[Fri Nov 25 08:14:45 2011] Detection parameters:
  Position = (430.0, 226.2) = 5 38 15.91 -69 23 31.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1107.2 +/- 38.0
  Background counts = 9.2
  Rate = 0.08 +/- 0.003

[Fri Nov 25 08:14:46 2011] Off-axis axis estimate = 10.88'
[Fri Nov 25 08:15:52 2011] Using EEF radius (= 11.87 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 08:15:52 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Nov 25 08:15:52 2011] Initial guess for spatial extent in simple fitting = 11.87"
[Fri Nov 25 08:15:52 2011] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.863
[Fri Nov 25 08:15:52 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 11.87"
[Fri Nov 25 09:15:46 2011] fullrun_mos1_xmm0413180201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Nov 25 09:15:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0413180201_pi300-10000_cl_pass0_src1.csv
[Fri Nov 25 09:15:46 2011] fullrun_mos1_xmm0413180201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Nov 25 09:15:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0413180201_pi300-10000_cl_pass0_src1.csv
[Fri Nov 25 09:15:46 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0413180201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0413180201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 09:15:46 2011] fullrun_mos1_xmm0413180201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Nov 25 09:15:46 2011] fullrun_mos1_xmm0413180201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Nov 25 09:15:46 2011] Fit fullrun_mos1_xmm0413180201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Nov 25 11:23:11 2011] Spatial fit model total counts = 1206.570000, observed total counts = 1208.000000
[Fri Nov 25 11:23:11 2011] Offset between fit and detection position for source 1 = 0.321270 pixels
[Fri Nov 25 11:23:11 2011] 1198.161000 total counts/ 360.617000 bgd. counts: snr = 44.104666
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.321270 pixels
  Position = (429.7, 226.3) = 5 38 16.14 -69 23 30.7
  Extent = 6.6 (6.2-7.0)", rotation angle = 0
  Source counts = 837.5 +/- 34.6
  Background counts = 360.6
  Rate = 0.06 +/- 0.003
[Fri Nov 25 11:23:11 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 11:23:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 11:23:11 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 11:23:11 2011] Source does appear to be extended
[Fri Nov 25 11:23:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 11:23:28 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 11:23:28 2011] Initial guess for spatial extent in simple fitting = 6.60"
[Fri Nov 25 11:23:28 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.983
[Fri Nov 25 11:23:28 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.60"
[Fri Nov 25 12:22:26 2011] fullrun_mos1_xmm0413180201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Nov 25 12:22:26 2011] fullrun_mos1_xmm0413180201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Nov 25 12:22:26 2011] Fit fullrun_mos1_xmm0413180201_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Nov 25 12:22:27 2011] fullrun_mos1_xmm0413180201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Nov 25 12:22:27 2011] fullrun_mos1_xmm0413180201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Nov 25 12:22:27 2011] Fit fullrun_mos1_xmm0413180201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Nov 25 15:11:13 2011] Spatial fit model total counts = 1072.990000, observed total counts = 1073.000000
[Fri Nov 25 15:11:13 2011] Offset between fit and detection position for source 1 = 0.015452 pixels
[Fri Nov 25 15:11:13 2011] 1070.119000 total counts/ 261.813000 bgd. counts: snr = 49.955142
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.015452 pixels
  Position = (429.7, 226.4) = 5 38 16.13 -69 23 30.7
  Extent = 6.3 (6.0-6.7)", rotation angle = 0
  Source counts = 808.3 +/- 32.7
  Background counts = 261.8
  Rate = 0.06 +/- 0.002
[Fri Nov 25 15:11:13 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 15:11:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 15:11:13 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 15:11:13 2011] Source does appear to be extended
[Fri Nov 25 15:11:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 15:11:30 2011] XMMSAS src. selection expression = ellipse(37338.005200, 19643.980600, 379.291811, 379.291811, 0.000000, X, Y)
[Fri Nov 25 15:11:30 2011] Writing source region out to fullrun_mos1_xmm0413180201_pi300-10000_pass1_cl_src1_src.reg
[Fri Nov 25 15:11:30 2011] Extracting stamp from image fullrun_mos1_xmm0413180201_pi300-10000_cl_sm2.00.img.gz, (408, 205) - (452, 248)
[Fri Nov 25 15:11:30 2011] XMMSAS bgd. selection expression = annulus(37338.005200, 19643.980600, 632.153018, 1264.306036, X, Y)
[Fri Nov 25 15:11:30 2011] Writing fullrun_mos1_xmm0413180201_pi300-10000_pass1_cl_src1.gif
[Fri Nov 25 15:11:33 2011] Mean detx,y = (7447.55, -10929.23) 
[Fri Nov 25 15:11:35 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Nov 25 15:11:44 2011] Binned source spectrum to 10 counts/bin
[Fri Nov 25 15:11:44 2011] Setting source spectrum file to fullrun_mos1_xmm0413180201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Nov 25 15:11:44 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0413180201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Nov 25 16:03:42 2011] Updating aperture counts using extracted products
[Fri Nov 25 16:03:42 2011] Error reading totcts from fullrun_mos1_xmm0413180201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Nov 25 16:03:42 2011] Calculating source flux in energy range 0.30-8.00
[Fri Nov 25 16:03:42 2011] Using photon index=1.80, rate=0.0605, arf fullrun_mos1_xmm0413180201_pi300-10000_pass1_cl_src1.arf
[Fri Nov 25 16:03:42 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Nov 25 16:03:42 2011] Updating source flux to 1.6e-12
[Fri Nov 25 16:04:54 2011] Reading fit data from xmm0413180201/analysis//spectral/fullrun_mos1_xmm0413180201_pi300-10000_pass1_cl_src1_pl.csv
[Fri Nov 25 16:04:54 2011] Spectral fit parameter nH value = 3.90656e+21
[Fri Nov 25 16:04:54 2011] Spectral fit parameter PhoIndex value = 5.16485
[Fri Nov 25 16:04:54 2011] Failed to get F(0.3-8.0) from xmm0413180201/analysis//spectral/fullrun_mos1_xmm0413180201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Nov 25 16:04:54 2011] Calculating source flux in energy range 0.30-8.00
[Fri Nov 25 16:04:54 2011] Using Nh = 3.9e+21, photon index=5.16, rate=0.0605, arf fullrun_mos1_xmm0413180201_pi300-10000_pass1_cl_src1.arf
[Fri Nov 25 16:04:54 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Nov 25 16:04:54 2011] Updating source flux to 9.6e-13