[Fri Nov 25 08:14:45 2011] Detection parameters:
  Position = (396.9, 423.7) = 5 38 44.04 -69 9 12.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.5 +/- 10.8
  Background counts = 12.1
  Rate = 0.004 +/- 0.0008

[Fri Nov 25 08:14:46 2011] Off-axis axis estimate = 11.55'
[Fri Nov 25 08:15:52 2011] Using EEF radius (= 12.21 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 08:15:52 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Nov 25 08:15:52 2011] Initial guess for spatial extent in simple fitting = 12.21"
[Fri Nov 25 08:15:52 2011] source mask rpix=2.8, npix_max = 43, mask sum = 41, frac = 0.938
[Fri Nov 25 08:15:52 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 12.21"
[Fri Nov 25 09:15:46 2011] fullrun_mos1_xmm0413180201_pi300-10000_cl_pass0_src5.ximg exists
[Fri Nov 25 09:15:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0413180201_pi300-10000_cl_pass0_src5.csv
[Fri Nov 25 09:15:46 2011] fullrun_mos1_xmm0413180201_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Nov 25 09:15:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0413180201_pi300-10000_cl_pass0_src5.csv
[Fri Nov 25 09:15:46 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0413180201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0413180201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 09:15:46 2011] fullrun_mos1_xmm0413180201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Nov 25 09:15:46 2011] fullrun_mos1_xmm0413180201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Nov 25 09:15:46 2011] Fit fullrun_mos1_xmm0413180201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Nov 25 11:23:11 2011] Source 5 is offset by -3.829668 and 0.944166 pixels which is larger than
2 X fitted extent = 1.345338 x 1.345338, not incorporating fit results
[Fri Nov 25 11:23:11 2011] Spatial fit model total counts = 328.444000, observed total counts = 327.000000
[Fri Nov 25 11:23:11 2011] Offset between fit and detection position for source 5 = 0.784073 pixels
[Fri Nov 25 11:23:11 2011] 296.174800 total counts/ 274.929000 bgd. counts: snr = 1.281335
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.784073 pixels
  Position = (396.2, 423.6) = 5 38 44.68 -69 9 13.4
  Extent = 7.2 (3.1-12.6)", rotation angle = 0
  Source counts = 21.2 +/- 17.2
  Background counts = 274.9
  Rate = 0.002 +/- 0.001
  Deleting source due to low Poisson probability