[Sat Jun 15 02:27:01 2013] Detection parameters:
  Position = (199.9, 324.9) = 8 49 26.60 -45 34 55.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 339.8 +/- 43.8
  Background counts = 342.2
  Rate = 0.008 +/- 0.001

[Sat Jun 15 02:27:10 2013] Off-axis axis estimate = 7.40'
[Sat Jun 15 02:27:43 2013] Using EEF radius (= 10.13 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 02:27:43 2013] Initial guess for spatial extent in simple fitting = 10.13"
[Sat Jun 15 02:27:43 2013] source mask rpix=2.3, npix_max = 31, mask sum = 21, frac = 0.656
[Sat Jun 15 02:27:43 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 10.13"
[Sat Jun 15 02:27:45 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_src13.ximg exists
[Sat Jun 15 02:27:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_src13.csv
[Sat Jun 15 02:27:45 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_src13_1.ximg exists
[Sat Jun 15 02:27:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_src13.csv
[Sat Jun 15 02:27:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 02:27:47 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sat Jun 15 02:27:47 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sat Jun 15 02:27:47 2013] Fit fullrun_mos2_xmm0412990601_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Sat Jun 15 02:28:19 2013] Spatial fit model total counts = 4024.590000, observed total counts = 3718.000000
[Sat Jun 15 02:28:19 2013] Offset between fit and detection position for source 9 = 6.994649 pixels
[Sat Jun 15 02:28:19 2013] Warning, changing simple spatial fit ID from 13 to 6
[Sat Jun 15 02:28:19 2013] 3882.544000 total counts/ 3643.250000 bgd. counts: snr = 3.964490
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 6.994649 pixels
  Position = (192.9, 324.4) = 8 49 29.49 -45 34 57.9
  Extent = 15.2 (8.8-20.0)", rotation angle = 0
  Source counts = 239.3 +/- 62.3
  Background counts = 3643.2
  Rate = 0.006 +/- 0.002
[Sat Jun 15 02:28:20 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 02:28:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 02:28:20 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 02:28:20 2013] Source does appear to be extended
[Sat Jun 15 02:28:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 02:28:20 2013] Source is confused with source 22
[Sat Jun 15 02:28:35 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 15 02:28:35 2013] Initial guess for spatial extent in simple fitting = 15.18"
[Sat Jun 15 02:28:35 2013] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.005
[Sat Jun 15 02:28:35 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 15.18"
[Sat Jun 15 02:28:36 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_src15.ximg exists
[Sat Jun 15 02:28:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_src15.csv
[Sat Jun 15 02:28:36 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_src15_1.ximg exists
[Sat Jun 15 02:28:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_src15.csv
[Sat Jun 15 02:28:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 02:28:38 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sat Jun 15 02:28:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sat Jun 15 02:28:38 2013] fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sat Jun 15 02:28:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sat Jun 15 02:28:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990601_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 02:29:05 2013] Warning, spatial fit 15 centroid is now closest to src. 22
[Sat Jun 15 02:29:05 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 02:29:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 02:29:05 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 02:29:05 2013] Source does appear to be extended
[Sat Jun 15 02:29:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 02:33:40 2013] XMMSAS src. selection expression = ellipse(16733.334000, 28178.330000, 910.752026, 910.752026, 0.000000, X, Y)
[Sat Jun 15 02:33:40 2013] Writing source region out to fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src9_src.reg
[Sat Jun 15 02:33:40 2013] Extracting stamp from image fullrun_mos2_xmm0412990601_pi300-10000_cl_sm2.00.img.gz, (141, 272) - (245, 377)
[Sat Jun 15 02:33:40 2013] XMMSAS bgd. selection expression = annulus(16733.334000, 28178.330000, 1517.920044, 3035.840087, X, Y) && !ellipse(17535.468307, 27884.333099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18166.528000, 26172.310000, 1304.016038, 1304.016038, 0.000000, X, Y) && !ellipse(20152.944000, 27092.670000, 1451.120042, 1451.120042, 0.000000, X, Y) && !ellipse(19847.440000, 27294.685000, 1413.976041, 1413.976041, 0.000000, X, Y) && !ellipse(18141.426971, 24370.988586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18631.590000, 28156.701200, 1508.280043, 1508.280043, 0.000000, X, Y) && !ellipse(16792.604000, 25947.250000, 1659.208048, 1659.208048, 0.000000, X, Y) && !ellipse(17066.835910, 25177.936200, 1373.512040, 926.332225, 174.771567, X, Y) && !ellipse(17779.523911, 26771.472260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19069.414000, 27964.780000, 2827.952081, 2827.952081, 0.000000, X, Y) && !ellipse(19219.099380, 26752.069305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20471.008087, 26565.784485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19522.796000, 27515.438000, 2902.240084, 2902.240084, 0.000000, X, Y) && !ellipse(20668.736000, 27231.832000, 2698.080078, 2698.080078, 0.000000, X, Y) && !ellipse(17422.017578, 25174.833221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19631.586060, 25780.076355, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 02:33:40 2013] Writing fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src9.gif
[Sat Jun 15 02:56:39 2013] Mean detx,y = (-7263.44, -5826.27) 
[Sat Jun 15 02:56:42 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 02:57:09 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 02:57:10 2013] Setting source spectrum file to fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Jun 15 02:57:10 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sat Jun 15 04:10:40 2013] Updating aperture counts using extracted products
[Sat Jun 15 04:10:40 2013] Total counts from fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 4209.00
[Sat Jun 15 04:10:40 2013] Total counts from fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src9_bgd.pi.gz = 15857.00
[Sat Jun 15 04:10:40 2013] Got source and background scale factors 2266231.000000, 9330219.000000
[Sat Jun 15 04:10:40 2013] User source parameters:
  Position = (192.9, 324.4) = 8 49 29.49 -45 34 57.9
  Extent = 15.2 (8.8-20.0)", rotation angle = 0
  Source aperture counts = 357.5 +/- 65.9
  Background aperture counts = 3851.5
  Rate = 0.009 +/- 0.002

[Sat Jun 15 04:10:51 2013] No arf file for this source, not re-computing flux
[Sat Jun 15 04:10:53 2013] Flag c found in src. 9 procflags, skipping spectral fitting
[Sat Jun 15 04:10:53 2013] Source 9 has no response, skipping
[Sat Jun 15 04:10:54 2013] xmm0412990601/analysis//spectral/fullrun_mos2_xmm0412990601_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete