[Thu Mar 29 09:34:45 2012] Detection parameters:
  Position = (393.6, 415.9) = 5 38 46.66 -69 9 44.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.1 +/- 11.5
  Background counts = 14.5
  Rate = 0.003 +/- 0.0007

[Thu Mar 29 09:34:46 2012] Off-axis axis estimate = 10.96'
[Thu Mar 29 11:32:55 2012] Using EEF radius (= 11.91 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 11:32:55 2012] Initial guess for spatial extent in simple fitting = 11.91"
[Thu Mar 29 11:32:55 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.001
[Thu Mar 29 11:32:55 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 11.91"
[Thu Mar 29 14:07:20 2012] fullrun_mos2_xmm0413180301_pi300-10000_cl_pass0_src17.ximg exists
[Thu Mar 29 14:07:20 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0413180301_pi300-10000_cl_pass0_src17.csv
[Thu Mar 29 14:07:20 2012] fullrun_mos2_xmm0413180301_pi300-10000_cl_pass0_src17_1.ximg exists
[Thu Mar 29 14:07:20 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0413180301_pi300-10000_cl_pass0_src17.csv
[Thu Mar 29 14:07:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0413180301_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0413180301_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 14:07:21 2012] fullrun_mos2_xmm0413180301_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Thu Mar 29 14:07:21 2012] fullrun_mos2_xmm0413180301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Thu Mar 29 14:07:21 2012] Fit fullrun_mos2_xmm0413180301_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Thu Mar 29 14:07:38 2012] Source 10 is offset by -1.501687 and 2.112881 pixels which is larger than
2 X fitted extent = 1.429986 x 1.429986, not incorporating fit results
[Thu Mar 29 14:07:38 2012] Warning, spatial fit 17 centroid is now closest to src. 13
[Thu Mar 29 14:07:38 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 14:07:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 14:07:38 2012] Assessing source extent using major
[Thu Mar 29 14:07:38 2012] Source does appear to be extended
[Thu Mar 29 14:07:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 14:07:38 2012] Source is confused with source 6
[Thu Mar 29 15:43:03 2012] Using EEF radius (= 11.91 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 15:43:03 2012] Initial guess for spatial extent in simple fitting = 11.91"
[Thu Mar 29 15:43:03 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.001
[Thu Mar 29 15:43:03 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 11.91"
[Thu Mar 29 18:07:05 2012] fullrun_mos2_xmm0413180301_pi300-10000_cl_pass1_src17.ximg exists
[Thu Mar 29 18:07:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0413180301_pi300-10000_cl_pass1_src17.csv
[Thu Mar 29 18:07:05 2012] fullrun_mos2_xmm0413180301_pi300-10000_cl_pass1_src17_1.ximg exists
[Thu Mar 29 18:07:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0413180301_pi300-10000_cl_pass1_src17.csv
[Thu Mar 29 18:07:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0413180301_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0413180301_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 18:07:05 2012] fullrun_mos2_xmm0413180301_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Thu Mar 29 18:07:05 2012] fullrun_mos2_xmm0413180301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Thu Mar 29 18:07:05 2012] Fit fullrun_mos2_xmm0413180301_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Thu Mar 29 18:07:22 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 14.999526 pixels away
[Thu Mar 29 18:07:22 2012] Spatial fit model total counts = 1270.440000, observed total counts = 1222.000000
[Thu Mar 29 18:07:22 2012] Offset between fit and detection position for source 10 = 0.406488 pixels
[Thu Mar 29 18:07:22 2012] Warning, changing simple spatial fit ID from 17 to 23
[Thu Mar 29 18:07:22 2012] 1252.629000 total counts/ 233.649000 bgd. counts: snr = 66.662822
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.406488 pixels
  Position = (393.4, 415.6) = 5 38 46.86 -69 9 48.9
  Extent = 48.2 (48.1-48.2)", rotation angle = 0
