away
[Sat Feb 18 12:48:31 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 12:48:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 12:48:31 2012] Assessing source extent using major
[Sat Feb 18 12:48:31 2012] Source does appear to be extended
[Sat Feb 18 12:48:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 13:43:31 2012] Using EEF radius (= 10.47 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 13:43:31 2012] Initial guess for spatial extent in simple fitting = 10.47"
[Sat Feb 18 13:43:31 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.887
[Sat Feb 18 13:43:31 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 10.47"
[Sat Feb 18 14:06:43 2012] fullrun_mos1_xmm0413380501_pi300-10000_cl_pass1_src18.ximg exists
[Sat Feb 18 14:06:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0413380501_pi300-10000_cl_pass1_src18.csv
[Sat Feb 18 14:06:43 2012] fullrun_mos1_xmm0413380501_pi300-10000_cl_pass1_src18_1.ximg exists
[Sat Feb 18 14:06:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0413380501_pi300-10000_cl_pass1_src18.csv
[Sat Feb 18 14:06:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0413380501_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0413380501_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 14:06:43 2012] fullrun_mos1_xmm0413380501_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sat Feb 18 14:06:43 2012] fullrun_mos1_xmm0413380501_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sat Feb 18 14:06:43 2012] Fit fullrun_mos1_xmm0413380501_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Sat Feb 18 14:38:25 2012] Warning, spatial fit 31 centroid is now closest to src. 30
[Sat Feb 18 14:38:28 2012] Spatial fit model total counts = 319.200000, observed total counts = 320.000000
[Sat Feb 18 14:38:28 2012] Offset between fit and detection position for source 16 = 0.374687 pixels
[Sat Feb 18 14:38:28 2012] 310.992900 total counts/ 270.613000 bgd. counts: snr = 2.454658
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.374687 pixels
  Position = (194.1, 258.1) = 12 57 57.44 47 34 14.3
  Extent = 5.9 (3.3-9.5)", rotation angle = 0
  Source counts = 40.4 +/- 17.6
  Background counts = 270.6
  Rate = 0.001 +/- 0.0005
[Sat Feb 18 14:38:28 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 14:38:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 14:38:28 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 14:38:28 2012] Source does appear to be extended
[Sat Feb 18 14:38:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 16:04:31 2012] XMMSAS src. selection expression = ellipse(16834.351340, 22408.671600, 351.174610, 351.174610, 0.000000, X, Y)
[Sat Feb 18 16:04:31 2012] Writing source region out to fullrun_mos1_xmm0413380501_pi300-10000_pass1_cl_src16_src.reg
[Sat Feb 18 16:04:31 2012] Extracting stamp from image fullrun_mos1_xmm0413380501_pi300-10000_cl_sm2.00.img.gz, (174, 238) - (214, 278)
[Sat Feb 18 16:04:31 2012] XMMSAS bgd. selection expression = annulus(16834.351340, 22408.671600, 585.291017, 1170.582034, X, Y)
[Sat Feb 18 16:04:31 2012] Writing fullrun_mos1_xmm0413380501_pi300-10000_pass1_cl_src16.gif
[Sat Feb 18 16:09:46 2012] Mean detx,y = (1679.49, -10619.42) 
[Sat Feb 18 16:09:47 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 18 16:09:54 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 18 16:09:54 2012] Setting source spectrum file to fullrun_mos1_xmm0413380501_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat Feb 18 16:09:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0413380501_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sat Feb 18 16:22:16 2012] Not generating rmf since there are only 40 counts
[Sat Feb 18 16:22:16 2012] rmf not generated due to insufficient counts
[Sat Feb 18 16:48:10 2012] Updating aperture counts using extracted products
[Sat Feb 18 16:48:10 2012] Error reading totcts from fullrun_mos1_xmm0413380501_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat Feb 18 16:48:10 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 18 16:48:10 2012] Using photon index=1.80, rate=0.0011, arf fullrun_mos1_xmm0413380501_pi300-10000_pass1_cl_src16.arf
[Sat Feb 18 16:48:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 18 16:48:10 2012] Updating source flux to 2.5e-14
[Sat Feb 18 16:48:12 2012] Source 16 has fewer than 100.000000 counts, skipping spectral fitting