  Source counts = 1019.0 +/- 35.4
  Background counts = 233.6
  Rate = 0.06 +/- 0.002
[Thu Mar 29 18:07:22 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 18:07:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 18:07:22 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 18:07:22 2012] Source does appear to be extended
[Thu Mar 29 18:07:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 18:33:27 2012] Counts = 1018.980000, rescaling region sizes by 2.000000
[Thu Mar 29 18:33:27 2012] XMMSAS src. selection expression = ellipse(34176.336000, 36109.490000, 5784.168166, 5784.168166, 0.000000, X, Y)
[Thu Mar 29 18:33:27 2012] Writing source region out to fullrun_mos2_xmm0413180301_pi300-10000_pass1_cl_src10_src.reg
[Thu Mar 29 18:33:27 2012] Extracting stamp from image fullrun_mos2_xmm0413180301_pi300-10000_cl_sm2.00.img.gz, (61, 83) - (595, 595)
[Thu Mar 29 18:33:27 2012] XMMSAS bgd. selection expression = annulus(34176.336000, 36109.490000, 19280.560555, 38561.121110, X, Y) && !ellipse(37342.543091, 19543.253235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26358.713440, 7443.944221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33440.769000, 36423.540000, 2355.440068, 2355.440068, 0.000000, X, Y) && !ellipse(28233.121200, 8110.918000, 840.616024, 840.616024, 0.000000, X, Y) && !ellipse(27207.045746, 7940.240219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33275.005800, 36633.614320, 1393.816040, 237.237607, 20.287000, X, Y) && !ellipse(34634.696460, 35581.252200, 1890.208054, 1890.208054, 0.000000, X, Y) && !ellipse(28146.272980, 9283.724205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10213.615040, 23475.329000, 393.012011, 393.012011, 0.000000, X, Y) && !ellipse(24365.622772, 7685.501442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33438.516327, 37202.885895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24201.427795, 8732.274620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23552.145691, 7443.561897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22269.693800, 10397.647800, 507.903215, 507.903215, 0.000000, X, Y) && !ellipse(26019.060852, 9758.788597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19508.910431, 18681.187790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26099.281600, 8835.220200, 997.184029, 997.184029, 0.000000, X, Y) && !ellipse(27105.468380, 9753.687400, 549.889616, 549.889616, 0.000000, X, Y) && !ellipse(33331.685800, 35812.050200, 1177.856034, 1177.856034, 0.000000, X, Y) && !ellipse(33750.367400, 38305.058800, 1287.080037, 1287.080037, 0.000000, X, Y) && !ellipse(34485.030000, 36416.898000, 1929.296056, 1929.296056, 0.000000, X, Y) && !ellipse(30975.135010, 8900.293503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21311.089800, 8681.361400, 1357.504039, 549.489616, 357.662790, X, Y)
[Thu Mar 29 18:33:27 2012] Writing fullrun_mos2_xmm0413180301_pi300-10000_pass1_cl_src10.gif
[Thu Mar 29 18:41:06 2012] Mean detx,y = (10526.39, -9113.62) 
[Thu Mar 29 18:41:09 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 29 18:52:03 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 29 18:52:03 2012] Setting source spectrum file to fullrun_mos2_xmm0413180301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Mar 29 18:52:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0413180301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu Mar 29 19:33:08 2012] Updating aperture counts using extracted products
[Thu Mar 29 19:33:08 2012] Error reading totcts from fullrun_mos2_xmm0413180301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Mar 29 19:33:09 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 29 19:33:09 2012] Using photon index=1.80, rate=0.0639, arf fullrun_mos2_xmm0413180301_pi300-10000_pass1_cl_src10.arf
[Thu Mar 29 19:33:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 29 19:33:09 2012] Updating source flux to 1.4e-12
[Thu Mar 29 19:34:41 2012] Flag b found in src. 10 procflags, skipping spectral fitting
[Thu Mar 29 19:34:41 2012] Flag c found in src. 10 procflags, skipping spectral fitting